73S1210F-44M/F/PD

73S1210F-44M/F/PD Datasheet

73S1209F / 73S1210F Product Brief Turnkey Smart Card Reader ICs with Generic Serial Host interface, optional PINpad, I/Os and power management features

Part	Datasheet
73S1210F-44M/F/PD	73S1210F-44M/F/PD (pdf)

PDF Datasheet Preview
73S1209F / 73S1210F Product Brief Turnkey Smart Card Reader ICs with Generic Serial Host interface, optional PINpad, I/Os and power management features The Teridian 73S1209F and 73S1210F ICs are state-of-the-art, self-contained smart card reader Integrated Circuits that will find their places everywhere a smart card reader function single or multi-slots needs to be implemented, particularly when development time and investment must be minimized. These ICs take care of both electrical and protocol layers to communicate with smart cards or SIMs. They are built around the Teridian 80515 CPU core, and can run either Teridian turnkey embedded firmware, or alternatively customer’s code, that can be developed and loaded directly into the on-chip 32KB Flash, or delivered by Teridian as a dedicated masked-ROM version. Implementation of a smart card reader can be a time-consuming task, requiring in-depth smart card experience, especially when it comes to implementing the software protocol layer in compliance with applicable standards like EMV or NDS. The Teridian 73S1209F and 73S1210F ICs, used in conjunction with Teridian ready-to-use PC/SC firmware and optional host drivers will help dramatically simplify the design and shorten development and certification timescales. Whenever compliance with ISO-7816, EMV Windows WHQL, NDS * or with GSM11-11 standards is required, the Teridian 73S1209F and 73S1210F ICs are the right solutions. The chips can immediately connect to any host controller through a serial link. While the Teridian IC takes care of the smart card protocol layer, the host controller is freed up from the smart card timing constraints, and it only has to exchange simple PC/SC commands through the serial link to control the smart card reader function. Teridian ICs can be connected with external 73S8010x ICs to extend the number of smart card slots for instance in the case additional SAM cards must be supported like in Point-of-Sales terminals . Teridian 73S1209F and 73S1210F ICs differ from their power supply voltage ranges and power management options. * 73S1209F only Formal approval pending. Key Applications SIM Readers in wireless devices WiMAX, GPRS, GSM etc Point-of-Sales terminals • Immediate compliance with EMV4.1 Level 1 Payphones Vending and ticketing machines Audio/Video • Conditional Access and payment slots in digital STB, PVR and Integrated DTVs General purpose smart card and SIM readers Key Advantages Self-contained smart card reader IC Market’s lowest cost Tiny QFN 7x7 or 8x8mm package with very few external passive components Low power Wide choice of power supply options Turnkey firmware available from Teridian no 3rd party • Compliant with PC/SC, ISO7816 and EMV4.1 specifications • Features a Power Down mode accessible form the host • Supports Plug & Play over serial interface • Windows TM XP driver available * • WindowsTM CE / Mobile driver available * • Drivers for Linux and other OS Upon request Or for custom developments • A complete set of ISO-7816, EMV4.1 & PC/ SC libraries are available * Contact Teridian for availability and conditions Chip and PIN 73S1209F 73S1210F Product Brief 73S1209F-73S1210F Block Diagram Security fuses Prevent from unauthorized intrusion Analog DC input Voltage detection,battery supervision... JTAG-like Interface Powerful & Cost-effective In-Circuit-Emulation & programming Main oscillator 4MHZ to 12MHz Requires an external crystal Memories: • 32 32KB Flash KB / ROM • 256 B Scratchpad IRAM • 2 KB RAM user XRAM X12IN X12OUT High performance 80515 core: • 1 clock cycle / instruction • Up to 24MIPS available As powerful as an ARM7 • Instruction set compatible with industry-standard 8051/8052 Allows encryption of PIN, encryption of dataexchange over the USB, etc. 5x6 PINpad interface Hardware scan & Debounce Keypress interrupt 8 9 in 73S1209F QFN68 General purpose I/Os Can be set independently as inputs, outputs, edge or level sensitive, interrupt LED outputs Current programmable 73S1210F Only 73S1209F Only Available in QFN68 Flavors only ROW0 ROW1 ROW2 ROW3 ROW4 ROW5 COL0 COL1 COL2 COL3 COL4 USR0 USR1 USR2 USR3 USR4 USR5 USR6 USR7 USR8 LED0 LED1 GND RXD TXD PLL and TIMEBASES Main OSCILLATOR ICE INTERFACE VOLTAGE REFERENCE AND FUSE CIRCUITRY VPD REGULATOR KEYPAD INTERFACE FLASH/ROM PROGRAM MEMORY

