RXD-315-KH

RXD-315-KH Datasheet

RXD-315-KH RXD-418-KH RXD-433-KH

Part	Datasheet
RXD-315-KH	RXD-315-KH (pdf)

Related Parts	Information
RXD-418-KH	RXD-418-KH
RXD-433-KH	RXD-433-KH

PDF Datasheet Preview
RXD-315-KH RXD-418-KH RXD-433-KH WIRELESS MADE SIMPLE KH SERIES RECEIVER/DECODER DATA GUIDE The KH Series is ideally suited for volume use in OEM applications such as remote control/command and keyless entry. It combines an RF receiver with an on-board decoder. When paired with a matching KH Series transmitter/encoder module, a highly reliable wireless link is formed, capable of transferring the status of 8 parallel inputs along for distances in excess of 300 feet. Ten tri-state address lines provide 310 different addresses for security and uniqueness. Housed in a compact SMD package, the KH module utilizes a highly optimized SAW architecture to achieve an unmatched blend of performance, size, efficiency, and cost. No external RF components, except an antenna, are required, making design integration straightforward. RF RECEIVER/DECODER RXD-418-KH LOT 1000 Figure 1 Package Dimensions - Low cost - On-board decoder - 8 parallel binary outputs - 310 addresses for security and uniqueness - No external RF components required - Ultra-low power consumption - Compact SMD package - Stable SAW-based architecture - Received data output - Transmission validation - No production tuning APPLICATIONS INCLUDE - Remote Control/Command - Keyless Entry - Garage/Gate Openers - Lighting Control - Call Systems - Home/Industrial Automation - Fire/Security Alarms - Remote Status Monitoring - Wire Elimination ORDERING INFORMATION PART # EVAL-*-KH Basic Evaluation Kit TXE-315-KH TXE-418-KH Transmitter/Encoder 315 MHz Transmitter/Encoder 418 MHz TXE-433-KH Transmitter/Encoder 433 MHz RXD-315-KH Receiver/Decoder 315 MHz RXD-418-KH Receiver/Decoder 418 MHz RXD-433-KH Receiver/Decoder 433 MHz * Insert Frequency ELECTRICAL SPECIFICATIONS Parameter POWER SUPPLY Operating Voltage With Dropping Resistor Supply Current Power-down Current RECEIVER SECTION Receive Frequency RXD-315-KH RXD-418-KH RXD-433-KH Center Frequency Accuracy IF Noise Bandwidth Data Rate Data Output Logic Low Logic High Receiver Sensitivity ANTENNA PORT RF Input Impedance TIMING Receiver Turn-On Time: Via Vcc DECODER TX Data Length Average Data Duty Cycle Decoder Oscillator Output Drive Current ENVIRONMENTAL Operating Temperature Range Designation Min. Typical Max. ICC IPDN N3DB VOL VOH VCC-0.3 315 418 -102 +75 5,000 VCC -106 FENC 26 bits 3x Units Notes mSec

PDF Datasheet Preview

RXD-315-KH RXD-418-KH RXD-433-KH

WIRELESS MADE SIMPLE

KH SERIES RECEIVER/DECODER DATA GUIDE

The KH Series is ideally suited for volume use in OEM applications such as remote control/command and keyless entry. It combines an RF receiver with an on-board decoder. When paired with a matching KH Series transmitter/encoder module, a highly reliable wireless link is formed, capable of transferring the status of 8 parallel inputs along for distances in excess of 300 feet. Ten tri-state address lines provide 310 different addresses for security and uniqueness. Housed in a compact SMD package, the KH module utilizes a highly optimized SAW architecture to achieve an unmatched blend of performance, size, efficiency, and cost. No external RF components, except an antenna, are required, making design integration straightforward.

RF RECEIVER/DECODER RXD-418-KH

LOT 1000

Figure 1 Package Dimensions
- Low cost - On-board decoder - 8 parallel binary outputs - 310 addresses for security and
uniqueness - No external RF components
required
- Ultra-low power consumption - Compact SMD package - Stable SAW-based architecture - Received data output - Transmission validation - No production tuning

APPLICATIONS INCLUDE
- Remote Control/Command - Keyless Entry - Garage/Gate Openers - Lighting Control - Call Systems - Home/Industrial Automation - Fire/Security Alarms - Remote Status Monitoring - Wire Elimination
ORDERING INFORMATION

PART #

EVAL-***-KH

Basic Evaluation Kit

TXE-315-KH TXE-418-KH

Transmitter/Encoder 315 MHz Transmitter/Encoder 418 MHz

TXE-433-KH

Transmitter/Encoder 433 MHz

RXD-315-KH

Receiver/Decoder 315 MHz

RXD-418-KH

Receiver/Decoder 418 MHz

RXD-433-KH

Receiver/Decoder 433 MHz
*** Insert Frequency

ELECTRICAL SPECIFICATIONS

Parameter

POWER SUPPLY Operating Voltage

With Dropping Resistor Supply Current Power-down Current

RECEIVER SECTION Receive Frequency

RXD-315-KH RXD-418-KH RXD-433-KH Center Frequency Accuracy IF Noise Bandwidth Data Rate Data Output Logic Low Logic High

Receiver Sensitivity ANTENNA PORT

RF Input Impedance

TIMING Receiver Turn-On Time:

Via Vcc DECODER TX Data Length Average Data Duty Cycle Decoder Oscillator Output Drive Current ENVIRONMENTAL

Operating Temperature Range

Designation Min.

Typical

Max.

ICC IPDN

N3DB

VOL VOH

VCC-0.3
315 418
-102
+75 5,000

VCC -106

FENC
26 bits 3x

Units Notes
mSec

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived RXD-315-KH Datasheet file may be downloaded here without warranties.

Datasheet ID: RXD-315-KH 645787