CSI-RGFB-200-UFFR-B

CSI-RGFB-200-UFFR-B Datasheet

PART NUMBER CSI-RGFB-100-UFFR CSI-RGFB-200-UFFR CSI-RGFB-300-UFFR CSI-RGFB-100-UFFR-B CSI-RGFB-200-UFFR-B CSI-RGFB-300-UFFR-B

Part	Datasheet
CSI-RGFB-200-UFFR-B	CSI-RGFB-200-UFFR-B (pdf)

Related Parts	Information
CSI-RGFB-300-UFFR	CSI-RGFB-300-UFFR
CSI-RGFB-200-UFFR	CSI-RGFB-200-UFFR
CSI-RGFB-100-UFFR	CSI-RGFB-100-UFFR
CSI-RGFB-100-UFFR-B	CSI-RGFB-100-UFFR-B
CSI-RGFB-300-UFFR-B	CSI-RGFB-300-UFFR-B

PDF Datasheet Preview
ITEM A DESCRIPTION U.FL PLUG MATERIAL BRASS FINISH GOLD RP-SMA FEM. B BULKHEAD MOUNT BRASS CONNECTOR GOLD CABLE NUT WASHER HEAT SHRINK TUBING 1.13mm COAXIAL BRASS POLYOLEFIN GRAY GOLD BLACK RECOMMENDED MOUNTING HOLE SEE PART NUMBER TABLE APPV A INITIAL RELEASE OF LINX INTERNAL DRAWING 14-MAY-15 SAH UPDATED NOTES NUMBERING UPDATED NOTE 5; ADDED FLAG NOTE 7 AND VIEW TO ILLUSTRATE CONNECTOR ORIENTATION ADDED DIMESIONS; UPDATED DESCRIPTION TABLE 1-SEP-15 SAH C UPDATED TO ADD DIMENSIONS TO NUT AND WASHER 13-JUL-16 SAH UPDATED NOTES TO ADD TORQUE SPECIFICATIONS AND D PACKAGING INSTRUCTIONS ADDED MOUNTING HOLE 27-OCT-17 CLL ADDED "-B" PART NUMBERS UPDATED DIMENSIONS NOTES UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES [mm]. DIMENSIONS APPLY AFTER FINISHING. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE,USE MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE SOURCED MATERIALS. MINIMUM FREQUENCY RANGE DC TO 3GHz. CABLE ASSEMBLY SPECIFICATIONS; - CHARACTERISTIC IMPEDANCE 50Ω ± 3Ω - INSERTION LOSS 100mm - IN GHz TYP. 200mm - IN GHz TYP. 300mm - IN GHz TYP. CONNECTORS TO BE APPLIED IN ACCORDANCE WITH CONNECTOR SUPPLIER RECOMMENDED PROCEDURE TORQUE SPECIFICATIONS - BULKHEAD MOUNTING NUT TORQUE 7 TO 10 in-lbs. - RECOMMENDED MATING TORQUE 7 TO 10 in-lbs.

PDF Datasheet Preview

ITEM A

DESCRIPTION U.FL PLUG

MATERIAL BRASS

FINISH GOLD

RP-SMA FEM. B BULKHEAD MOUNT BRASS

CONNECTOR

GOLD

CABLE

NUT WASHER HEAT SHRINK TUBING
1.13mm COAXIAL BRASS

POLYOLEFIN

GRAY

GOLD BLACK

RECOMMENDED MOUNTING HOLE

SEE PART NUMBER TABLE

APPV

A INITIAL RELEASE OF LINX INTERNAL DRAWING
14-MAY-15 SAH

UPDATED NOTES NUMBERING UPDATED NOTE 5;

ADDED FLAG NOTE 7 AND VIEW TO ILLUSTRATE CONNECTOR ORIENTATION ADDED DIMESIONS;

UPDATED DESCRIPTION TABLE
1-SEP-15 SAH

C UPDATED TO ADD DIMENSIONS TO NUT AND WASHER
13-JUL-16 SAH

UPDATED NOTES TO ADD TORQUE SPECIFICATIONS AND D PACKAGING INSTRUCTIONS ADDED MOUNTING HOLE 27-OCT-17 CLL

ADDED "-B" PART NUMBERS UPDATED DIMENSIONS

NOTES UNLESS OTHERWISE SPECIFIED

ALL DIMENSIONS ARE IN INCHES [mm].

DIMENSIONS APPLY AFTER FINISHING.

MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE,USE

MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY

HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE

SOURCED MATERIALS.

MINIMUM FREQUENCY RANGE DC TO 3GHz.

CABLE ASSEMBLY SPECIFICATIONS;
- CHARACTERISTIC IMPEDANCE 50Ω ± 3Ω
- INSERTION LOSS 100mm - IN GHz TYP.
200mm - IN GHz TYP.
300mm - IN GHz TYP.

CONNECTORS TO BE APPLIED IN ACCORDANCE WITH CONNECTOR SUPPLIER RECOMMENDED PROCEDURE

TORQUE SPECIFICATIONS - BULKHEAD MOUNTING NUT TORQUE 7 TO 10 in-lbs. - RECOMMENDED MATING TORQUE 7 TO 10 in-lbs.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CSI-RGFB-200-UFFR-B Datasheet file may be downloaded here without warranties.

Datasheet ID: CSI-RGFB-200-UFFR-B 645764