ACSC03-41EWA-F01

ACSC03-41EWA-F01 Datasheet

Part Number ACSC03-41EWA-F01 High Efficiency Red

Part	Datasheet
ACSC03-41EWA-F01	ACSC03-41EWA-F01 (pdf)

PDF Datasheet Preview
z INCH DIGIT HEIGHT. z LOW CURRENT OPERATION. z EXCELLENT CHARACTER APPEARANCE. z I.C. COMPATIBLE. z MECHANICALLY RUGGED. z GRAY FACE,WHITE SEGMENT. z PACKAGE 550PCS / REEL. z MOISTURE SENSITIVITY LEVEL z RoHS COMPLIANT. SURFACE MOUNT DISPLAY Part Number ACSC03-41EWA-F01 High Efficiency Red The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes All dimensions are in millimeters inches , Tolerance is ±0.25 0.01" unless otherwise noted. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO DSAH9976 APPROVED WYNEC DATE DEC/19/2007 DRAWN Ting.Li PAGE 1 OF 5 ERP 1351000454 Selection Guide Dice Lens Type Iv ucd [1] 10mA Min. Typ. ACSC03-41EWA-F01 High Efficiency Red GaAsP/GaP WHITE DIFFUSED 1200 Note Luminous intensity/ luminous Flux: 4210 Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25°C Parameter Device λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength High Efficiency Red Spectral Line Half-width High Efficiency Red Capacitance High Efficiency Red VF [2] Forward Voltage High Efficiency Red Notes 1.Wavelength +/-1nm. Forward Voltage +/-0.1V. High Efficiency Red Typ. 627 625 45 15 Max. Units nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V

PDF Datasheet Preview

z INCH DIGIT HEIGHT. z LOW CURRENT OPERATION. z EXCELLENT CHARACTER APPEARANCE. z I.C. COMPATIBLE. z MECHANICALLY RUGGED. z GRAY FACE,WHITE SEGMENT. z PACKAGE 550PCS / REEL. z MOISTURE SENSITIVITY LEVEL z RoHS COMPLIANT.

SURFACE MOUNT DISPLAY

Part Number ACSC03-41EWA-F01 High Efficiency Red

The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.

Package Dimensions& Internal Circuit Diagram

Notes All dimensions are in millimeters inches , Tolerance is ±0.25 0.01" unless otherwise noted. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm.

SPEC NO DSAH9976 APPROVED WYNEC

DATE DEC/19/2007 DRAWN Ting.Li

PAGE 1 OF 5 ERP 1351000454

Selection Guide

Dice

Lens Type

Iv ucd [1] 10mA

Min. Typ.

ACSC03-41EWA-F01 High Efficiency Red GaAsP/GaP WHITE DIFFUSED 1200

Note Luminous intensity/ luminous Flux:
4210

Common Cathode, Rt. Hand Decimal.

Electrical / Optical Characteristics at TA=25°C

Parameter

Device
λpeak

Peak Wavelength

High Efficiency Red
λD [1]

Dominant Wavelength

High Efficiency Red

Spectral Line Half-width

High Efficiency Red

Capacitance

High Efficiency Red

VF [2]

Forward Voltage

High Efficiency Red

Notes 1.Wavelength +/-1nm. Forward Voltage +/-0.1V.

High Efficiency Red

Typ. 627 625 45 15

Max.

Units nm pF V uA

Test Conditions IF=20mA IF=20mA IF=20mA

VF=0V;f=1MHz IF=20mA VR=5V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACSC03-41EWA-F01 Datasheet file may be downloaded here without warranties.

Datasheet ID: ACSC03-41EWA-F01 644852