867135200

867135200 Datasheet

86710-0000 86711-0000

Part	Datasheet
867135200	867135200 (pdf)

PDF Datasheet Preview
Termination Tooling • Complete kits for fiber optic terminations • Kits for most industry standard connectors • Quick and consistent terminations • Unique tools support Molex practices - Curing oven with individually timed nests - Precision cleave tool - controlled fiber lengths - Constant pressure polishing tool The true measure of a fiber optic connector’s performance is in the terminated state. For this reason, Molex has expended a great deal of engineering talent and resources developing the termination processes and tooling required to terminate fiber optic connectors. The result of this effort is a unique set of tools and procedures for quick, reliable and consistent terminations. The Molex termination tool kit provides all the tools necessary to terminate a variety of industry standard fiber optic connectors. Packaged in a durable carrying case, the kit contains the necessary polishing pads, stripping and crimping tools and enough consumables to terminate approximately 50 connectors. Additionally, the kit contains a unique curing oven, cleave tool and polishing fixture for repeatable results with minimal training. Curing Oven The Molex curing oven is designed to maximize operator output by eliminating the need for batch curing. It has either 6 simplex connectors or 2 duplex connectors independently controlled cavities and a curing cycle of 5 minutes. A connector placed in a cavity activates a timer in that cavity which then signals the completion of a curing cycle by lighting a red LED and sounding a buzzer. Cleave Tool The Molex cleave tool is designed to repeatedly and accurately cleave the fiber at a controlled length just above the surface of the ferrule. This eliminates the need for a bead of epoxy and extensive operator training. The result is a substantial reduction in polishing time and a significant improvement in production yield. Polishing Fixture Consistent and repeatable PC physical contact terminations are easily achieved with the constant pressure Molex polishing tool. The fixture incorporates a spring loaded nest that provides uniform downward pressure on the ferrule tip. With this feature, operator variability is virtually eliminated. MOLEX FIBER OPTICS DIVISION 5224 Katrine Avenue, Downers Grove, IL 60515 / Tel 800-A1-FIBER or 630 512-8787 Web: Termination Tooling Termination Tooling Standard Part Numbers Order Number 86710-0000 86711-0000 ST* termination tool kit with 110V curing oven ST termination tool kit with 220V curing oven 86713-0000 86714-0000 STII† termination tool kit with 110V curing oven STII termination tool kit with 220V curing oven 86753-0000 86754-0000 FC termination tool kit with 110V curing oven FC termination tool kit with 220V curing oven 86763-0000 86764-0000 SC termination tool kit with 110V curing oven SC termination tool kit with 220V curing oven 86755-0000 86756-0000 FC, APC termination tool kit with 110V curing oven FC, APC termination tool kit with 220V curing oven 86765-0000 86766-0000 SC, APC termination tool kit with 110V curing oven SC, APC termination tool kit with 220V curing oven 86720-0000 86721-0000 SMA termination tool kit with 110V curing oven SMA termination tool kit with 220V curing oven 86730-0000 86731-0000 FDDI termination tool kit with 110V curing oven FDDI termination tool kit with 220V curing oven 86740-0000 termination tool kit with 110V curing oven 86741-0000 ESCON termination tool kit with 220V curing oven *ST is a trademark of Lucent Technologies †STII is a trademark of Lucent Technologies is a registered trademark of International Business Machines Corporation Kit Contents Kit Contents for ST, STII, FC, SC, FC/APC, SC/APC & SMA Order Number Description

PDF Datasheet Preview

Termination Tooling
• Complete kits for fiber optic terminations
• Kits for most industry standard connectors
• Quick and consistent terminations
• Unique tools support Molex practices
- Curing oven with individually timed nests - Precision cleave tool - controlled fiber lengths - Constant pressure polishing tool

The true measure of a fiber optic connector’s performance is in the terminated state. For this reason, Molex has expended a great deal of engineering talent and resources developing the termination processes and tooling required to terminate fiber optic connectors. The result of this effort is a unique set of tools and procedures for quick, reliable and consistent terminations.

The Molex termination tool kit provides all the tools necessary to terminate a variety of industry standard fiber optic connectors. Packaged in a durable carrying case, the kit contains the necessary polishing pads, stripping and crimping tools and enough consumables to terminate approximately 50 connectors. Additionally, the kit contains a unique curing oven, cleave tool and polishing fixture for repeatable results with minimal training.

Curing Oven

The Molex curing oven is designed to maximize operator output by eliminating the need for batch curing. It has either 6 simplex connectors or 2 duplex connectors independently controlled cavities and a curing cycle of 5 minutes. A connector placed in a cavity activates a timer in that cavity which then signals the completion of a curing cycle by lighting a red LED and sounding a buzzer.

Cleave Tool

The Molex cleave tool is designed to repeatedly and accurately cleave the fiber at a controlled length just above the surface of the ferrule. This eliminates the need for a bead of epoxy and extensive operator training. The result is a substantial reduction in polishing time and a significant improvement in production yield.

Polishing Fixture Consistent and repeatable PC physical contact terminations are easily achieved with the constant pressure Molex polishing tool. The fixture incorporates a spring loaded nest that provides uniform downward pressure on the ferrule tip. With this feature, operator variability is virtually eliminated.

MOLEX FIBER OPTICS DIVISION 5224 Katrine Avenue, Downers Grove, IL 60515 / Tel 800-A1-FIBER or 630 512-8787 Web:

Termination Tooling

Termination Tooling

Standard Part Numbers

Order Number
86710-0000 86711-0000

ST* termination tool kit with 110V curing oven ST termination tool kit with 220V curing oven
86713-0000 86714-0000

STII† termination tool kit with 110V curing oven STII termination tool kit with 220V curing oven
86753-0000 86754-0000

FC termination tool kit with 110V curing oven FC termination tool kit with 220V curing oven
86763-0000 86764-0000

SC termination tool kit with 110V curing oven SC termination tool kit with 220V curing oven
86755-0000 86756-0000

FC, APC termination tool kit with 110V curing oven FC, APC termination tool kit with 220V curing oven
86765-0000 86766-0000

SC, APC termination tool kit with 110V curing oven SC, APC termination tool kit with 220V curing oven
86720-0000 86721-0000

SMA termination tool kit with 110V curing oven SMA termination tool kit with 220V curing oven
86730-0000 86731-0000

FDDI termination tool kit with 110V curing oven FDDI termination tool kit with 220V curing oven
86740-0000
termination tool kit with 110V curing oven
86741-0000

ESCON termination tool kit with 220V curing oven
*ST is a trademark of Lucent Technologies
†STII is a trademark of Lucent Technologies
is a registered trademark of International Business Machines Corporation

Kit Contents

Kit Contents for ST, STII, FC, SC, FC/APC, SC/APC & SMA

Order Number Description

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 867135200 Datasheet file may be downloaded here without warranties.

Datasheet ID: 867135200 649987