MAX16065EVKIT#

MAX16065EVKIT# Datasheet

MAX16065 Evaluation Kit Evaluates MAX16065

Part	Datasheet
MAX16065EVKIT#	MAX16065EVKIT# (pdf)

PDF Datasheet Preview
MAX16065 Evaluation Kit Evaluates MAX16065 The MAX16065 evaluation kit EV kit provides a proven PCB layout that facilitates evaluation of the MAX16065 flash-configurable system manager with nonvolatile fault memory. The EV kit is a fully assembled and tested surface-mount board. The EV kit includes an on-board USB-to-JTAG and SMBus interface, facilitating communications between the host PC and the device. Two potentiometers and a set of loopback switches make it easy to evaluate the sequencing and monitoring functions of the device without requiring external power supplies. Headers are also provided to facilitate connection to an external application circuit. This EV kit data sheet assumes basic familiarity with the device. Refer to the MAX16065/MAX16066 IC data sheet for more detailed information. S USB Interface to Host PC S Easy-to-Use GUI Software S On-Board Loopback Switches for Stand-Alone Evaluation S On-Board Potentiometers to Simulate Fault Conditions S Convenient Test Points and Headers for Easy Evaluation S Proven PCB Layout S Fully Assembled and Tested Ordering Information appears at end of data sheet. EV Kit Contents List QTY 1 DESCRIPTION Circuit board assembly MAX16065EVKIT+ USB high-speed A-to-mini B cable, 5ft 1.5m Component List DESIGNATION C1, C2, C3, C4, C13, C15 C9, C10 QTY 7 3 4 2 1 0.1FF Q10%, 25V X7R ceramic capacitors 0603 TDK C1608X7R1E104K 1FF Q10%, 6.3V X5R ceramic capacitors 0603 TDK C1608X5R0J105K 18pF Q5%, 50V C0G ceramic capacitors 0603 TDK C1608C0G1H180J 2.2FF Q10%, 6.3V X5R ceramic capacitors 0603 TDK C1608X5R0J225K 4.7FF Q10%, 6.3V X5R ceramic capacitor 0603 TDK C1608X5R0J475K 0.01FF Q10%, 50V X7R ceramic capacitor 0603 TDK C1608X7R1H103K 10FF Q20%, 16V X5R ceramic capacitor 1206 TDK C3216X5R1C106M DESIGNATION D1, D2 EXT PWR F1 GND J1 J2 J3 J4 P1 P2 P3 P5 P6 P7 1 13 1 0 1FF Q20%, 16V X5R ceramic capacitor 0603 TDK C1608X5R1C105K 17.1V zener diodes 3 SOT23 Central Semi CMPZ5248B+ Red PC-mount test point 500mA fuse 2405 Black PC-mount test point 6-pin header 2-pin header 8-pin header 3-pin header Green LEDs USB mini-B connector Not installed, 8-pin header Not installed, 10-pin header Dual-row, 10-pin protected header 5-pin header 15-pin header 12-pin header Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at MAX16065 Evaluation Kit Evaluates MAX16065 DESIGNATION P8 Q1, Q2 R1, R2, R3 R4, R5, R6, R10, R12 R7, R13 R8, R9 R11 R14 R15, R16 R17, R18, R19 RP1 RP2 S7 S8, S9 QTY 1 2 0 1 2 3 1 6 1 2 DESCRIPTION 13-pin header n-channel MOSFETs Fairchild FDC5612 4.75kI Q1% resistors 0603 221I Q1% resistors 0603 10kI Q1% resistors 0603 33.2I Q1% resistors 0603 Not installed, resistor 2512 11kI Q1% resistor 0805 5kI slide potentiometers, 30mm 10kI Q1% resistors 0805 8 x 220I Q5% resistor array 8 x 10kI Q5% resistor array 8-position DIP switches SPST pushbutton switch SPDT slide switches Component List continued DESIGNATION U1 Y1 Y2 QTY 1 DESCRIPTION Microcontroller 56 TQFN-EP Maxim MAXQ2000-RBX+ USB peripheral controller 24 TQFN-EP Maxim MAX3420EETG+ Dual, low-noise, LDO linear regulator 6 SOT23 Maxim MAX8882EUTAQ+ 12-channel flash-configurable system manager with nonvolatile fault registers 48 TQFN-EP Maxim MAX16065ETM+ 12MHz crystal HCM49 20MHz crystal HCM49 Shunts MAX16065 EVALUATION KIT+ Component Suppliers SUPPLIER Central Semiconductor Fairchild Semiconductor TDK Corp. PHONE 631-435-1110 888-522-5372 847-803-6100 WEBSITE Note Indicate that you are using the MAX16065 when contacting these component suppliers. Quick Start • MAX16065 EV kit Required Equipment • User-supplied PC with a spare USB port Note In the following sections, software-related items are identified by bolding. Text in bold refers to items directly from the EV kit software. Procedure The EV kit is fully assembled and tested. Follow the steps below to verify board operation: 1 Make sure that jumper J1 VCC SEL is in the 5.0V position. Also make sure that jumper J2 CSBIAS is closed, jumper J3 I2C ADDR is set to low, and jumper J4 MON1-2 SE/DIFF is in the 1-2 position single ended . 2 Switches 1 and 2 in switch bank S1 loopbacks should be in the off position. All other switches in switch banks S1 and S2 should be in the on position. All switches in switch banks S3 EXT SEL , S4 PC SEL , and S5 PULLUP should be in the on position. Switch bank S6 switches 1 and 8 should be in the on position, but all other switches should be off. 3 Connect the EV kit to a PC using the provided USB cable. LED4 lights to indicate that the EV kit has power. 4 Install and launch the EV kit software. 5 Select I2C from the Connection menu. Make sure that Address is 0xA0 in the Address dialog box. Click OK. 6 From the File menu, select 7 Select the “MAX16065 EV Kit Demo.hex” file located in the software install folder and click OK. This action loads the device registers but not the flash memory with the demo configuration. 8 Click on the Datalogging tab. Move the enable switch S9 to the on position and note the monitored voltages. Ordering Information PART MAX16065EVKIT+ TYPE EV Kit +Denotes lead Pb -free and RoHS compliant. Maxim Integrated Products 21 5/11 Initial release MAX16065 Evaluation Kit Evaluates MAX16065 PAGES CHANGED Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 2011 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.

