APHFT1612PBASURKVGAC

APHFT1612PBASURKVGAC Datasheet

Part Number APHFT1612PBASURKVGAC Blue Hyper Red Green

Part	Datasheet
APHFT1612PBASURKVGAC	APHFT1612PBASURKVGAC (pdf)

PDF Datasheet Preview
PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES z 1.6x1.26mm SMT LED, 0.52mm THICKNESS. z LOW POWER CONSUMPTION. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL z RoHS COMPLIANT. Package Dimensions 1.6X1.26mm SMD CHIP LED LAMP Part Number APHFT1612PBASURKVGAC Blue Hyper Red Green The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Notes All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Specifications are subject to change without notice. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO DSAG5710 APPROVED WYNEC DATE MAY/18/2007 DRAWN Y.L.LI PAGE 1 OF 7 ERP 1203005323 Selection Guide Dice Lens Type Blue InGaN APHFT1612PBASURKVGAC Hyper Red InGaAlP WATER CLEAR Green InGaN Notes is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Luminous intensity/ luminous Flux: Iv mcd [2] Viewing 20mA Angle [1] Min. Typ. 120° Electrical / Optical Characteristics at TA=25°C Parameter Device λpeak Peak Wavelength Blue Hyper Red Green λD [1] Dominant Wavelength Spectral Line Half-width Capacitance VF [2] Forward Voltage Blue Hyper Red Green Blue Hyper Red

PDF Datasheet Preview

PRELIMINARY SPEC

ATTENTION

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
z 1.6x1.26mm SMT LED, 0.52mm THICKNESS. z LOW POWER CONSUMPTION. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL z RoHS COMPLIANT.

Package Dimensions
1.6X1.26mm SMD CHIP LED LAMP

Part Number APHFT1612PBASURKVGAC Blue Hyper Red Green

The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.

Notes All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Specifications are subject to change without notice. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO DSAG5710 APPROVED WYNEC

DATE MAY/18/2007 DRAWN Y.L.LI

PAGE 1 OF 7 ERP 1203005323

Selection Guide

Dice

Lens Type

Blue InGaN

APHFT1612PBASURKVGAC Hyper Red InGaAlP

WATER CLEAR

Green InGaN

Notes is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Luminous intensity/ luminous Flux:

Iv mcd [2] Viewing
20mA

Angle [1]

Min. Typ.
120°

Electrical / Optical Characteristics at TA=25°C

Parameter

Device
λpeak

Peak Wavelength

Blue Hyper Red

Green
λD [1]

Dominant Wavelength

Spectral Line Half-width

Capacitance

VF [2]

Forward Voltage

Blue Hyper Red

Green

Blue Hyper Red

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived APHFT1612PBASURKVGAC Datasheet file may be downloaded here without warranties.

Datasheet ID: APHFT1612PBASURKVGAC 644856