LOPL-E001M

LOPL-E001M Datasheet


The LOPL LiteOn Power LED Emitter I is a 1W power LED package which is a point light source with more energy efficient than incandescent and halogen lamps. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies.

Part Datasheet
LOPL-E001M LOPL-E001M LOPL-E001M (pdf)
PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

The LOPL LiteOn Power LED Emitter I is a 1W power LED package which is a point light source with more energy efficient than incandescent and halogen lamps. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies.
l High power LED light source l Long life, up to 100k hours l Instant light less than 100 ns l Low voltage DC operated l Low thermal resistance l RoHS Compliant l Lead free reflow solder compatible
l Portable lights l Traffic signaling l Backlighting l Interior & exterior automotive lighting l Decorative and landscape lighting l Medical illumination

Outline Dimensions

Notes All dimensions are in millimeters. Tolerance is mm unless otherwise noted.

Part No. LOPL-E001M DATA SHEET

BNC-OD-C131/A4

Page 1 of 12

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Rating and Characteristics

Absolute Maximum Ratings at Ta=25°C

Parameter

Rating

Unit

Junction Temperature

Thermal Resistance, Junction-Case

Rth, J-C
°C/W

Operating Temperature Range

Topr
-40 - 80

Storage Temperature Range

Tstg
-40 - 120

Soldering Condition 1, 2

Tsol
260°C For 5 Seconds

Notes

Proper current derating must be observed to maintain junction temperature below the maximum.

For more information, consult the LOPL Emitters application notes, available upon request.

Measured at leads, during lead soldering and heat pad attach, body temperature must not exceed
150°C. LOPL Emitters can be soldered by general IR reflow, or select heating the leads by hot bar
reflow or hand soldering.

Part No. LOPL-E001M DATA SHEET

BNC-OD-C131/A4

Page 2 of 12

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
More datasheets: DPD.99.010.5K | BRD.3K.170.800EN | MV5300MP2 | MV5000MP2 | MR5410MP2 | MV5400MP2 | MDM-15PBSM7 | DAMA26PF0 | BGF 100 E6327 | LTS-4802BJS-H1


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LOPL-E001M Datasheet file may be downloaded here without warranties.

Datasheet ID: LOPL-E001M 645832