PDF Datasheet Preview

MAX16065 Evaluation Kit Evaluates MAX16065

The MAX16065 evaluation kit EV kit provides a proven PCB layout that facilitates evaluation of the MAX16065 flash-configurable system manager with nonvolatile fault memory. The EV kit is a fully assembled and tested surface-mount board.

The EV kit includes an on-board USB-to-JTAG and SMBus interface, facilitating communications between the host PC and the device. Two potentiometers and a set of loopback switches make it easy to evaluate the sequencing and monitoring functions of the device without requiring external power supplies. Headers are also provided to facilitate connection to an external application circuit.

This EV kit data sheet assumes basic familiarity with the device. Refer to the MAX16065/MAX16066 IC data sheet for more detailed information.

S USB Interface to Host PC S Easy-to-Use GUI Software S On-Board Loopback Switches for Stand-Alone

Evaluation S On-Board Potentiometers to Simulate Fault

Conditions S Convenient Test Points and Headers for Easy

Evaluation S Proven PCB Layout S Fully Assembled and Tested
Ordering Information appears at end of data sheet.

EV Kit Contents List

QTY 1

DESCRIPTION Circuit board assembly MAX16065EVKIT+ USB high-speed A-to-mini B cable, 5ft 1.5m

Component List

DESIGNATION C1, C2, C3, C4, C13, C15

C9, C10

QTY 7 3 4 2 1
0.1FF Q10%, 25V X7R ceramic capacitors 0603 TDK C1608X7R1E104K
1FF Q10%, 6.3V X5R ceramic capacitors 0603 TDK C1608X5R0J105K
18pF Q5%, 50V C0G ceramic capacitors 0603 TDK C1608C0G1H180J
2.2FF Q10%, 6.3V X5R ceramic capacitors 0603 TDK C1608X5R0J225K
4.7FF Q10%, 6.3V X5R ceramic capacitor 0603 TDK C1608X5R0J475K
0.01FF Q10%, 50V X7R ceramic capacitor 0603 TDK C1608X7R1H103K
10FF Q20%, 16V X5R ceramic capacitor 1206 TDK C3216X5R1C106M

