DS1922L-F5#W

DS1922L-F5#W Datasheet


DS1922L/DS1922T

Part Datasheet
DS1922L-F5#W DS1922L-F5#W DS1922L-F5#W (pdf)
PDF Datasheet Preview
DS1922L/DS1922T
iButton Temperature Loggers with 8KB Datalog Memory

The temperature loggers DS1922L/DS1922T are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings, taken at equidistant intervals ranging from 1s to 273hr, can be stored. Additionally, 512 bytes of SRAM store applicationspecific information and 64 bytes store calibration data. A mission to collect data can be programmed to begin immediately, after a user-defined delay, or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1922L/DS1922T are configured and communicate with a host-computing device through the serial protocol, which requires only a single data lead and a ground return. Each DS1922L/DS1922T is factory lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1922L/DS1922T to be mounted on almost any object, including containers, pallets, and bags.

High-Temperature Logging Process Monitoring, Industrial Temperature Monitoring

Temperature Logging in Cold Chain, Food Safety, Bio Science, and Pharmaceutical and Medical Products

Benefits and Features
• High Accuracy, Full-Featured Digital Temperature

Logger Simplifies Temperature Data Collection and Dissemination of Electronic Temperature Record
• Temperature Accuracy of ±0.5°C from -10°C to
+65°C DS1922L , ±0.5°C from +20°C to +75°C DS1922T , with Software Corrections
• Measures Temperature with 8-Bit 0.5°C or 11-Bit 0.0625°C Resolution
• Operating Temperature Range DS1922L -40°C to +85°C DS1922T 0°C to +125°C
• Automatically Wakes Up, Measures Temperature, and Stores Values in 8kB of Data-Log Memory in 8- or 16-Bit Format
• Sampling Rate from 1s Up to 273hr
• Programmable High and Low Trip Points for Temperature Alarms
• Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point
• 512 Bytes of General-Purpose Memory Plus 64 Bytes of Calibration Memory
• Two-Level Password Protection of All Memory and Configuration Registers
• Individually Calibrated in a NIST-Traceable Chamber
• Complies to Standard EN12830
• Rugged Construction Survives Harsh Environments
• Water Resistant Enclosure IP56 or Waterproof if Placed Inside DS9107 iButton Capsule Exceeds Water Resistant 3 ATM Requirements
• CE, FCC, and UL913 Certifications
• Simple Serial Port Interfaces to Most Microcontrollers
for Rapid Data Transfer
• Communicates to Host with a Single Digital Signal

Up to 15.4kbps at Standard Speed or Up to 125kbps in Overdrive Mode Using 1-Wire Protocol
• Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function
Ordering Information

PART

TEMP RANGE

PIN-PACKAGE

DS1922L-F5#
-40°C to +85°C

F5 Can

DS1922T-F5#
0°C to +125°C

F5 Can
#Denotes a RoHS-compliant device that may include lead Pb that is exempt under the RoHS requirements.

Examples of Accessories

PART

ACCESSORY

DS9096P DS9101 DS9093RA DS9093A DS9092

Self-Stick Adhesive Pad Multipurpose Clip Mounting Lock Ring Snap-in FOB iButton Probe

Common iButton Device Features and Pin Configuration appear at end of data sheet.
iButton and 1-Wire are registered trademarks of Maxim Integrated Products, Inc.

DS1922L/DS1922T
iButton Temperature Loggers with 8KB Datalog Memory

Absolute Maximum Ratings

IO Voltage Range to GND to +6V IO Sink Operating Temperature Range

DS1922L to +85°C DS1922T to +125°C

Junction Temperature Storage Temperature Range*
to +85°C* DS1922T to +125°C*
*Storage or operation above +50°C significantly reduces battery life.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Electrical Characteristics

VPUP = +3.0V to +5.25V.

PARAMETER

CONDITIONS

Operating Temperature

DS1922L Note 1 TA

DS1922T Note 1

IO PIN GENERAL DATA
1-Wire Pullup Resistance Input Capacitance Input Load Current High-to-Low Switching Threshold Input Low Voltage Low-to-High Switching Threshold Switching Hysteresis Output Low Voltage

Recovery Time Note 2

RPUP CIO IL VTL VIL VTH VHY VOL
tREC

Notes 2, 3 Note 4 IO pin at VPUP Notes 5, 6 Notes 2, 7 Notes 5, 8 Note 9 At 4mA Note 10 Standard speed, RPUP = Overdrive speed, RPUP = Overdrive speed, directly prior to reset pulse RPUP =

Rising-Edge Hold-Off Time
10/09 Deleted the standard part numbers from the Ordering Information table

Updated UL certificate reference deleted from the tW1L specification in the Electrical Characteristics table applied note 14 to the tW0L specification in the Electrical
4/11
1, 3, 4, 13, 25
added paragraph on validation certificates to Detailed Description section added
more details on the Device Samples Counter in the Other Indicators section

Removed the UL 913 5th Ed. Compliance statement from the Common iButton Device
6/13 Features section and iButton Can Physical Specification table reworded the Electrical

Characteristics table Note 19
11/13 Added the Busy state during Copy Scratchpad to the Command-Specific 1-Wire

Communication and 1-Wire Communication Examples sections
3/15 Updated Benefits and Features and Common iButton Device Features section
45, 46 1, 51
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
2015 Maxim Integrated Products, Inc. | 52
More datasheets: DEMAME9PA101 | DBMME25PF | EDB2432BCPE-8D-F-D | LTST-T675KGKSKT | DCMAM62PF0 | DDMN24C7SNA197 | LTW-M140SZS40 | HSDL-4271 | DDM24H7SNA197 | KIT315MPXY8300A


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DS1922L-F5#W Datasheet file may be downloaded here without warranties.

Datasheet ID: DS1922L-F5#W 647166