RMB024-POE

RMB024-POE Datasheet

RMB024-POE RMB024-POE-SP

Part	Datasheet
RMB024-POE	RMB024-POE (pdf)

Related Parts	Information
RMB024-POE-SP	RMB024-POE-SP

PDF Datasheet Preview
RAMP Bridge Simple, Long-Range Wireless Ethernet Bridging Laird’s RAMP Bridge provides a simple, high-performance Wireless Ethernet cable replacement system that eliminates the frustration, cost, and complication of its competitors, all contained in a small, durable form factor. Say goodbye to enormous outdoor antennas that rely on directional precision and complicated alignment. Laird’s RAMP Bridge makes it easier than ever to achieve industrial-strength long-range Ethernet cable replacement in any environment. QUICK AND EASY, RIGHT OUT OF THE BOX RAMP Bridge starter packs contain two RAMP Bridge units configured as server and client. This allows you to plug into your network and get started quickly. Individual units are also for sale which may be set as either a server or a client with the on-board setup wizard. The RAMP Bridge setup wizard, accessible over your web browser, makes setting up, testing, backing up, and updating every RAMP Bridge device as simple as following a few prompts. SMALL, RUGGED, AND ALL THE PERFORMANCE, ENTIRELY WEATHERPROOF NONE OF THE HASSLE In addition to the high-gain omnidirectional antenna, the RAMP Bridge is encased in a sturdy IP67 waterproof enclosure. This allows the RAMP Bridge to be reliably deployed without the cost or complications of external, directional antennas. The integrated antenna is complemented by an internal power amplifier to deliver range usually only available with an external antenna. The RAMP Bridge provides exceptional performance, connectivity, and range in an impressively small form factor. It achieves RF data rates up to 54Mbps at ranges as high as half a mile, and a maximum range of miles. Don’t struggle with products that rely on huge directional antennas which must be carefully aligned and maintained to connect. The RAMP Bridge’s omnidirectional antenna means you’ll never have to carefully point antennas to achieve superior communications. This makes the RAMP Bridge the best and simplest solution for wireless deployment in all environments. • Point to point or point to multipoint bridging up to five clients • Omni-directional internal antenna no pointing necessary • RF Data rates up to 54Mbps • Browser-based configuration wizard, no need for external configuration software or drivers • Power Over Ethernet 802.3af • IP67-certified waterproof enclosure • FCC/IC Regulatory approvals Application Areas Digital signage LED signs, reader boards, outdoor menus Remote POS terminals for hospitality / retail Easy, robust networking in remote worksite locations USA Europe Asia: The details contained within this document are subject to change. Download the product specification from for the most current specification. RAMP Bridge Simple, Long-Range Wireless Ethernet Bridging CATEGORY Wireless Specifications Power Specifications Environmental Physical FEATURE Network architecture Frequency band Modulation Ethernet interface data rate Channels Security RF Data Rate Sensitivity Range line-of-sight Transmit power Input Voltage Power Consumption Power supply Temperature Ingress Protection Dimensions Weight Antenna Mounting Options Hardware Software Standard interface Configuration software The details contained within the document are subject to change. IMPLEMENTATION Server/client GHz DSSS 10/100Mbps 11 selectable 128 bit AES-CCMP Up to 54Mbps -92 dB min RF data rate Up to km 3.5miles Up to 4W EIRP 48V dc POE 7 Watts Power Over Ethernet 802.3af -40º to +70ºC IP-67 Dust Tight and Water Immersion up to 1m x 106 mm 14 x in. 798g 1.76lbs Integrated 5dBi Omni Directional Wall Mount Standard Pole Mount 38.1mm 1.5in to 114.3mm 4.5in optional RJ-45 Power Over Ethernet 802.3af Internal webserver for configuration Ordering Information RMB024-POE RMB024-POE-SP Single 2.4GHZ Power Over Ethernet Unit Starter pack Two 2.4GHZ Power Over Ethernet Units preconfigured in bridge mode CONN-DS-RAMP-BRIDGE_v1_0 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Version 12 Feb 15 Changes Approved By Initial C. Downey

PDF Datasheet Preview

RAMP Bridge

Simple, Long-Range Wireless Ethernet Bridging

Laird’s RAMP Bridge provides a simple, high-performance Wireless Ethernet cable replacement system that eliminates the frustration, cost, and complication of its competitors, all contained in a small, durable form factor. Say goodbye to enormous outdoor antennas that rely on directional precision and complicated alignment. Laird’s RAMP Bridge makes it easier than ever to achieve industrial-strength long-range Ethernet cable replacement in any environment.