DESIGNATION

D1, D2

EXT PWR F1

GND J1 J2 J3 J4

P1 P2 P3

P5 P6 P7
1 13 1 0
1FF Q20%, 16V X5R ceramic capacitor 0603 TDK C1608X5R1C105K
17.1V zener diodes 3 SOT23 Central Semi CMPZ5248B+ Red PC-mount test point 500mA fuse 2405 Black PC-mount test point 6-pin header 2-pin header 8-pin header 3-pin header Green LEDs USB mini-B connector Not installed, 8-pin header Not installed, 10-pin header Dual-row, 10-pin protected header 5-pin header 15-pin header 12-pin header

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at

MAX16065 Evaluation Kit Evaluates MAX16065

DESIGNATION P8

Q1, Q2

R1, R2, R3 R4, R5, R6, R10, R12

R7, R13 R8, R9

R11 R14 R15, R16 R17, R18, R19 RP1 RP2 S7 S8, S9

QTY 1
2 0 1 2 3 1 6 1 2

DESCRIPTION 13-pin header n-channel MOSFETs Fairchild FDC5612 4.75kI Q1% resistors 0603
221I Q1% resistors 0603
10kI Q1% resistors 0603 33.2I Q1% resistors 0603 Not installed, resistor 2512 11kI Q1% resistor 0805 5kI slide potentiometers, 30mm 10kI Q1% resistors 0805 8 x 220I Q5% resistor array 8 x 10kI Q5% resistor array 8-position DIP switches SPST pushbutton switch SPDT slide switches

Component List continued

DESIGNATION U1

Y1 Y2

QTY 1

DESCRIPTION Microcontroller 56 TQFN-EP Maxim MAXQ2000-RBX+

USB peripheral controller 24 TQFN-EP Maxim MAX3420EETG+

Dual, low-noise, LDO linear regulator 6 SOT23 Maxim MAX8882EUTAQ+
12-channel flash-configurable system manager with nonvolatile fault registers 48 TQFN-EP Maxim MAX16065ETM+
12MHz crystal HCM49 20MHz crystal HCM49 Shunts MAX16065 EVALUATION KIT+

Component Suppliers

SUPPLIER Central Semiconductor Fairchild Semiconductor TDK Corp.

PHONE 631-435-1110 888-522-5372 847-803-6100

WEBSITE

Note Indicate that you are using the MAX16065 when contacting these component suppliers.

Quick Start
• MAX16065 EV kit

Required Equipment
• User-supplied PC with a spare USB port

Note In the following sections, software-related items are identified by bolding. Text in bold refers to items directly from the EV kit software.

Procedure The EV kit is fully assembled and tested. Follow the steps below to verify board operation:
1 Make sure that jumper J1 VCC SEL is in the 5.0V position. Also make sure that jumper J2 CSBIAS is closed, jumper J3 I2C ADDR is set to low, and jumper J4 MON1-2 SE/DIFF is in the 1-2 position single ended .
2 Switches 1 and 2 in switch bank S1 loopbacks should be in the off position. All other switches
in switch banks S1 and S2 should be in the on position. All switches in switch banks S3 EXT SEL , S4 PC SEL , and S5 PULLUP should be in the on position. Switch bank S6 switches 1 and 8 should be in the on position, but all other switches should be off.
3 Connect the EV kit to a PC using the provided USB cable. LED4 lights to indicate that the EV kit has power.
4 Install and launch the EV kit software.
5 Select I2C from the Connection menu. Make sure that Address is 0xA0 in the Address dialog box. Click OK.
6 From the File menu, select
7 Select the “MAX16065 EV Kit Demo.hex” file located in the software install folder and click OK. This action loads the device registers but not the flash memory with the demo configuration.
8 Click on the Datalogging tab. Move the enable switch S9 to the on position and note the monitored voltages.
Ordering Information

PART MAX16065EVKIT+

TYPE EV Kit
+Denotes lead Pb -free and RoHS compliant.

Maxim Integrated Products 21
5/11

Initial release

MAX16065 Evaluation Kit Evaluates MAX16065

PAGES CHANGED

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
2011 Maxim Integrated Products

Maxim is a registered trademark of Maxim Integrated Products, Inc.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX16065EVKIT# Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX16065EVKIT# 647241