NANOSMD200LR-2
NANOSMD200LR-2 Datasheet
PRODUCT nanoSMD200LR-2
| Part | Datasheet |
|---|---|
NANOSMD200LR-2 |
NANOSMD200LR-2 (pdf) |
| PDF Datasheet Preview |
|---|
| PTC Devices Overcurrent Protection Device PRODUCT nanoSMD200LR-2 Specification Status Released Maximum Electrical Rating Voltage 6.0VDC Short Circuit Current 50A Notes Termination Finish NiAu Drawing not to scale For battery application only Marking T TABLE I. DIMENSIONS: MIN MAX MIN MAX MIN MAX MIN MAX TABLE II. PERFORMANCE RATINGS CURRENT RATINGS** TIME TO TRIP** AMPERES AT 0°C AT 20°C HOLD TRIP HOLD TRIP AMPERES AT 60°C HOLD TRIP SECONDS AT 20°C, 9.5A RESISTANCE VALUES OHMS AT 20°C MIN MAX* TRIPPED-STATE POWER DISSIPATION** WATTS AT 20°C, 6.0V *Maximum resistance is measured 1 hour after reflow. **Values specified were determined using PCB’s with x ounce copper traces. Agency Recognition Reference Document Precedence Effectivity CAUTION: UL, CSA PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ELV Compliant Pb-Free * Halogen Free refers to: Halogen Free* PTC Devices Overcurrent Protection Device PRODUCT nanoSMD200LR-2 Recommended pad layout mm. Recommended reflow profile Profile Feature Average ramp up rate Tsmax to Tp Preheat • Temperature min. Tsmin • Temperature max. Tsmax • Time tsmin to tsmax Time maintained above • Temperature TL • Time tL |
| More datasheets: MX29GL128EHT2I-90G | GS-ADK-PROV-IOSWAC | MIKROE-2704 | FW300A1 | FW250A1 | SFH250 | SFH250V | LTL-307GE | LCM-60U | HE3621A6012 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived NANOSMD200LR-2 Datasheet file may be downloaded here without warranties.