LTL-1CHEE

LTL-1CHEE Datasheet

LTL-1CHEE

Part	Datasheet
LTL-1CHEE	LTL-1CHEE (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. compatible/low current requirement. * mm diameter package. Package Dimensions LTL-1CHEE Lens Red Transparent Source Color Hi-Eff.Red NOTES All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL-1CHEE BNS-OD-C131/A4 Page 1 of 7 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at Maximum Rating 100 90 30 5 to + to + for 5 Seconds Unit mW Part No. LTL-1CHEE BNS-OD-C131/A4 Page 2 of 7 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical Optical Characteristics at Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Symbol IV Min. Typ. Max. Unit Test Condition IF = 10mA mcd Note 1,4 deg Note 2 Fig.6 Measurement Fig.1 632 nm Note 3 Forward Voltage V IF = 20mA 100 VR = 5V Capacitance pF VF = 0 , f = 1MHz Note Luminous intensity is measured with a light sensor and filter combination that approximates the CIE Commission International De L'Eclairage eye-response curve. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. The Iv guarantee should be added

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. compatible/low current requirement. * mm diameter package.

Package Dimensions

LTL-1CHEE

Lens

Red Transparent

Source Color

Hi-Eff.Red

NOTES All dimensions are in millimeters inches . Tolerance is unless otherwise noted.

Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL-1CHEE BNS-OD-C131/A4

Page 1 of 7

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at

Maximum Rating 100
90 30 5 to + to + for 5 Seconds

Unit mW

Part No. LTL-1CHEE BNS-OD-C131/A4

Page 2 of 7

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical Optical Characteristics at

Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width

Symbol IV

Min. Typ. Max. Unit Test Condition

IF = 10mA mcd

Note 1,4
deg Note 2 Fig.6

Measurement

Fig.1
632 nm Note 3

Forward Voltage

V IF = 20mA
100 VR = 5V

Capacitance
pF VF = 0 , f = 1MHz

Note Luminous intensity is measured with a light sensor and filter combination that approximates the CIE Commission International De L'Eclairage eye-response curve.
is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength, is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device. The Iv guarantee should be added

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL-1CHEE Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL-1CHEE 645915