LTL42KE6N

LTL42KE6N Datasheet

LTL42KE6N

Part	Datasheet
LTL42KE6N	LTL42KE6N (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * High luminous intensity output. * Popular T-1 diameter package. * Selected minimum intensities. * Wide viewing angle. * General purpose leads. * Reliable and rugged. Package Dimensions LTL42KE6N Lens Red Transparent Source Color AlInGaP Red Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL42KE6N BNS-OD-C131/A4 Page 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Maximum Rating 75 90 30 5 -40°C to + 100°C -55°C to + 100°C 260°C for 5 Seconds Unit mW mA/°C V Part No. LTL42KE6N BNS-OD-C131/A4 Page 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25℃ Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Symbol Min. Typ. Max. Unit Test Condition IF = 20mA mcd Note 1 deg Note 2 Fig.5 Measurement Fig.1 nm Note 4 IF = 20mA uA VR = 5V pF VF = 0 , f = 1MHz NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Iv classification code is marked on each packing bag. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. LTL42KE6N BNS-OD-C131/A4 Page 3 of 10

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* High luminous intensity output. * Popular T-1 diameter package. * Selected minimum intensities. * Wide viewing angle. * General purpose leads. * Reliable and rugged.

Package Dimensions

LTL42KE6N

Lens

Red Transparent

Source Color

AlInGaP Red

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL42KE6N BNS-OD-C131/A4

Page 1 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25℃

Maximum Rating 75 90 30 5 -40°C to + 100°C -55°C to + 100°C
260°C for 5 Seconds

Unit mW mA/°C V

Part No. LTL42KE6N BNS-OD-C131/A4

Page 2 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25℃

Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width

Symbol Min.

Typ.

Max. Unit

Test Condition

IF = 20mA mcd

Note 1 deg Note 2 Fig.5

Measurement

Fig.1
nm Note 4

IF = 20mA
uA VR = 5V
pF VF = 0 , f = 1MHz

NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Iv classification code is marked on each packing bag. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.

Part No. LTL42KE6N BNS-OD-C131/A4

Page 3 of 10

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL42KE6N Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL42KE6N 646061