LTL-433Y

LTL-433Y Datasheet

Part No. LTL-433Y

Part	Datasheet
LTL-433Y	LTL-433Y (pdf)

PDF Datasheet Preview
LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only * Low power consumption. * Most suitable for use like level indicator. * Excellent uniformity of light emittance. * Long life solid state reliability. * I.C. compatible. Package Dimensions Part No. LTL-433Y Lens Yellow Diffused Source Color Yellow Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL-433Y BNS-OD-C131/A4 Page 1 of 7 LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width Continuous Forward Current Derating Linear From 50℃ Maximum Rating 60 20 5 -55℃ to + 100℃ -55℃ to + 100℃ 260℃ for 5 Seconds Unit mW mA/℃ V Part No. LTL-433Y BNS-OD-C131/A4 Page 2 of 7 LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25℃ Parameter Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity Viewing Angle IF = 10mA mcd Note 1,4 deg Note 2 Fig.6 Peak Emission Wavelength Dominant Wavelength Measurement Fig.1 nm Note 3 Spectral Line Half-Width Forward Voltage V IF = 20mA uA VR = 5V Capacitance pF VF = 0 , f = 1MHz Note Luminous intensity is measured with a light sensor and filter combination that approximates the CIE Commission International De L'Eclairage eye-response curve.

PDF Datasheet Preview

LITE-ON TECHOLOGY CORPORATION

Property of Lite-On Only
* Low power consumption. * Most suitable for use like level indicator. * Excellent uniformity of light emittance. * Long life solid state reliability. * I.C. compatible.

Package Dimensions

Part No. LTL-433Y

Lens

Yellow Diffused

Source Color

Yellow

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL-433Y BNS-OD-C131/A4

Page 1 of 7

LITE-ON TECHOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25℃

Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width Continuous Forward Current Derating Linear From 50℃

Maximum Rating 60 20 5 -55℃ to + 100℃ -55℃ to + 100℃
260℃ for 5 Seconds

Unit mW mA/℃ V

Part No. LTL-433Y BNS-OD-C131/A4

Page 2 of 7

LITE-ON TECHOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25℃

Parameter

Symbol Min. Typ. Max. Unit Test Condition

Luminous Intensity Viewing Angle

IF = 10mA mcd

Note 1,4 deg Note 2 Fig.6

Peak Emission Wavelength

Dominant Wavelength

Measurement

Fig.1
nm Note 3

Spectral Line Half-Width

Forward Voltage

V IF = 20mA
uA VR = 5V

Capacitance
pF VF = 0 , f = 1MHz

Note Luminous intensity is measured with a light sensor and filter combination that approximates the CIE Commission International De L'Eclairage eye-response curve.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL-433Y Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL-433Y 645995