SBT-16-RA-M11-MPE

SBT-16-RA-M11-MPE Datasheet

PhlatLight SBT16

Part	Datasheet
SBT-16-RA-M11-MPE	SBT-16-RA-M11-MPE (pdf)

Related Parts	Information
SBT-16-G-M11-MPD	SBT-16-G-M11-MPD
SBT-16-B-M11-EPB	SBT-16-B-M11-EPB
SBT-16-RA-M11-MPD	SBT-16-RA-M11-MPD
SBT-16-G-M11-MPE	SBT-16-G-M11-MPE
SBT-16-B-M11-EPC	SBT-16-B-M11-EPC

PDF Datasheet Preview
PhlatLight SBT16 Projection Chipset Optical Power Arbitrary Unit Technology Overview Luminus Devices’ Projection Technology PT is an innovative solid-state light source created to replace arc lamps in projection systems, enabling a new category of lamp-free projectors. Enabled by unique use of Photonic Lattice technology, PhlatLight chipsets represent a major breakthrough in brightness that delivers all the benefits of solid state light sources in projections applications: - Wide color gamut for vivid colors, exceeds NTSC. - Environmentally friendly technology - Mercury-fre. - Instant start and re-start - no more wait time. - High reliability no more lamp replacement. - Electronic control of color points and light intensity on a frame by frame basis PhlatLight products benefit from numerous innovations in the domain of packaging, thermal management and optical coupling that allow designers to achieve efficient light engine designs and deliver high screen brightness. Angular Intensity Distribution -Example GR EEN , B LU E R ED -100 -80 -60 -40 -20 0 20 40 60 80 100 Angle degrees • Matched RGB Chipset with 1.6mm2 emitting area designed for small, pico projector and “value” pocket projector applications • Photonic lattice technology for very high surface brightness • Wide color gamut RED 623 nm, GREEN 525 nm, BLUE 460 nm typical dominant wavelength • Single emitting area per color allows for collection with single lens for simplified optics • 16:10 aspect ratio optimized for WVGA, WXGA or other wide aspect ratio micro-displays • Uniform surface emission • Compact, small footprint surface mount SMT package, with built-in alignment features • RoHS compliant EU-2002/95/EC Directive • Large dynamic range allows optimum performance in both battery-powered and AC powered systems • Optimized for Micro-Display diagonal sizes ranging from to • Compatible with all micro-display technologies including DLP and LCoS. Confidential 2011 Luminus Devices, Inc. - All Rights Reserved Updated 05/17/11 SBT-16 Ordering Part Numbers Ordering Part Number1 Color Min Flux or Power Bin2 Availability SBT-16-R-J11-MPB SBT-16-R-J11-MPC 1A Red Red Bin Kit, PhlatLight SBT16 surface mount device consisting of a 1.6mm2 LED, mounted on a ceramic substrate. SBT-16-G-J11-MPA SBT-16-G-J11-MPB Green SBT-16-G-J11-MPC Green Bin Kit, PhlatLight SBT16 surface mount device consisting of a 1.6mm2 LED, mounted on a ceramic substrate SBT-16-G-J11-MPD SBT-16-B-J11-EPA SBT-16-B-J11-EPB Blue Blue Bin Kit, PhlatLight SBT16 surface mount device consisting of a 1.6mm2 LED, mounted on a ceramic substrate Note 1 Ordering part numbers represent bin kits group of bins that are shippable for a given ordering part number Note 2 See Bin Kit and Flux / Power bin definitions on page 3 PhlatLight Ordering Part Number Nomenclature Product Family Chip Area Color Package Configuration Bin Kit 2 SBT Surface mount SBR SBT device soldered to a starboard 16 1.6mm2 R=Red G=Green B=Blue J11 9.0mm X 7.25mm See page 3 for Bin Kit definition Note 1 For Tape and Reel Packaging option, please add -TR to end of ordering part number. E.g. SBT-16-R-J11-MPB-TR Note 2 A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. In order to ensure availability, individual flux or power bins are not orderable. Packaging Option TR= tape & reel blank=tray/pack EXAMPLES SBT-16-R-J11-MPB is comprised of Red Flux Bins 1A, 1B, 1C and 1D Packaging option trays / packs SBT-16-R-J11-MPB-TR is comprised of Red Flux Bins 1A, 1B, 1C and 1D Packaging option tape and reel SBR-16-R-J11-MPB is SBT-16 Red device soldered to a starboard see p.10 . Note Available in sample quantities only for prototyping. SBT-16 Bin Kit1 and Flux / Power Bin2,3 ,4 Definitions Note Please refer to ordering part number table on page 2 for Bin Kit availability Red Flux Bins Bin 1A Bin 1B Bin 1C Bin 1D Red Bin Flux Range lm SBT-16-R-J11-MPB 155-180 180-215 215-245 245-275 SBT-16-R-J11-MPC Bin 1E 275-300 Bin 1F 300-330 Bin 1G 330-360 Bin 1H nd Bin 1J nd Green Flux