BRR.1S.200.PZVG

BRR.1S.200.PZVG Datasheet

BRR Dust Cap Product Changes Consolidated Version

Part	Datasheet
BRR.1S.200.PZVG	BRR.1S.200.PZVG (pdf)

Related Parts	Information
BRR.2S.200.PZVG	BRR.2S.200.PZVG
BRR.3S.200.PZVG	BRR.3S.200.PZVG
BRR.0S.200.PZVG	BRR.0S.200.PZVG
BRR.1S.200.PZVN	BRR.1S.200.PZVN
BRR.3S.200.PZSN	BRR.3S.200.PZSN
BRR.1S.200.PZSN	BRR.1S.200.PZSN
BRR.0S.200.PZSGY	BRR.0S.200.PZSGY
BRR.2S.200.PZSN	BRR.2S.200.PZSN

PDF Datasheet Preview
LEMO USA, Inc. 635 Park Court P.O. Box 2408 Rohnert Park, CA 94927-2408 Main Toll Free Fax Email 707 578-8811 800 444-5366 707 578-0869 Number By Date: #122B LEMO SA November 14, 2013 BRR Dust Cap Product Changes Consolidated Version Summary of Changes Detailed information below : 1 Plastic components made from PSU rather than POM announced in Product Update #122 on May 15, 2013 2 NEW in this announcement- Material of gasket made from FKM rather than MVQ Silicone see information in Item #1 Material Changes section below 3 NEW Thread locker recommendations announced in Product update #122A on October 28, 2013 4 New part numbers announced in Product update #122A although additional information has been added in Item #3 below 5 New colors available announced in Product update #122A 1 & 2 Material Changes: To improve the quality on the BRR dust cap products, LEMO has changed the dust cap materials from POM Polyoxymethylene to PSU Polysulfone for the plastic components, and MVQ Silicone to FKM for the gasket material. These material changes improve the adhesion of the gasket and seals the connector properly during unmating cycles. All series of the BRR dust cap products including 0S, 1S, 2S, 3S, and 3K are implemented with this material change. Product Update #122B BRR Dust Cap Product Changes Consolidation Page 1 of 3 11/12/13 3 Thread locker Recommendations With this PSU material change it is critical that the correct thread locker and thread sealants are used as listed below: A Thread lockers such as 242 or equivalent are not compatible with the PSU cap material B The following removable thread lockers or thread sealants are recommended for use on the receptacle threads: Removable Thread lockers • ND Industries VC6 LEMO USA part# VTVC-6 CLEAR • ThreeBond 1401 PTFE based Thread sealants reduced break-away torque • Thread Sealant with PTFE 80633 • w/PTFE 4 Old and New Part Numbers: Please note the new part numbers have a PZV_ suffix Series Old Part Number New Part Number 0S, 0B BRR.0S.200.PZS_ BRR.0S.200.PZV_ 1S,1B,1D 2S, 2B, 2C, 2G BRR.1S.200.PZS_ BRR.2S.200.PZS_ BRR.1S.200.PZV_ BRR.2S.200.PZV_ 3S, 3B BRR.3S.200.PZS_ BRR.3S.200.PZV_ 5 Color Options Replace the _ at the end of the part number above with the color code below: G=Gray N=Black B=White A=Blue

PDF Datasheet Preview

LEMO USA, Inc. 635 Park Court P.O. Box 2408 Rohnert Park, CA 94927-2408

Main Toll Free Fax Email
707 578-8811 800 444-5366 707 578-0869

Number By Date:
#122B LEMO SA November 14, 2013

BRR Dust Cap Product Changes Consolidated Version

Summary of Changes Detailed information below :
1 Plastic components made from PSU rather than POM announced in Product Update #122 on May 15, 2013
2 NEW in this announcement- Material of gasket made from FKM rather than MVQ Silicone see information in Item #1 Material Changes section below
3 NEW Thread locker recommendations announced in Product update #122A on October 28, 2013
4 New part numbers announced in Product update #122A although additional information has been added in Item #3 below
5 New colors available announced in Product update #122A
1 & 2 Material Changes:

To improve the quality on the BRR dust cap products, LEMO has changed the dust cap materials from POM Polyoxymethylene to PSU Polysulfone for the plastic components, and MVQ Silicone to FKM for the gasket material. These material changes improve the adhesion of the gasket and seals the connector properly during unmating cycles. All series of the BRR dust cap products including 0S, 1S, 2S, 3S, and 3K are implemented with this material change.

Product Update #122B BRR Dust Cap Product Changes Consolidation Page 1 of 3
11/12/13
3 Thread locker Recommendations

With this PSU material change it is critical that the correct thread locker and thread sealants are used as listed below:

A Thread lockers such as 242 or equivalent are not compatible with the PSU cap material

B The following removable thread lockers or thread sealants are recommended for use on the receptacle threads:

Removable Thread lockers
• ND Industries VC6 LEMO USA part# VTVC-6 CLEAR
• ThreeBond 1401

PTFE based Thread sealants reduced break-away torque
• Thread Sealant with PTFE 80633
• w/PTFE
4 Old and New Part Numbers:

Please note the new part numbers have a PZV_ suffix

Series

Old Part Number

New Part Number
0S, 0B

BRR.0S.200.PZS_

BRR.0S.200.PZV_
1S,1B,1D 2S, 2B, 2C, 2G

BRR.1S.200.PZS_ BRR.2S.200.PZS_

BRR.1S.200.PZV_ BRR.2S.200.PZV_
3S, 3B

BRR.3S.200.PZS_

BRR.3S.200.PZV_
5 Color Options

Replace the _ at the end of the part number above with the color code below:

G=Gray N=Black B=White A=Blue

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BRR.1S.200.PZVG Datasheet file may be downloaded here without warranties.

Datasheet ID: BRR.1S.200.PZVG 645550