RUE300

RUE300 Datasheet

RUE Selection Guide and Product Data

Part	Datasheet
RUE300	RUE300 (pdf)

Related Parts	Information
RUE135	RUE135
RUE900	RUE900
RUE600	RUE600
RUE250U-2	RUE250U-2
RUE700	RUE700
RUE090	RUE090
RUE500	RUE500
RUE250	RUE250
RUE110	RUE110
RUE400	RUE400
RUE160	RUE160
RUE185	RUE185
RUE800	RUE800

PDF Datasheet Preview
RUE Selection Guide and Product Data This section has two parts • A Selection Guide that walks you through the process of selecting the correct RUE device for a circuit. • Product Data that outlines electrical characteristics, physical characteristics, agency recognitions, environmental specifications, component layouts, tape and reel specifications, and ordering information for RUE devices. RUE Selection Guide Follow these seven steps to select a PolySwitch RUE device for a circuit: Define the operating parameters for the circuit. These include: • Maximum ambient operating temperature • Normal operating current • Maximum operating voltage RUE is 30 V maximum • Maximum interrupt current Select the RUE device that accommodates the circuit’s maximum ambient operating temperature and normal operating current. Compare the RUE device’s maximum operating voltage and maximum interrupt current with the circuit’s to be sure the circuit does not exceed the device ratings. Check the RUE device’s time-to-trip to be sure it will protect the circuit. Verify that the circuit’s ambient operating temperatures are within the RUE device’s operating temperature range. Verify that the RUE device’s dimensions fit the application’s space considerations. Independently evaluate and test the suitability and performance of the RUE device in the application. TUV Rheinland Raychem Circuit Protection Devices RUE Devices 141 Radial Leaded Define the circuit’s operating parameters. Fill in the following information about the circuit: Maximum ambient operating temperature Normal operating current Maximum operating voltage RUE is 30 V max. Maximum interrupt current Select the PolySwitch RUE device that will accommodate the circuit’s maximum ambient operating temperature and normal operating current. Look across the top of the table below to find the temperature that most closely matches the circuit’s maximum ambient operating temper- ature. Look down that column to find the value equal to or greater than the circuit’s normal operating current. Now look to the far left of that row to find the part number for the RUE device that will best accommo- date the circuit. The thermal derating curve located on the next page is a normalized representation of the data in the table below. IHold vs. temperature Part number RUE090 RUE110 RUE135 RUE160 RUE185 RUE250 RUE300 RUE400 RUE500 RUE600 RUE700 RUE800 RUE900 Maximum ambient operating temperatures °C 20° 40° Ordering information Product description RUE090-2 RUE090-AP RUE110-2 RUE110-AP RUE135-2 RUE135-AP RUE160-2 RUE160-AP RUE185-2 RUE185-AP RUE250-2 RUE250-AP RUE300-2 RUE300-AP RUE400-2 RUE400-AP RUE500 RUE600 RUE700 RUE800 RUE900 Consult Factory Bag quantity 500 Tape and reel AMMO quantity pack 3000 2000 3000 2000 3000 2000 3000 2000 3000 2000 3000 2000 1500 1000 1500 * * * * 1000 * * * * * Standard package 10000 15000 10000 15000 10000 15000 10000 15000 10000 15000 10000 15000 10000 7500 5000 10000 7500 5000 10000 Blank = Packaged in bags = Tape and reel -AP = AMMO pack = 25.4-mm 1.0-inch minimum lead length = Kinked leads = Straight leads = Uncoated part contact factory for specifications Current rating Raychem Circuit Protection Devices Part marking system V 30 U135 NJ2K Example Radial Leaded V - 30 U Voltage rating Raychem symbol

PDF Datasheet Preview

RUE Selection Guide and Product Data

This section has two parts
• A Selection Guide that walks you through the process of
selecting the correct RUE device for a circuit.
• Product Data that outlines electrical characteristics,
physical characteristics, agency recognitions, environmental specifications, component layouts, tape and reel specifications, and ordering information for RUE devices.

RUE Selection Guide

Follow these seven steps to select a PolySwitch RUE device for a circuit:

Define the operating parameters for the circuit.

These include:
• Maximum ambient operating temperature
• Normal operating current
• Maximum operating voltage RUE is 30 V maximum
• Maximum interrupt current

Select the RUE device that accommodates the circuit’s maximum
ambient operating temperature and normal operating current.

Compare the RUE device’s maximum operating voltage and maximum interrupt current with the circuit’s to be sure the circuit does not exceed the device ratings.

Check the RUE device’s time-to-trip to be sure it will protect the circuit.

Verify that the circuit’s ambient operating temperatures are within the RUE device’s operating temperature range.

Verify that the RUE device’s dimensions fit the application’s space considerations.

Independently evaluate and test the suitability and performance of the RUE device in the application.

TUV Rheinland

Raychem Circuit Protection Devices

RUE Devices 141

Radial Leaded

Define the circuit’s operating parameters.

Fill in the following information about the circuit:

Maximum ambient operating temperature

Normal operating current

Maximum operating voltage RUE is 30 V max.

Maximum interrupt current

Select the PolySwitch RUE device that will accommodate the
circuit’s maximum ambient operating temperature and
normal operating current.

Look across the top of the table below to find the temperature that
most closely matches the circuit’s maximum ambient operating temper-
ature. Look down that column to find the value equal to or greater than
the circuit’s normal operating current. Now look to the far left of that
row to find the part number for the RUE device that will best accommo-
date the circuit.

The thermal derating curve located on the next page is a normalized
representation of the data in the table below.

IHold vs. temperature

Part number RUE090 RUE110 RUE135 RUE160 RUE185 RUE250 RUE300 RUE400 RUE500 RUE600 RUE700 RUE800 RUE900

Maximum ambient operating temperatures °C
20°
40°
Ordering information

Product description RUE090-2 RUE090-AP RUE110-2 RUE110-AP RUE135-2 RUE135-AP RUE160-2 RUE160-AP RUE185-2 RUE185-AP RUE250-2 RUE250-AP RUE300-2 RUE300-AP RUE400-2 RUE400-AP RUE500 RUE600 RUE700 RUE800 RUE900
*Consult Factory

Bag quantity 500

Tape and reel AMMO
quantity
pack
3000
2000
3000
2000
3000
2000
3000
2000
3000
2000
3000
2000
1500
1000
1500
* * * * *
1000 * * * * *

Standard package 10000 15000 10000 15000 10000 15000 10000 15000 10000 15000 10000 15000 10000
7500 5000 10000 7500 5000 10000

Blank = Packaged in bags
= Tape and reel
-AP = AMMO pack
= 25.4-mm 1.0-inch minimum lead length
= Kinked leads
= Straight leads
= Uncoated part contact factory for specifications

Current rating

Raychem Circuit Protection Devices

Part marking system

V 30 U135 NJ2K

Example

Radial Leaded

V - 30 U

Voltage rating Raychem symbol

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived RUE300 Datasheet file may be downloaded here without warranties.

Datasheet ID: RUE300 646532