2150-00006

2150-00006 Datasheet

Part	Datasheet
2150-00006	2150-00006 (pdf)

PDF Datasheet Preview
Antenna Specs NZH2400 The • Integral strip NZH is indicated dipole by the suffix ‘A’ • FCC, IC & on an ETSI AeroComm transceiver part number, example AC5124C-10A For use when no external antenna is allowed. AeroComm provides several versions of transceivers with an integral strip dipole antenna. The antenna element is part of the circuit board assembly. Benefits of an integral antenna include cost efficiency and elimination of external antennas that may break or are not suited for the application. However, consideration must be given to certain tradeoffs. 1 The range achieved by integral antennas are typically not as long as those achieved with external antennas such as a wave dipole rubber whip antenna. 2 The antenna performance can be effected by near field objects that attenuate the signal and further reduce range. The OEM must consider the mechanical mounting of the antenna, spacing the antenna away from mating circuit boards and objects such as batteries, etc. 3 The enclosure material that the transceiver is packaged within may attenuate the signal. 4 The radiation pattern of the integral strip dipole is directional the OEM must consider antenna orientation within the enclosure as well as the location of other transceivers. Nearson S151 0600-00012 5” lead, MMCX plug, 90o swivel 0600-00011 5” lead, MMCX plug, straight 0600-00010 RP-SMA connector, 90o swivel • 7 inches tall, rubber whip • 5 dBi gain • omni • FCC, IC & ETSI approved The S151 series are excellent antennas for mobile or fixed applications seeking short to medium range. They are small and light for portable devices yet provide the performance to meet most standard fixed locations. The S151 provides excellent antenna gain considering its size. The S151 are cost-effective for high volume applications. Image S181 • 4 inches tall, rubber whip • 2 dBi gain • omni • FCC, IC & ETSI The S181 antenna is similar in appearance to the S151, however, due to its shorter size, it provides less gain. Suitable for shorter range applications where the longer S151 is unacceptable. The S181 are cost-effective for high volume applications. They are available with self-contained mounting hardware for permanent attachment or with screw-on bases for removable attachment. High gain fiberglass omni SG102-2450 6 dBi 16 inches N Female only SG103-2450 dBi 22 inches N Female only SG104-2450 11 dBi 42 inches N Female only • Not agency Good for base stations approved High gain with an omni pattern • Require OEM Outdoor usage to make Omnidirectional coverage cable Ultra-violet resistant fiberglass radome terminated in Die casting mounting base with rugged structure design N-Male to connect to antenna, and RP-SMA plug

PDF Datasheet Preview

Antenna

Specs

NZH2400 The
• Integral strip

NZH is indicated
dipole
by the suffix ‘A’
• FCC, IC &
on an

ETSI

AeroComm
transceiver part
number,
example

AC5124C-10A

For use when no external antenna is allowed. AeroComm provides several versions of transceivers with an integral strip dipole antenna. The antenna element is part of the circuit board assembly. Benefits of an integral antenna include cost efficiency and elimination of external antennas that may break or are not suited for the application. However, consideration must be given to certain tradeoffs. 1 The range achieved by integral antennas are typically not as long as those achieved with external antennas such as a wave dipole rubber whip antenna. 2 The antenna performance can be effected by near field objects that attenuate the signal and further reduce range. The OEM must consider the mechanical mounting of the antenna, spacing the antenna away from mating circuit boards and objects such as batteries, etc. 3 The enclosure material that the transceiver is packaged within may attenuate the signal. 4 The radiation pattern of the integral strip dipole is directional the OEM must consider antenna orientation within the enclosure as well as the location of other transceivers.

Nearson S151 0600-00012 5” lead, MMCX plug, 90o swivel 0600-00011 5” lead, MMCX plug, straight 0600-00010 RP-SMA connector, 90o swivel
• 7 inches tall, rubber whip
• 5 dBi gain
• omni
• FCC, IC &

ETSI approved

The S151 series are excellent antennas for mobile or fixed applications seeking short to medium range. They are small and light for portable devices yet provide the performance to meet most standard fixed locations. The S151 provides excellent antenna gain considering its size. The S151 are cost-effective for high volume applications.

Image

S181
• 4 inches tall, rubber whip
• 2 dBi gain
• omni
• FCC, IC &

ETSI

The S181 antenna is similar in appearance to the S151, however, due to its shorter size, it provides less gain. Suitable for shorter range applications where the longer S151 is unacceptable. The S181 are cost-effective for high volume applications. They are available with self-contained mounting hardware for permanent attachment or with screw-on bases for removable attachment.

High gain fiberglass omni SG102-2450 6 dBi 16 inches N Female only

SG103-2450 dBi 22 inches N Female only

SG104-2450 11 dBi 42 inches N Female only
• Not agency Good for base stations
approved

High gain with an omni pattern
• Require OEM Outdoor usage
to make

Omnidirectional coverage
cable

Ultra-violet resistant fiberglass radome
terminated in Die casting mounting base with rugged structure design

N-Male to
connect to
antenna, and

RP-SMA plug

More datasheets: L2C3-2280109D06000 | L2C3-5090109E06000 | L2C3-5090107E06000 | MT16HTS51264HY-667A1 | MT16HTS25664HY-53EA1 | MT16HTS25664HY-667A1 | 45-1430-1 | 45-1430-5 | 45-1430-3 | 45-1430-2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2150-00006 Datasheet file may be downloaded here without warranties.

Datasheet ID: 2150-00006 644899