CN4790-1000-232-SP

CN4790-1000-232-SP Datasheet

CN4790-1000

Part	Datasheet
CN4790-1000-232-SP	CN4790-1000-232-SP (pdf)

Related Parts	Information
CN4490-1000-232-SP	CN4490-1000-232-SP
CN4490-1000-PRO-SP	CN4490-1000-PRO-SP
CN4490-1000-SP	CN4490-1000-SP
CN4790-1000	CN4790-1000
CN4490-1000	CN4490-1000

PDF Datasheet Preview
ConnexNet provides a complete hardware and software solution for adding wireless network connectivity to serial-based applications. The transceiver serves as a conduit between the user and multiple destination devices via a local network or the Internet. Controlling distant OEM networks is as easy as accessing the ‘Net. Unlike other industrial wireless Ethernet offerings, ConnexNet does not require a COM port director. All software controls communicate directly to the device, greatly improving system latency. And ConnexNet will support a wireless Ethernet-to-serial bridge to allow separate networks to talk with one another simultaneously. Each unit is small and easily portable for use in mobile or temporary settings as well as for fixed installations. FHSS modulation ensures reliable transmissions, while use of the 900MHz ISM band makes ConnexNet ready to use with no further certification. • Wireless LAN service supporting Ethernet interface. • Comprehensive networking protocols. • Equipped with a CPU, real-time OS , TCP/IP stack. • Provides control from virtually anywhere via the ‘Net. Industrial Control Remotely program your plant, factory, SCADA equipment. ConnexNet enables machine monitoring across countless miles without invasive wiring. Electronic Signs Reprogram sign and display equipment from anywhere in the world. ConnexNet lets you set up your signs anywhere, then change them at any time. Vending & Gaming Locate your equipment in the highest traffic areas tie devices together for complete network management. ConnexNet provides for both ease and opportunity. Point of Sale Process transactions remotely and securely via wireless links. ConnexNet lets you access Ethernet bridges without the high cost of cable. Building & Utility Monitor and manage building control systems such as power, lighting, security, HVAC, irrigation, etc. from anywhere in the world on your own PC. PARAMETER CN4790-1000 Architecture Network interface Standard Physical layer Mode Interface Connector Frequency band Modulation Serial interface data rate Output power Input power draw 12Vdc Power supply Electrical requirements Channels Security Sensitivity Range line-of-sight Temperature Humidity non-condensing Dimensions Weight Antenna connector Configuration software Peer-to-peer IEEE 10/100BaseT Half-duplex and full-duplex RJ-45 902-928 MHz FHSS FSK Up to Kbps 1000mW variable 7Vdc to 18Vdc 400mA TX, 40mA RX AC transformer via 6-foot cable 183 cm Line voltage 100-120V 240V outside U.S. Frequency 50-60 Hz Up to 32 1-byte system ID, DES -99 dB full RF data rate Up to 20 miles 32 km -40o to +80ºC 10% to 90% x in. 121 x 70 x 30 mm < 6 oz < 170 g Dipole RPSMA jack female * Optional, for Windows OS Higher-gain antenna options are available ask an AeroComm sales associate for more information. CN4490-1000 Server-client IEEE 10/100BaseT Half-duplex and full-duplex RJ-45 902-928 MHz FHSS FSK Up to Kbps 1000mW variable 7Vdc to 18Vdc 400mA TX, 40mA RX AC transformer via 6-foot cable 183 cm Line voltage 100-120V 240V outside U.S. Frequency 50-60 Hz Up to 32 1-byte system ID, DES -99 dB full RF data rate Up to 20 miles 32 km -40o to +80ºC 10% to 90% x in. 121 x 70 x 30 mm < 6 oz < 170 g Dipole RPSMA jack female Optional, for Windows OS Wireless Protocol RF PROTOCOL MODES a Communication Unicast one-to-one addressing Broadcast one-to-many addressing b Acknowledgement mode ACK API with hardware and/or software ACK indication c One-beacon mode d Dynamic radio data table Retains data from up to 12 transceivers INTERFACE PROTOCOL a On-the-fly transceiver configuration Destination address RF transmit power Co-located servers RF Channel Broadcast/addressed b Raw data or transmit/receive API c 9-bit serial interface mode d Long range mode Enables sensitivity control e Generic A/D, D/A generic I/Os f Variable baud rate g RF packet size, timeout control h Onboard temperature sensor i Handshaking C T S / RT S Full modem-mode available j In-range indicator k Error detection Onboard CRC Duplicate packet filtering l Data encryption standard DES Ethernet Protocol a Network Communication ARP, UDP, TCP, ICMP, TelNet, AutoIP, DHCP, SNMP

PDF Datasheet Preview

ConnexNet provides a complete hardware and software solution for adding wireless network connectivity to serial-based applications. The transceiver serves as a conduit between the user and multiple destination devices via a local network or the Internet. Controlling distant OEM networks is as easy as accessing the ‘Net.

