1210L450SLWR
1210L450SLWR Datasheet
1210L Series
| Part | Datasheet |
|---|---|
1210L450SLWR |
1210L450SLWR (pdf) |
| PDF Datasheet Preview |
|---|
| 1210L Series Device Specification Pending ELECTRICAL CHARACTERISTICS I hold A 1210L450SL 1210L500SL I trip V max I max A Vdc A Pd max W Maximum Time-to-Trip Current Time Sec. Resistance R min Ω R 1max Ω Note Ihold Itrip Vmax Imax Pd Rmin R1max = Hold current maximum current device will pass without tripping in 20℃ still air. = Trip Current minimum current at which the device will trip in 20℃ still air. = Maximum voltage device can withstand without damage at rated current Imax = Maximum fault current device can withstand without damage at rated voltage Vmax = Power dissipated from device when in the tripped state at 20℃ still air. = Minimum resistance of device in initial un-soldered state. = Maximum resistance of device at 20℃ measured one hour after tripping or reflow soldering of 260℃ for 20 sec. Caution :Operation beyond the specified rating may result in damage and possible arcing and flame. Figure Solder Pad Layout mm PHYSICAL DIMENSIONS mm 1210L450SL 1210L500SL Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 1210L SL Series Specifications are subject to change without notice. THERMAL DERATING CHART Ihold/Itrip Amps Recommended Data -40°C -20°C Ambient Operation Temperature 0°C 23°C 40°C 50°C 60°C 1210L450SL Ihold Itrip 1210L500SL Ihold Itrip 70°C 85°C 1210L SL Series Specifications are subject to change without notice. |
| More datasheets: MMC5.7104K100J35TR12 | MDM-25PSB-A174 | APTM50DAM38CTG | C26P | FLASHPRO5 | LA 50-S | DB-TSSOP-LPC922 | MDM-25SH041K | IDT5T9110BBGI | IDT5T9110BBGI8 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1210L450SLWR Datasheet file may be downloaded here without warranties.