A15641-15
A15641-15 Datasheet
Any information furnished by Laird Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the end user since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability, or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request.damages of any kind. All Laird Technologies’ products are sold pursuant to the Laird Technologies’ terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. A15922-00 Rev C.,
| Part | Datasheet |
|---|---|
A15641-15 |
A15641-15 (pdf) |
| Related Parts | Information |
|---|---|
A15641-08 |
A15641-08 |
A15798-00 |
A15798-00 |
A15673-20 |
A15673-20 |
A15673-10 |
A15673-10 |
A15641-20 |
A15641-20 |
A15673-08 |
A15673-08 |
A15673-12 |
A15673-12 |
A15641-12 |
A15641-12 |
A15673-15 |
A15673-15 |
| PDF Datasheet Preview |
|---|
| Innovative Technology for a Connected World TflexTM 200T V0 Series Thermal Gap Filler THIN THERMALLY CONDUCTIVITY ELASTOMERIC INTERFACE MATERIAL Tflex 200T V0 is a specially formulated thin gap filler thermal interface material designed for thin interfaces that require a combination good thermal performance with great reliability. The elastomeric property of Tflex 200T V0 provides good thermal performance in a thin interface where reliability, shock and vibration considerations, are critical performance considerations in addition to low thermal resistance. Tflex 200T V0’s unique silicone and ceramic filler technology allows a combination of great reliability, good thermal performance, and easy handling. Tflex 200T V0 is slightly tacky, and requires no additional adhesive coating that inhibits thermal performance. Tflex 200T V0 is electrically insulating, stable from -40ºC thru 200ºC and meets UL 94V0 flame rating. • Thermal Conductivity W/mK • Compliant Elastomeric based thin interface material • Available in 0.008-inch 0.2mm , 0.010-inch 0.25mm , 0.012-inch 0.30mm , 0.015-inch 0.38mm , and 0.020-inch 0.51mm thicknesses • Slightly tacky for adhesion during assembly and transport • Competitive price for high volume applications • Available as individual custom parts, sheets, or custom parts converted on a roll • Memory Modules DDR2, DDR3, SDRAM, SRAM, RAM, NVRAM • LED solid state lighting • Power electronics global solutions local support TM Americas Europe Asia: Innovative Technology for a Connected World TflexTM 200T V0 Series Thermal Gap Filler Construction & Composition Color Thickness Thickness tolerance Specific Gravity Density Hardness Shore 00 Outgassing TML Post Cured Outgassing CVCM Post Cured UL Flammability Rating Temperature Range Thermal Conductivity Thermal Impedance 10 psi 69 KPa Thermal Expansion 30-150°C Volume Resistivity Dielectric Constant 1 MHz 8 MIL Ceramic filled silicone elastomer Light Grey 0.203mm ±0.038mm g/cc 94 V0 -45ºC to 200ºC W/mK 231.19ppm/°C 3.5x1010 ohm-cm 10 MIL Ceramic filled silicone elastomer Light Grey 0.254mm ±0.038mm g/cc 94 V0 -45ºC to 200ºC W/mK 231.19ppm/°C 3.5x1010 ohm-cm 15 MIL Ceramic filled silicone elastomer, reinforced Light Grey 0.381mm ±0.057mm g/cc 94 V0 -45ºC to 200ºC W/mK |
| More datasheets: 960013BFLFT | MC100ES8111FA | BTS4140NNT | MDM-25PH025L | A15641-08 | A15798-00 | A15673-20 | A15673-10 | A15641-20 | A15673-08 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A15641-15 Datasheet file may be downloaded here without warranties.