PDF Datasheet Preview

73S1209F / 73S1210F Product Brief Turnkey Smart Card Reader ICs with Generic Serial Host interface, optional PINpad, I/Os and power management features

The Teridian 73S1209F and 73S1210F ICs are state-of-the-art, self-contained smart card reader Integrated Circuits that will find their places everywhere a smart card reader function single or multi-slots needs to be implemented, particularly when development time and investment must be minimized. These ICs take care of both electrical and protocol layers to communicate with smart cards or SIMs. They are built around the Teridian 80515 CPU core, and can run either Teridian turnkey embedded firmware, or alternatively customer’s code, that can be developed and loaded directly into the on-chip 32KB Flash, or delivered by Teridian as a dedicated masked-ROM version. Implementation of a smart card reader can be a time-consuming task, requiring in-depth smart card experience, especially when it comes to implementing the software protocol layer in compliance with applicable standards like EMV or NDS. The Teridian 73S1209F and 73S1210F ICs, used in conjunction with Teridian ready-to-use PC/SC firmware and optional host drivers will help dramatically simplify the design and shorten development and certification timescales. Whenever compliance with ISO-7816, EMV Windows WHQL, NDS * or with GSM11-11 standards is required, the Teridian 73S1209F and 73S1210F ICs are the right solutions. The chips can immediately connect to any host controller through a serial link. While the Teridian IC takes care of the smart card protocol layer, the host controller is freed up from the smart card timing constraints, and it only has to exchange simple PC/SC commands through the serial link to control the smart card reader function. Teridian ICs can be connected with external 73S8010x ICs to extend the number of smart card slots for instance in the case additional SAM cards must be supported like in Point-of-Sales terminals . Teridian 73S1209F and 73S1210F ICs differ from their power supply voltage ranges and power management options. * 73S1209F only Formal approval pending.

Key Applications

SIM Readers in wireless devices WiMAX, GPRS, GSM etc Point-of-Sales terminals
• Immediate compliance with EMV4.1 Level 1 Payphones Vending and ticketing machines Audio/Video
• Conditional Access and payment slots in digital STB, PVR and Integrated DTVs General purpose smart card and SIM readers

Key Advantages

Self-contained smart card reader IC Market’s lowest cost Tiny QFN 7x7 or 8x8mm package with very few external passive components Low power Wide choice of power supply options Turnkey firmware available from Teridian no 3rd party
• Compliant with PC/SC, ISO7816 and EMV4.1 specifications
• Features a Power Down mode accessible form the host
• Supports Plug & Play over serial interface
• Windows TM XP driver available *
• WindowsTM CE / Mobile driver available *
• Drivers for Linux and other OS Upon request Or for custom developments
• A complete set of ISO-7816, EMV4.1 & PC/ SC libraries are available
* Contact Teridian for availability and conditions

Chip and PIN
73S1209F 73S1210F Product Brief
73S1209F-73S1210F Block Diagram

Security fuses

Prevent from unauthorized intrusion

Analog DC input

Voltage detection,battery supervision...

JTAG-like Interface

Powerful & Cost-effective In-Circuit-Emulation & programming

Main oscillator 4MHZ to 12MHz

Requires an external crystal

Memories:
• 32 32KB Flash KB / ROM
• 256 B Scratchpad IRAM
• 2 KB RAM user XRAM

X12IN X12OUT

High performance 80515 core:
• 1 clock cycle / instruction
• Up to 24MIPS available As powerful as an ARM7
• Instruction set compatible with industry-standard 8051/8052

Allows encryption of PIN, encryption of dataexchange over the USB, etc.
5x6 PINpad interface

Hardware scan & Debounce Keypress interrupt
8 9 in 73S1209F QFN68 General purpose I/Os

Can be set independently as inputs, outputs, edge or level sensitive, interrupt

LED outputs

Current programmable
73S1210F Only 73S1209F Only Available in QFN68 Flavors only

ROW0 ROW1 ROW2 ROW3 ROW4 ROW5 COL0 COL1 COL2 COL3 COL4

USR0 USR1 USR2 USR3 USR4 USR5 USR6 USR7 USR8

LED0 LED1 GND RXD TXD

PLL and TIMEBASES

Main OSCILLATOR

ICE INTERFACE

VOLTAGE REFERENCE AND FUSE CIRCUITRY

VPD REGULATOR

KEYPAD INTERFACE

FLASH/ROM PROGRAM MEMORY

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 73S1210F-44M/F/PD Datasheet file may be downloaded here without warranties.

Datasheet ID: 73S1210F-44M/F/PD 647138