HSDL-3021-021

HSDL-3021-021 Datasheet

HSDL-3021 Data Compliant Low Power Mbit/s with Remote Control Infrared Transceiver

Part	Datasheet
HSDL-3021-021	HSDL-3021-021 (pdf)

PDF Datasheet Preview
HSDL-3021 Data Compliant Low Power Mbit/s with Remote Control Infrared Transceiver Data Sheet The HSDL-3021 is a new generation low profile high speed enhanced infrared IR transceiver module that provides the capability of 1 interface between logic and IR signals for through-air, serial, half- duplex IR data link, and 2 IR remote control transmission for universal remote control applications. The HSDL3021 can be used for IrDA as well as remote control application without the need of any additional external components for multiplexing. The HSDL-3021 is fully compliant to Physical Layer specification version low power from kbit/s to Mbit/s FIR and IEC825 Class 1 eye safety standards. The HSDL-3021 can be shut down completely to achieve very low power consumption. In the shut-down mode, the PIN diode will be inactive and thus produce very little photocurrent even under very bright ambient light. It is also designed to interface to input/output logic circuits as low as V. These features are ideal for battery operated mobile devices such as PDAs and mobile phones that require low power consumption. • Mobile data communication and universal remote control Mobile phones PDAs Webpads General Features • Operating temperature from -25°C ~ 85°C Critical parameters are guaranteed over temperature and supply voltage • VCC supply to volts • Miniature package Height mm Width mm Depth mm • Integrated remote control LED driver • Input/output interface voltage of V • Integrated EMI shield • LED stuck-high protection • Designed to accommodate light loss with cosmetic windows • IEC 825-Class 1 eye safe • Interface to various super I/O and controller devices • Lead free package Features • Fully compliant to IrDA Physical Layer Low Power Specifications from kbit/s to Mb/s Link distance up to 50 cm typically • Complete shutdown for TxD_IrDA, RxD_IrDA and PIN diode • Low power consumption Low shutdown current Remote Control Features • Wide angle and high radiant intensity • Spectrally suited to remote control function at 890 nm typically • Typical link distance up to 8 meters on-axis SHIELD VLED CX3 CX4 IOVCC CX5 LEDA 1 IOVCC 2 TxD_IR 3 RxD 4 R1 VCC VCC 6 TxD_RC 7 GND 8 LED DRIVER Rx PULSE SHAPER Figure HSDL-3021 block diagram. 87654321 Figure Pinout. Application Support Information The Application Engineering Group is available to assist you with the application design associated with HSDL-3021 infrared transceiver module. You can contact them through your local sales representatives for additional details. Order Information Part Number HSDL-3021-021

PDF Datasheet Preview

HSDL-3021 Data Compliant Low Power Mbit/s with Remote Control Infrared Transceiver

Data Sheet

The HSDL-3021 is a new generation low profile high speed enhanced infrared IR transceiver module that provides the capability of 1 interface between logic and IR signals for through-air, serial, half- duplex IR data link, and 2 IR remote control transmission for universal remote control applications. The HSDL3021 can be used for IrDA as well as remote control application without the need of any additional external components for multiplexing.

The HSDL-3021 is fully compliant to Physical Layer specification version low power from kbit/s to Mbit/s FIR and IEC825 Class 1 eye safety standards.

The HSDL-3021 can be shut down completely to achieve very low power consumption. In the shut-down mode, the PIN diode will be inactive and thus produce very little photocurrent even under very bright ambient light. It is also designed to interface to input/output logic circuits as low as V. These features are ideal for battery operated mobile devices such as PDAs and mobile phones that require low power consumption.
• Mobile data communication and universal remote control Mobile phones PDAs Webpads

General Features
• Operating temperature from -25°C ~ 85°C

Critical parameters are guaranteed over temperature and supply voltage
• VCC supply to volts
• Miniature package

Height mm Width mm Depth mm
• Integrated remote control LED driver
• Input/output interface voltage of V
• Integrated EMI shield
• LED stuck-high protection
• Designed to accommodate light loss with cosmetic windows
• IEC 825-Class 1 eye safe
• Interface to various super I/O and controller devices
• Lead free package Features
• Fully compliant to IrDA Physical Layer Low Power

Specifications from kbit/s to Mb/s Link distance up to 50 cm typically
• Complete shutdown for TxD_IrDA, RxD_IrDA and PIN diode
• Low power consumption Low shutdown current

Remote Control Features
• Wide angle and high radiant intensity
• Spectrally suited to remote control function at 890 nm typically
• Typical link distance up to 8 meters on-axis

SHIELD

VLED CX3 CX4

IOVCC CX5

LEDA 1 IOVCC 2 TxD_IR 3

RxD 4

R1 VCC

VCC 6

TxD_RC 7

GND 8

LED DRIVER

Rx PULSE SHAPER

Figure HSDL-3021 block diagram.
87654321

Figure Pinout.

Application Support Information

The Application Engineering Group is available to assist you with the application design associated with HSDL-3021 infrared transceiver module. You can contact them through your local sales representatives for additional details.

Order Information Part Number HSDL-3021-021

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HSDL-3021-021 Datasheet file may be downloaded here without warranties.

Datasheet ID: HSDL-3021-021 645810