Bins Green Bin Flux Range lm SBT-16-G-J11-MPA SBT-16-G-J11-MPB SBT-16-G-J11-MPC SBT-16-G-J11-MPD Bin 1A 315-355 Bin 1B 355-395 Bin 1C 395-430 Bin 1D 430-470 Bin 1E 470-510 Bin 1F 510-550 Bin 1G 550-600 Bin 1H 600-660 Bin 1J 660-725 Blue Power Bins Blue Bin Power Range W SBT-16-B-J11-EPA SBT-16-B-J11-EPB Bin 1A Bin 1B Bin 1C Bin 1D Bin 1E Bin 1F Bin 1G Bin 1H Bin 1J nd Note 1 Bin Kits are defined by a group of flux or power bins. Only one flux bin will be shipped in each individual pack or reel. A shipment will contain packs or reels of different allowed flux or power bins for a particular ordering part number. In order to ensure availability, individual Flux or Power bins are not ordereable. Note 2 Luminus maintains a tolerance of +/-6% on flux and power measurements Note 3 SBT-16 LEDs are tested for luminous flux and radiometric at 4A, single pulse 20mS and placed into one of the above flux or power bins. Flux and power bins have been defined, but not all defined bins are currently populated. Note 4 Flux bin limits for Red and Green and power bin limits for Blue devices apply across the entire dominant wavelength range for each color. See dominant wavelength range for each color on page 4 Optical and Electrical Characteristics Green Blue Unit Emitting Area Emitting Area Dimensions Characteristics at Test Drive Current, IF1 Test Peak Drive Current1 Peak Luminous Flux 1,2 ,3 Radiometric Flux 1, 2, 3 1.6x1.0 Dominant Wavelength1 λdmin λdmax FWHM - Spectral bandwidth at 50% of Chromaticity Coordinates 4,5 VFmin Forward Voltage VFmax Dynamic Resistance Ωdyn Characteristics at Pulsed Drive Current, IF for information only 6 Reference Duty Cycle Reference Peak Drive Current Peak Luminuous Flux2 Device Thermal Characteristics 1.6x1.0 470 516 525 535 40 50 400 1.6x1.0 mm2 mmxmm Thermal Coefficient of Photometric Flux % / ºC Thermal Coefficient of Radiometric Flux % / ºC Forward Voltage Temperature Coefficient mV / ºC Note 1 Note 2 Note 3 Note 4 Note 5 Note 6: Test conditions 4A, single pulse, 20ms, test temperature not controlled. Total flux from emitting area Luminus maintains a tolerance of +/-6% on flux and power measurements In CIE 1931 chromaticity diagram coodinates, normalized to X+Y+Z=1 For reference only Typical performance based on SBT-16 mounted on Al coreboard. Operation at 720Hz, 4A, pulsed at the specified duty cycles and at constant heat sink temperature Ths = 40ºC. See Thermal Resistance section for Ths definition. •Luminus Ordering Part Number •Luminus_Product_Description: Luminus Internal Use •Optional Fields may include Custom- er’s Part Number Gross Weight g 101 Sample labels - For illustration only Tape and Reel Outline For detailed drawing of Tape and Reel, please refer to-1000 available from Luminus DIMENSIONS ARE IN mm. INCH TRAILER mm 19 POCKETS OF EMPTY POCKETS LOADED POCKETS 250 PCS LEADER 457.2mm 29 POCKETS OF EMPTY POCKETS DETAIL A SCALE 1 TAPE DIMENSIONS UNREELING DIRECTION UNREELING DIRECTION LEADER END POCKETS DETAIL B SCALE 2 3 REEL DIMENSIONS 180 7 25 Packing Configuration Tape and Reel Packing Reel Tape and Reel is enclosed in moisture barrier bag Labeling Specification TBD Qty/Reel 250 Reel Diameter mm 180 Sample label - Illustration Tape and Reel Label Fields Label fields are subject to change •6-digit BX-Number Luminus Internal Use •Luminus Ordering Part Number •Flux Bin •Quantity of devices in the pack •Optional Fields may include Custom- er’s Part Number Gross Weight kg TBA Sample labels - For illustration only History of Changes Date 3/19/10 6/25/10 11/08/10 04/12/11 5/17/11 Description of Change Preliminary Specifications Add preliminary specifications for Green LED Binkit C Update Max Junction Temperature for Green and Blue devices Update Tray packing specifications Add Bin Kit and Bin definitions p.3 Add ordering part number information Add additional Bin Kit definitions Update luminous flux and optical power specifications per test calibration update Add preliminary Tape and Reel packaging specifications Correct typographical error on p.2 The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. PhlatLight is a registered trademark of Luminus Devices, Inc., all rights reserved. This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903;7,345,416 7,348,603 7,388,233 7,391,059 7,417,367 Patents Pending in the U.S. and other countries.

