AA-060-24-23-00-10

AA-060-24-23-00-10 Datasheet

AA-060-24-23-00-10

Part	Datasheet
AA-060-24-23-00-10	AA-060-24-23-00-10 (pdf)

PDF Datasheet Preview
Description: Heat transfer, cold side Heat transfer, warm side Cascade: Code: A Air A Air - No Specification Ta=35°C, dT=0°C Cooling power [W] 060 58 W Calculated. Tolerance: TEA Voltage, nominal [VDC] TEM Voltage [VDC] TEM Current [A] 24 VDC Nominal 24 VDC Max 30 VDC Nominal A, Initial A Calculated. Tolerance: Fan s , cold side Fan s , warm side: 2 Nominal current A. Voltage 24 VDC L10 50,000 hrs. at 25°C. 3 Nominal current A. Voltage 24 VDC L10 50,000 hrs. at 25°C. IP55 Temperature controller, sensor: 0 None Temperature control settings, trim options: Temperature control position Additional controller information: 1 Connection board on coldside fan bracket. 0- Overheating thermostat: 75°C ±5°C Internally on hot side heat sink surface. Operating temperature: -10°C to +51°C at nominal voltage. TE-Module s temperature specification: Max. surface temperature 80°C. Enclosed: Packing: Individual cardboard box. This drawing is the property of Laird Technologies, Inc. Protected in accordance with prevailing law. General tolerances First angle Dimension units: SS-ISO 2768-1 v projection Metric [mm] Comment/Treating: Warm side of unit designed to comply with IP54. Hipot tested at 750VDC. Designed by Checked by Approved by Release date Project: A. Kim M. Nyman H. Höjer 2014-10-15 Standard Title: TE ASSEMBLY 24 VDC, AIR - AIR E-mail Web: Part nr: AA-060-24-23-00-10 04 - A3, 1 5 1 A B C D E F 170 q 92

PDF Datasheet Preview

Description:

Heat transfer, cold side Heat transfer, warm side Cascade:

Code:

A Air A Air - No

Specification Ta=35°C, dT=0°C

Cooling power [W]
060 58 W Calculated. Tolerance:

TEA Voltage, nominal [VDC] TEM Voltage [VDC] TEM Current [A]
24 VDC Nominal 24 VDC Max 30 VDC Nominal A, Initial A Calculated. Tolerance:

Fan s , cold side Fan s , warm side:
2 Nominal current A. Voltage 24 VDC L10 50,000 hrs. at 25°C. 3 Nominal current A. Voltage 24 VDC L10 50,000 hrs. at 25°C. IP55

Temperature controller, sensor:
0 None

Temperature control settings, trim options:

Temperature control position Additional controller information:
1 Connection board on coldside fan bracket. 0-

Overheating thermostat:
75°C ±5°C Internally on hot side heat sink surface.

Operating temperature:
-10°C to +51°C at nominal voltage.

TE-Module s temperature specification:

Max. surface temperature 80°C.

Enclosed:

Packing:

Individual cardboard box.

This drawing is the property of Laird Technologies, Inc. Protected in accordance with prevailing law.

General tolerances First angle Dimension units:

SS-ISO 2768-1 v projection Metric [mm]

Comment/Treating:

Warm side of unit designed to comply with IP54. Hipot tested at 750VDC.

Designed by Checked by Approved by Release date Project:

A. Kim M. Nyman H. Höjer 2014-10-15

Standard

Title:

TE ASSEMBLY 24 VDC, AIR - AIR

E-mail Web:

Part nr:

AA-060-24-23-00-10
04 - A3, 1 5
1 A B C D E F
170 q 92

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AA-060-24-23-00-10 Datasheet file may be downloaded here without warranties.

Datasheet ID: AA-060-24-23-00-10 645068