LTL-4211N

LTL-4211N Datasheet

Part No. LTL-4211N

Part	Datasheet
LTL-4211N	LTL-4211N (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * Lead Pb free product RoHS compliant. * High Intensity. * Popular T-1 diameter package. * Selected minimum intensities. * Wide viewing angle. * General purpose leads. * Reliable and rugged. Package Dimensions Part No. LTL-4211N Lens Red Diffused Source Color Bright Red Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm unless otherwise noted. Protruded resin under flange is 1.0mm max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL-4211N BNS-OD-C131/A4 Page 1 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Maximum Rating 40 60 15 5 -55℃ to + 100℃ -55℃ to + 100℃ 260℃ for 5 Seconds Unit mW mA/℃ V Part No. LTL-4211N BNS-OD-C131/A4 Page 2 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25℃ Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Symbol IV λP λd Min. Typ. Max. Unit Test Condition IF = 10mA 50 mcd Note 1,4 deg Note 2 Fig.6 Measurement Fig.1 nm Note 3 Forward Voltage V IF = 20mA 100 uA VR = 5V Capacitance pF VF = 0 , f = 1MHz Note Luminous intensity is measured with a light sensor and filter combination that approximates the CIE Commission International De L'Eclairage eye-response curve. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. The Iv guarantee should be added ±15% Part No. LTL-4211N BNS-OD-C131/A4

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* Lead Pb free product RoHS compliant. * High Intensity. * Popular T-1 diameter package. * Selected minimum intensities. * Wide viewing angle. * General purpose leads. * Reliable and rugged.

Package Dimensions

Part No. LTL-4211N

Lens Red Diffused

Source Color Bright Red

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm unless otherwise noted. Protruded resin under flange is 1.0mm max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL-4211N BNS-OD-C131/A4

Page 1 of 9

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25℃

Maximum Rating 40 60 15 5 -55℃ to + 100℃ -55℃ to + 100℃
260℃ for 5 Seconds

Unit mW mA/℃ V

Part No. LTL-4211N BNS-OD-C131/A4

Page 2 of 9

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25℃

Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width

Symbol IV
λP λd

Min. Typ. Max. Unit Test Condition

IF = 10mA
50 mcd

Note 1,4
deg Note 2 Fig.6

Measurement

Fig.1
nm Note 3

Forward Voltage

V IF = 20mA
100 uA VR = 5V

Capacitance
pF VF = 0 , f = 1MHz

Note Luminous intensity is measured with a light sensor and filter combination that approximates the CIE Commission International De L'Eclairage eye-response curve.
is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device. The Iv guarantee should be added ±15%

Part No. LTL-4211N BNS-OD-C131/A4

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL-4211N Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL-4211N 645955