QUICK AND EASY,

RIGHT OUT OF THE BOX

RAMP Bridge starter packs contain two RAMP Bridge units configured as server and client. This allows you to plug into your network and get started quickly. Individual units are also for sale which may be set as either a server or a client with the on-board setup wizard. The RAMP Bridge setup wizard, accessible over your web browser, makes setting up, testing, backing up, and updating every RAMP Bridge device as simple as following a few prompts.

SMALL, RUGGED, AND

ALL THE PERFORMANCE,

ENTIRELY WEATHERPROOF NONE OF THE HASSLE

In addition to the high-gain omnidirectional antenna, the RAMP Bridge is encased in a sturdy IP67 waterproof enclosure. This allows the RAMP Bridge to be reliably deployed without the cost or complications of external, directional antennas. The integrated antenna is complemented by an internal power amplifier to deliver range usually only available with an external antenna.

The RAMP Bridge provides exceptional performance, connectivity, and range in an impressively small form factor. It achieves RF data rates up to 54Mbps at ranges as high as half a mile, and a maximum range of miles. Don’t struggle with products that rely on huge directional antennas which must be carefully aligned and maintained to connect. The RAMP Bridge’s omnidirectional antenna means you’ll never have to carefully point antennas to achieve superior communications. This makes the RAMP Bridge the best and simplest solution for wireless deployment in all environments.
• Point to point or point to multipoint bridging up to five clients
• Omni-directional internal antenna no pointing necessary
• RF Data rates up to 54Mbps
• Browser-based configuration wizard, no need for
external configuration software or drivers
• Power Over Ethernet 802.3af
• IP67-certified waterproof enclosure
• FCC/IC Regulatory approvals

Application Areas

Digital signage LED signs, reader boards, outdoor
menus

Remote POS terminals for hospitality / retail

Easy, robust networking in remote worksite
locations

USA Europe Asia:

The details contained within this document are subject to change. Download the product specification from for the most current specification.

RAMP Bridge

Simple, Long-Range Wireless Ethernet Bridging

CATEGORY Wireless Specifications

Power Specifications

Environmental Physical

FEATURE Network architecture Frequency band Modulation Ethernet interface data rate Channels Security RF Data Rate Sensitivity Range line-of-sight Transmit power Input Voltage Power Consumption Power supply Temperature Ingress Protection Dimensions Weight Antenna Mounting Options

Hardware Software

Standard interface Configuration software

The details contained within the document are subject to change.

IMPLEMENTATION Server/client GHz DSSS 10/100Mbps 11 selectable 128 bit AES-CCMP Up to 54Mbps -92 dB min RF data rate Up to km 3.5miles Up to 4W EIRP 48V dc POE 7 Watts Power Over Ethernet 802.3af -40º to +70ºC IP-67 Dust Tight and Water Immersion up to 1m x 106 mm 14 x in. 798g 1.76lbs Integrated 5dBi Omni Directional Wall Mount Standard Pole Mount 38.1mm 1.5in to 114.3mm 4.5in optional RJ-45 Power Over Ethernet 802.3af Internal webserver for configuration
Ordering Information

RMB024-POE RMB024-POE-SP

Single 2.4GHZ Power Over Ethernet Unit Starter pack Two 2.4GHZ Power Over Ethernet Units preconfigured in bridge mode

CONN-DS-RAMP-BRIDGE_v1_0 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.

Version
12 Feb 15

Changes Approved By

Initial

C. Downey

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived RMB024-POE Datasheet file may be downloaded here without warranties.

Datasheet ID: RMB024-POE 645292