PDF Datasheet Preview

PhlatLight SBT16

Projection Chipset

Optical Power Arbitrary Unit

Technology Overview

Luminus Devices’ Projection Technology PT is an innovative solid-state light source created to replace arc lamps in projection systems, enabling a new category of lamp-free projectors. Enabled by unique use of Photonic Lattice technology, PhlatLight chipsets represent a major breakthrough in brightness that delivers all the benefits of solid state light sources in projections applications:
- Wide color gamut for vivid colors, exceeds NTSC.
- Environmentally friendly technology - Mercury-fre.
- Instant start and re-start - no more wait time.
- High reliability no more lamp replacement.
- Electronic control of color points and light intensity on a frame by frame basis

PhlatLight products benefit from numerous innovations in the domain of packaging, thermal management and optical coupling that allow designers to achieve efficient light engine designs and deliver high screen brightness.

Angular Intensity Distribution -Example

GR EEN , B LU E R ED
-100 -80 -60 -40 -20 0 20 40 60 80 100 Angle degrees
• Matched RGB Chipset with 1.6mm2 emitting area designed for small, pico projector and “value” pocket projector applications
• Photonic lattice technology for very high surface brightness
• Wide color gamut RED 623 nm, GREEN 525 nm, BLUE 460 nm
typical dominant wavelength
• Single emitting area per color allows for collection with single lens for simplified optics
• 16:10 aspect ratio optimized for WVGA, WXGA or other wide aspect ratio micro-displays
• Uniform surface emission
• Compact, small footprint surface mount SMT package, with
built-in alignment features
• RoHS compliant EU-2002/95/EC Directive
• Large dynamic range allows optimum performance in both battery-powered and AC powered systems
• Optimized for Micro-Display diagonal sizes ranging from to
• Compatible with all micro-display technologies including DLP and LCoS.

