C164CI8EMDBKXUMA1

C164CI8EMDBKXUMA1 Datasheet

C164CI/SI C164CL/SL

Part	Datasheet
C164CI8EMDBKXUMA1	C164CI8EMDBKXUMA1 (pdf)

Related Parts	Information
C164CI8E25MDBKXUMA1	C164CI8E25MDBKXUMA1
C164CI8EMCBKXUMA1	C164CI8EMCBKXUMA1

PDF Datasheet Preview
Data Sheet, V2.0, May 2001 C164CI/SI C164CL/SL 16-Bit Single-Chip Microcontroller Microcontrollers Never stop thinking. Edition 2001-05 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany Infineon Technologies AG All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet, V2.0, May 2001 C164CI/SI C164CL/SL 16-Bit Single-Chip Microcontroller Microcontrollers Never stop thinking. C164CI 2001-05 V2.0 Previous Version: 1999-08 1998-02 Advance Information Converted to Infineon layout Operating frequency up to 25 MHz 1 et al. References to Flash removed Timer Unit with three timers 1, 12, 73 On-chip XRAM described Derivative table updated Supply voltage is 5 V Functionality of reduced CAPCOM6 corrected Timer description improved 29, 30 Sections “Oscillator Watchdog” and “Power Management” added POCON reset values adjusted 41 to 73 Parameter section reworked 1 These changes refer to the last two versions. Version 1998-02 covers OTP and ROM derivatives, while version 1999-08 ist the most recent one. Ordering Information The ordering code for Infineon microcontrollers provides an exact reference to the required product. This ordering code identifies • the derivative itself, i.e. its function set, the temperature range, and the supply voltage • the package and the type of delivery. For the available ordering codes for the C164CI please refer to the “Product Catalog Microcontrollers”, which summarizes all available microcontroller variants. Note The ordering codes for Mask-ROM versions are defined for each product after verification of the respective ROM code. Introduction The C164CI derivatives of the Infineon C166 Family of full featured single-chip CMOS microcontrollers are especially suited for cost sensitive applications. They combine high CPU performance up to million instructions per second with high peripheral functionality and enhanced IO-capabilities. They also provide clock generation via PLL and various on-chip memory modules such as program ROM or OTP, internal RAM, and extension RAM. VAREF VAGND VDD VSS XTAL1 XTAL2 RSTIN RSTOUT NMI EA ALE RD WR/WRL C164CI Figure 1 Logic Symbol Data Sheet Port 0 16 Bit Port 1 16 Bit Port 3 9 Bit Port 4 6 Bit Port 8 4 Bit Port 5 8 Bit MCL04869 V2.0, 2001-05 Pin Configuration top view C164CI/SI C164CL/SL 80 VAGND 79 P5.3/AN3 78 P5.2/AN2 77 P5.1/AN1 76 P5.0/AN0 75 P8.3/CC19IO/* 74 P8.2/CC18IO/* 73 P8.1/CC17IO/* 72 P8.0/CC16IO/* 71 NMI 70 RSTOUT 69 RSTIN 68 P1H.7/A15/CC27IO 67 P1H.6/A14/CC26IO 66 P1H.5/A13/CC25IO 65 P1H.4/A12/CC24IO 64 P1H.3/A11/EXIN/T7IN 63 P1H.2/A10/CC6POS2/EX2IN 62 P1H.1/A9/CC6POS1/EX1IN 61 VDD VAREF 1 P5.4/AN4/T2EUD 2 P5.5/AN5/T4EUD 3 P5.6/AN6/T2IN 4 P5.7/AN7/T4IN 5 VSS 6 VDD 7 P3.4/T3EUD 8 P3.6/T3IN 9 P3.8/MRST 10 P3.9/MTSR 11 P3.10/TxD0 12 P3.11/RxD0 13 P3.12/BHE/WRH 14 P3.13/SCLK 15 P3.15/CLKOUT/FOUT 16 P4.0/A16/CS3 17 P4.1/A17/CS2 18 P4.2/A18/CS1 19 VSS 20 C164CI 60 VSS 59 P1H.0/A8/CC6POS0/EX0IN 58 P1L.7/A7/CTRAP 57 P1L.6/A6/COUT63 56 VSS 55 XTAL1 54 XTAL2 53 VDD 52 P1L.5/A5/COUT62 51 P1L.4/A4/CC62 50 P1L.3/A3/COUT61 49 P1L.2/A2/CC61 48 P1L.1/A1/COUT60 47 P1L.0/A0/CC60 46 P0H.7/AD15 45 P0H.6/AD14 44 P0H.5/AD13 43 P0H.4/AD12 42 P0H.3/AD11 41 VSS VDD 21 P4.3/A19/CS0 22 /P4.5/A20 23 /P4.6/A21 24 RD 25 WR/WRL 26 ALE 27 Vpp/EA 28 P0L.0/AD0 29 P0L.1/AD1 30 P0L.2/AD2 31 P0L.3/AD3 32 P0L.4/AD4 33 P0L.5/AD5 34 P0L.6/AD6 35 P0L.7/AD7 36 P0H.0/AD8 37 P0H.1/AD9 38 P0H.2/AD10 39 VDD 40 MCP04870 Figure 2 * The marked pins of Port 4 and Port 8 can have CAN interface lines assigned to them. Table 2 on the pages below lists the possible assignments. The marked input signals are available only in devices with a full-function CAPCOM6. They are not available in devices with a reduced-function CAPCOM6. Data Sheet V2.0, 2001-05 C164CI/SI C164CL/SL Table 2 Pin Definitions and Functions Symbol Pin No. Input Function Outp. P5.0 76 P5.1 77 P5.2 78 P5.3 79 P5.4 2

PDF Datasheet Preview

Data Sheet, V2.0, May 2001

C164CI/SI C164CL/SL
16-Bit Single-Chip Microcontroller

Microcontrollers

Never stop thinking.

