QM110T
QM110T Datasheet
QM110T is an easy to mount LCD digital panel meter. The module can measure ambient temperature via a built-in sensor and outside temperature via an external sensor not supplied . The module uses NTC temperature sensors to ensure high accuracy over a wide temperature range. To mount the module, the user need only drill a single 5.5mm / 7/32" hole in the panel. The module is fitted to the panel by locating its screw threaded stud through the hole, fitting the washer and tightening the nut provided. The module's connecting wires pass through the hollow stud into the target application, where they can be easily plugged or soldered into place. A rubber seal is included, providing splashproof protection for the unit when fitted to the meter during installation.
| Part | Datasheet |
|---|---|
QM110T |
QM110T (pdf) |
| PDF Datasheet Preview |
|---|
| QM 110T Single Hole Mounting Thermometer QM110T is an easy to mount LCD digital panel meter. The module can measure ambient temperature via a built-in sensor and outside temperature via an external sensor not supplied . The module uses NTC temperature sensors to ensure high accuracy over a wide temperature range. To mount the module, the user need only drill a single 5.5mm / 7/32" hole in the panel. The module is fitted to the panel by locating its screw threaded stud through the hole, fitting the washer and tightening the nut provided. The module's connecting wires pass through the hollow stud into the target application, where they can be easily plugged or soldered into place. A rubber seal is included, providing splashproof protection for the unit when fitted to the meter during installation. Single Hole Mounting 4 Measurement Ranges 12.5mm / LCD Digit Height Compatible with NTC Sensors 5-Wire Connection Splashproof Seal THERMOMETER Panel 5 Wires - 30cm Nut Washer Shown Actual Size Easy Mounting Thermometer Specification Measurement °C range Internal Sensor ranges °F range Internal Sensor °C range External Sensor °F range External Sensor Resolution Internal Sensor -20 to +140°C Resolution External Sensor +140 to +170°C +170 to +220°C Accuracy* °C range Both Sensors °F range Both Sensors Sample rate Operating temperature range Supply voltage** Min. -10 +14 -20 -4 -10 4 Typ. 1 2 4 5 10 Stock Number QM 110T Max. Unit +50 +122 +220 +428 +50 28 °C °F °C °F °C °F °C °F °C °F °C °F °C ±2 count °F ±4 count sample/sec °C V d.c. SAFETY * Using external NTC sensor with 25°C and a 25 to 85°C Beta value of 3977, for example BC Components The module may require recalibration. To ensure maximum accuracy, recalibrate periodically. Calibrate the module at top end of measurement range. |
| More datasheets: RL855-181K | RL855-182K | RL855-220K | RL855-221K | RL855-222K | RL855-271K | RL855-152K | IPD180N10N3GATMA1 | IPD180N10N3GBTMA1 | RED202A |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QM110T Datasheet file may be downloaded here without warranties.