Confidential 2011 Luminus Devices, Inc. - All Rights Reserved

Updated 05/17/11
SBT-16 Ordering Part Numbers
Ordering Part Number1

Color

Min Flux or Power Bin2

Availability

SBT-16-R-J11-MPB SBT-16-R-J11-MPC
1A Red

Red Bin Kit, PhlatLight SBT16 surface mount device consisting of a 1.6mm2 LED, mounted on a ceramic substrate.

SBT-16-G-J11-MPA

SBT-16-G-J11-MPB

Green

SBT-16-G-J11-MPC

Green Bin Kit, PhlatLight SBT16 surface mount device consisting of a 1.6mm2 LED, mounted on a ceramic substrate

SBT-16-G-J11-MPD

SBT-16-B-J11-EPA SBT-16-B-J11-EPB

Blue

Blue Bin Kit, PhlatLight SBT16 surface mount device consisting of a 1.6mm2 LED, mounted on a ceramic substrate
Note 1 Ordering part numbers represent bin kits group of bins that are shippable for a given ordering part number Note 2 See Bin Kit and Flux / Power bin definitions on page 3
PhlatLight Ordering Part Number Nomenclature

Product Family

Chip Area

Color

Package Configuration

Bin Kit 2

SBT Surface mount SBR SBT device soldered to a starboard
16 1.6mm2

R=Red G=Green B=Blue

J11 9.0mm X 7.25mm

See page 3 for Bin Kit definition
Note 1 For Tape and Reel Packaging option, please add -TR to end of ordering part number. E.g. SBT-16-R-J11-MPB-TR Note 2 A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. In order to ensure availability, individual flux or power bins are not orderable.

Packaging Option

TR= tape & reel blank=tray/pack

EXAMPLES SBT-16-R-J11-MPB is comprised of Red Flux Bins 1A, 1B, 1C and 1D Packaging option trays / packs SBT-16-R-J11-MPB-TR is comprised of Red Flux Bins 1A, 1B, 1C and 1D Packaging option tape and reel SBR-16-R-J11-MPB is SBT-16 Red device soldered to a starboard see p.10 . Note Available in sample quantities only for prototyping.

SBT-16 Bin Kit1 and Flux / Power Bin2,3 ,4 Definitions
Note Please refer to ordering part number table on page 2 for Bin Kit availability

Red Flux Bins

Bin 1A

Bin 1B

Bin 1C

Bin 1D

Red Bin Flux Range lm SBT-16-R-J11-MPB
155-180
180-215
215-245
245-275

SBT-16-R-J11-MPC

Bin 1E 275-300

Bin 1F 300-330

Bin 1G 330-360

Bin 1H nd

Bin 1J nd

Green Flux Bins Green Bin Flux Range lm

SBT-16-G-J11-MPA SBT-16-G-J11-MPB SBT-16-G-J11-MPC SBT-16-G-J11-MPD

Bin 1A 315-355

Bin 1B 355-395

Bin 1C 395-430

Bin 1D 430-470

Bin 1E 470-510

Bin 1F 510-550

Bin 1G 550-600

Bin 1H 600-660

Bin 1J 660-725

Blue Power Bins Blue Bin Power Range W

SBT-16-B-J11-EPA SBT-16-B-J11-EPB

Bin 1A

Bin 1B

Bin 1C

Bin 1D

Bin 1E

Bin 1F

Bin 1G

Bin 1H

Bin 1J nd
Note 1 Bin Kits are defined by a group of flux or power bins. Only one flux bin will be shipped in each individual pack or reel. A shipment will contain packs or reels of different allowed flux or power bins for a particular ordering part number. In order to ensure availability, individual Flux or Power bins are not ordereable.

Note 2 Luminus maintains a tolerance of +/-6% on flux and power measurements

Note 3 SBT-16 LEDs are tested for luminous flux and radiometric at 4A, single pulse 20mS and placed into one of the above flux or power bins. Flux and power bins have been defined, but not all defined bins are currently populated.

