BGF 100 E6327

BGF 100 E6327 Datasheet


BGF100

Part Datasheet
BGF 100 E6327 BGF 100 E6327 BGF 100 E6327 (pdf)
PDF Datasheet Preview
BGF100

Microphone Filter and ESD Protection Evaluation Kit

RF & Protection Devices

Edition 2007-02-21

Published by Infineon Technologies AG 81726 München, Germany

Infineon Technologies AG All Rights Reserved.

LEGAL DISCLAIMER

THE INFORMATION GIVEN IN THIS APPLICATION NOTE IS GIVEN AS A HINT FOR THE IMPLEMENTATION OF THE INFINEON TECHNOLOGIES COMPONENT ONLY AND SHALL NOT BE REGARDED AS ANY DESCRIPTION OR WARRANTY OF A CERTAIN FUNCTIONALITY, CONDITION OR QUALITY OF THE INFINEON TECHNOLOGIES COMPONENT. THE RECIPIENT OF THIS APPLICATION NOTE MUST VERIFY ANY FUNCTION DESCRIBED HEREIN IN THE REAL APPLICATION. INFINEON TECHNOLOGIES HEREBY DISCLAIMS ANY AND ALL WARRANTIES AND LIABILITIES OF ANY KIND INCLUDING WITHOUT LIMITATION WARRANTIES OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY WITH RESPECT TO ANY AND ALL INFORMATION GIVEN IN THIS APPLICATION NOTE.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Microphone Filter and ESD Protection Evaluation Kit

Titel change

BGF100 Evaluation Kit

Evaluation Kit Description

BGF100 Evaluation Kit

BGF100 Microphone Filter and ESD Protection Evaluation Kit

BGF100 Microphone Filter and ESD Protection Evaluation Kit

The BGF100 is a microphone filter with low pass characteristic offering a very high stop band attenuation up to 6 GHz. It also provides an ESD protection at the input pins up to 15 kV contact discharge. The wafer level package is a green lead free package with a size of only mm x mm and a total height of mm.

A4 A2

Figure 1 Block Diagram

B3 A3 B2

C3 A3 B2

C3 A3

B2 C2
bgf100_block.vsd

The evaluation kit for the BGF100 microphone filter and ESD protection IC consists of two printed circuit boards:
• DC board
• RF board

DC Board

Figure 2 DC evaluation board

Evaluation Kit Description
bgf100_dc_bb.vsd

BGF100 Evaluation Kit

BGF100 Microphone Filter and ESD Protection Evaluation Kit

Figure 2 shows the DC evaluation board used in this evaluation kit. This PCB was designed to be mounted with two BGF100. On the left hand side the HiPAC IC is soldered to the board while the right hand side of the board was left open to show the footprint required for BGF100. The size of the board is 15 mm by 38 mm. The pitch size of the pads is mm. This board was designed to perform pin-to-pin DC tests, like measuring the values of the integrated resistors, as well as checking the ESD performance of the IC. It can also be used for qualification purposes.

RF Board

Figure 3 Bare RF Board
bgf100_rf_bb.vsd

Figure 4 Populated RF Board Evaluation Kit Description
bgf100_rf_pb.vsd
More datasheets: FGL.3K.93B.CLMT91Z | FGL.3K.93B.CLMT76Z | DPD.99.010.5K | BRD.3K.170.800EN | MV5300MP2 | MV5000MP2 | MR5410MP2 | MV5400MP2 | MDM-15PBSM7 | DAMA26PF0


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BGF100E6327 Datasheet file may be downloaded here without warranties.

Datasheet ID: BGF100E6327 637713