Unlike other industrial wireless Ethernet offerings, ConnexNet does not require a COM port director. All software controls communicate directly to the device, greatly improving system latency. And ConnexNet will support a wireless Ethernet-to-serial bridge to allow separate networks to talk with one another simultaneously.

Each unit is small and easily portable for use in mobile or temporary settings as well as for fixed installations. FHSS modulation ensures reliable transmissions, while use of the 900MHz ISM band makes ConnexNet ready to use with no further certification.
• Wireless LAN service supporting Ethernet interface.
• Comprehensive networking protocols.
• Equipped with a CPU, real-time OS , TCP/IP stack.
• Provides control from virtually anywhere via the ‘Net.

Industrial Control Remotely program your plant, factory, SCADA equipment. ConnexNet enables machine monitoring across countless miles without invasive wiring.

Electronic Signs Reprogram sign and display equipment from anywhere in the world. ConnexNet lets you set up your signs anywhere, then change them at any time.

Vending & Gaming Locate your equipment in the highest traffic areas tie devices together for complete network management. ConnexNet provides for both ease and opportunity.

Point of Sale Process transactions remotely and securely via wireless links. ConnexNet lets you access Ethernet bridges without the high cost of cable.

Building & Utility Monitor and manage building control systems such as power, lighting, security, HVAC, irrigation, etc. from anywhere in the world on your own PC.

PARAMETER

CN4790-1000

Architecture Network interface

Standard Physical layer Mode Interface Connector Frequency band Modulation Serial interface data rate Output power Input power draw 12Vdc Power supply Electrical requirements

Channels Security Sensitivity Range line-of-sight Temperature Humidity non-condensing Dimensions Weight Antenna connector Configuration software

Peer-to-peer

IEEE 10/100BaseT Half-duplex and full-duplex RJ-45 902-928 MHz FHSS FSK Up to Kbps 1000mW variable 7Vdc to 18Vdc 400mA TX, 40mA RX AC transformer via 6-foot cable 183 cm Line voltage 100-120V 240V outside U.S. Frequency 50-60 Hz Up to 32 1-byte system ID, DES -99 dB full RF data rate Up to 20 miles 32 km -40o to +80ºC 10% to 90% x in. 121 x 70 x 30 mm < 6 oz < 170 g Dipole RPSMA jack female * Optional, for Windows OS
*Higher-gain antenna options are available ask an AeroComm sales associate for more information.

CN4490-1000

Server-client

IEEE 10/100BaseT Half-duplex and full-duplex RJ-45 902-928 MHz FHSS FSK Up to Kbps 1000mW variable 7Vdc to 18Vdc 400mA TX, 40mA RX AC transformer via 6-foot cable 183 cm Line voltage 100-120V 240V outside U.S. Frequency 50-60 Hz Up to 32 1-byte system ID, DES -99 dB full RF data rate Up to 20 miles 32 km -40o to +80ºC 10% to 90% x in. 121 x 70 x 30 mm < 6 oz < 170 g Dipole RPSMA jack female * Optional, for Windows OS

Wireless Protocol

RF PROTOCOL MODES
a Communication Unicast one-to-one addressing Broadcast one-to-many addressing
b Acknowledgement mode ACK API with hardware and/or software ACK indication
c One-beacon mode
d Dynamic radio data table Retains data from up to 12 transceivers

INTERFACE PROTOCOL
a On-the-fly transceiver configuration Destination address RF transmit power Co-located servers RF Channel Broadcast/addressed
b Raw data or transmit/receive API
c 9-bit serial interface mode
d Long range mode Enables sensitivity control
e Generic A/D, D/A generic I/Os
f Variable baud rate
g RF packet size, timeout control
h Onboard temperature sensor
i Handshaking C T S / RT S Full modem-mode available
j In-range indicator
k Error detection Onboard CRC Duplicate packet filtering
l Data encryption standard DES

Ethernet Protocol
a Network Communication ARP, UDP, TCP, ICMP, TelNet, AutoIP, DHCP, SNMP

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CN4790-1000-232-SP Datasheet file may be downloaded here without warranties.

Datasheet ID: CN4790-1000-232-SP 645138