LTL2V3EU3JS

LTL2V3EU3JS Datasheet

Part No. LTL2V3EUJS

Part	Datasheet
LTL2V3EU3JS	LTL2V3EU3JS (pdf)

Related Parts	Information
LTL2V3EUJS	LTL2V3EUJS

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Features * Lead Pb free product RoHS compliant. * High luminous intensity output. * Low power consumption. * High efficiency. * Uniform light pattern 36° * Versatile mounting on P.C. board or panel. * I.C. Compatible / low current requirements Package Dimensions Part No. LTL2V3EUJS Lens Water clear Source Color AlInGaP Red Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm unless otherwise noted. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL2V3EUJS BNS-OD-C131/A4 Page 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Maximum Rating 120 150 50 5 -40°C to + 100°C -55°C to + 100°C 260°C for 5 Seconds Unit mW mA/℃ V Part No. LTL2V3EUJS BNS-OD-C131/A4 Page 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25°C Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Symbol IV λP λd Min. 2500 32 Typ. 4200 36 626 625 Max. 630 Unit Test Condition IF = 20mA mcd Note 1,5 deg Note 2 Fig.5 Measurement nm Fig.1 nm Note 4 Spectral Line Half-Width V IF = 20mA µA VR = 5V pF VF = 0 , f = 1MHz NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Iv classification code is marked on each packing bag. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. The Iv guarantee should be added ±15% Part No. LTL2V3EUJS BNS-OD-C131/A4

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Features * Lead Pb free product RoHS compliant. * High luminous intensity output. * Low power consumption. * High efficiency. * Uniform light pattern 36° * Versatile mounting on P.C. board or panel. * I.C. Compatible / low current requirements

Package Dimensions

Part No. LTL2V3EUJS

Lens Water clear

Source Color AlInGaP Red

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm unless otherwise noted. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL2V3EUJS BNS-OD-C131/A4

Page 1 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25℃

Maximum Rating 120 150 50 5 -40°C to + 100°C -55°C to + 100°C
260°C for 5 Seconds

Unit mW mA/℃ V

Part No. LTL2V3EUJS BNS-OD-C131/A4

Page 2 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25°C

Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength

Symbol IV
λP λd

Min. 2500 32

Typ. 4200
36 626 625

Max. 630

Unit Test Condition IF = 20mA
mcd Note 1,5
deg Note 2 Fig.5 Measurement
nm Fig.1
nm Note 4

Spectral Line Half-Width

V IF = 20mA
µA VR = 5V
pF VF = 0 , f = 1MHz

NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Iv classification code is marked on each packing bag. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device. The Iv guarantee should be added ±15%

Part No. LTL2V3EUJS BNS-OD-C131/A4

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL2V3EU3JS Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL2V3EU3JS 646045