Note 4 Flux bin limits for Red and Green and power bin limits for Blue devices apply across the entire dominant wavelength range for each color. See dominant wavelength range for each color on page 4

Optical and Electrical Characteristics

Green

Blue

Unit

Emitting Area

Emitting Area Dimensions

Characteristics at Test Drive Current, IF1

Test Peak Drive Current1 Peak Luminous Flux 1,2 ,3

Radiometric Flux 1, 2, 3
1.6x1.0

Dominant Wavelength1
λdmin
λdmax

FWHM - Spectral bandwidth at 50% of

Chromaticity Coordinates 4,5

VFmin

Forward Voltage

VFmax

Dynamic Resistance
Ωdyn

Characteristics at Pulsed Drive Current, IF for information only 6

Reference Duty Cycle

Reference Peak Drive Current Peak Luminuous Flux2

Device Thermal Characteristics
1.6x1.0
470 516 525 535 40
50 400
1.6x1.0
mm2 mmxmm

Thermal Coefficient of Photometric Flux
% / ºC

Thermal Coefficient of Radiometric Flux
% / ºC

Forward Voltage Temperature Coefficient
mV / ºC

Note 1 Note 2 Note 3 Note 4 Note 5 Note 6:

Test conditions 4A, single pulse, 20ms, test temperature not controlled. Total flux from emitting area Luminus maintains a tolerance of +/-6% on flux and power measurements In CIE 1931 chromaticity diagram coodinates, normalized to X+Y+Z=1 For reference only Typical performance based on SBT-16 mounted on Al coreboard. Operation at 720Hz, 4A, pulsed at the specified duty cycles and at constant heat sink temperature Ths = 40ºC. See Thermal Resistance section for Ths definition.
•Luminus Ordering Part Number
•Luminus_Product_Description:

Luminus Internal Use
•Optional Fields may include Custom-
er’s Part Number

Gross Weight g 101

Sample labels - For illustration only

Tape and Reel Outline

For detailed drawing of Tape and Reel, please refer to-1000 available from Luminus

DIMENSIONS ARE IN mm. INCH

TRAILER mm 19 POCKETS OF

EMPTY POCKETS

LOADED POCKETS 250 PCS

LEADER 457.2mm 29 POCKETS OF EMPTY POCKETS

DETAIL A SCALE 1

TAPE DIMENSIONS

UNREELING DIRECTION

UNREELING DIRECTION

LEADER END

POCKETS

DETAIL B

SCALE 2 3

REEL DIMENSIONS
180 7 25

Packing Configuration Tape and Reel

Packing Reel Tape and Reel is enclosed in moisture barrier bag

Labeling Specification TBD

Qty/Reel 250

Reel Diameter mm 180

Sample label - Illustration

Tape and Reel Label Fields Label fields are subject to change
•6-digit BX-Number Luminus Internal Use
•Luminus Ordering Part Number
•Flux Bin
•Quantity of devices in the pack
•Optional Fields may include Custom-
er’s Part Number

Gross Weight kg TBA

Sample labels - For illustration only

History of Changes

Date 3/19/10 6/25/10
11/08/10 04/12/11
5/17/11

Description of Change

Preliminary Specifications

Add preliminary specifications for Green LED Binkit C Update Max Junction Temperature for Green and Blue devices Update Tray packing specifications
Add Bin Kit and Bin definitions p.3 Add ordering part number information

Add additional Bin Kit definitions Update luminous flux and optical power specifications per test calibration update Add preliminary Tape and Reel packaging specifications Correct typographical error on p.2

The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. PhlatLight is a registered trademark of Luminus Devices, Inc., all rights reserved.

This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903;7,345,416 7,348,603 7,388,233 7,391,059 7,417,367 Patents Pending in the U.S. and other countries.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SBT-16-RA-M11-MPE Datasheet file may be downloaded here without warranties.

Datasheet ID: SBT-16-RA-M11-MPE 646694