Edition 2001-05

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany

Infineon Technologies AG

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide.

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Data Sheet, V2.0, May 2001

C164CI/SI C164CL/SL
16-Bit Single-Chip Microcontroller

Microcontrollers

Never stop thinking.

C164CI
2001-05

V2.0

Previous Version:
1999-08
1998-02

Advance Information

Converted to Infineon layout

Operating frequency up to 25 MHz
1 et al. References to Flash removed

Timer Unit with three timers
1, 12, 73 On-chip XRAM described

Derivative table updated

Supply voltage is 5 V

Functionality of reduced CAPCOM6 corrected

Timer description improved
29, 30

Sections “Oscillator Watchdog” and “Power Management” added

POCON reset values adjusted
41 to 73 Parameter section reworked
1 These changes refer to the last two versions. Version 1998-02 covers OTP and ROM derivatives, while version 1999-08 ist the most recent one.
Ordering Information The ordering code for Infineon microcontrollers provides an exact reference to the required product. This ordering code identifies
• the derivative itself, i.e. its function set, the temperature range, and the supply voltage
• the package and the type of delivery. For the available ordering codes for the C164CI please refer to the “Product Catalog Microcontrollers”, which summarizes all available microcontroller variants. Note The ordering codes for Mask-ROM versions are defined for each product after
verification of the respective ROM code.

Introduction The C164CI derivatives of the Infineon C166 Family of full featured single-chip CMOS microcontrollers are especially suited for cost sensitive applications. They combine high CPU performance up to million instructions per second with high peripheral functionality and enhanced IO-capabilities. They also provide clock generation via PLL and various on-chip memory modules such as program ROM or OTP, internal RAM, and extension RAM.

VAREF VAGND VDD VSS

XTAL1 XTAL2 RSTIN RSTOUT

NMI EA

ALE RD WR/WRL

C164CI

Figure 1 Logic Symbol

Data Sheet

Port 0 16 Bit Port 1 16 Bit Port 3 9 Bit Port 4 6 Bit Port 8 4 Bit Port 5 8 Bit

MCL04869

V2.0, 2001-05

Pin Configuration top view

C164CI/SI C164CL/SL
80 VAGND 79 P5.3/AN3 78 P5.2/AN2 77 P5.1/AN1 76 P5.0/AN0 75 P8.3/CC19IO/* 74 P8.2/CC18IO/* 73 P8.1/CC17IO/* 72 P8.0/CC16IO/* 71 NMI 70 RSTOUT 69 RSTIN 68 P1H.7/A15/CC27IO 67 P1H.6/A14/CC26IO 66 P1H.5/A13/CC25IO 65 P1H.4/A12/CC24IO 64 P1H.3/A11/EXIN/T7IN 63 P1H.2/A10/CC6POS2/EX2IN 62 P1H.1/A9/CC6POS1/EX1IN 61 VDD

VAREF 1 P5.4/AN4/T2EUD 2 P5.5/AN5/T4EUD 3

P5.6/AN6/T2IN 4 P5.7/AN7/T4IN 5

VSS 6 VDD 7 P3.4/T3EUD 8 P3.6/T3IN 9 P3.8/MRST 10 P3.9/MTSR 11 P3.10/TxD0 12 P3.11/RxD0 13 P3.12/BHE/WRH 14 P3.13/SCLK 15 P3.15/CLKOUT/FOUT 16 P4.0/A16/CS3 17 P4.1/A17/CS2 18 P4.2/A18/CS1 19 VSS 20

C164CI
60 VSS 59 P1H.0/A8/CC6POS0/EX0IN 58 P1L.7/A7/CTRAP 57 P1L.6/A6/COUT63 56 VSS 55 XTAL1 54 XTAL2 53 VDD 52 P1L.5/A5/COUT62 51 P1L.4/A4/CC62 50 P1L.3/A3/COUT61 49 P1L.2/A2/CC61 48 P1L.1/A1/COUT60 47 P1L.0/A0/CC60 46 P0H.7/AD15 45 P0H.6/AD14 44 P0H.5/AD13 43 P0H.4/AD12 42 P0H.3/AD11 41 VSS

VDD 21 P4.3/A19/CS0 22
*/P4.5/A20 23 */P4.6/A21 24

RD 25 WR/WRL 26

ALE 27 Vpp/EA 28 P0L.0/AD0 29 P0L.1/AD1 30 P0L.2/AD2 31 P0L.3/AD3 32 P0L.4/AD4 33 P0L.5/AD5 34 P0L.6/AD6 35 P0L.7/AD7 36 P0H.0/AD8 37 P0H.1/AD9 38 P0H.2/AD10 39

VDD 40

MCP04870

Figure 2
* The marked pins of Port 4 and Port 8 can have CAN interface lines assigned to them. Table 2 on the pages below lists the possible assignments. The marked input signals are available only in devices with a full-function CAPCOM6. They are not available in devices with a reduced-function CAPCOM6.

Data Sheet

V2.0, 2001-05

C164CI/SI C164CL/SL

Table 2

Pin Definitions and Functions

Symbol Pin No.

Input Function Outp.

P5.0 76

P5.1 77

P5.2 78

P5.3 79

P5.4 2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived C164CI8EMDBKXUMA1 Datasheet file may be downloaded here without warranties.

Datasheet ID: C164CI8EMDBKXUMA1 637975