C1206C225J8RACTU

C1206C225J8RACTU Datasheet

C1206C

Part	Datasheet
C1206C225J8RACTU	C1206C225J8RACTU (pdf)

PDF Datasheet Preview
Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade Overview KEMET’s X7R dielectric features a 125°C maximum operating temperature and is considered “temperature stable.” The Electronics Components, Assemblies & Materials Association EIA characterizes X7R dielectric as a Class II material. Components of this classification are fixed, ceramic dielectric capacitors suited for bypass and decoupling applications or for frequency discriminating circuits where Q and stability of capacitance characteristics are not critical. X7R exhibits a predictable change in capacitance with respect to time and voltage and boasts a minimal change in capacitance with reference to ambient temperature. Capacitance change is limited to ±15% from −55°C to +125°C. • −55°C to +125°C operating temperature range • Lead Pb -free, RoHS, and REACH Compliant • Temperature stable dielectric • EIA 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 2225 case sizes • DC voltage ratings of V, 10 V, 16 V, 25 V, 35 V, 50 V, 100 V, 200 V, and 250 V • Capacitance offerings ranging from 10 pF to 47 uF • Available capacitance tolerances of ±5%, ±10% and ±20% • Non-polar device, minimizing installation concerns • 100% pure matte tin-plated termination finish allowing for excellent solderability • SnPb termination finish option available upon request 5% Pb minimum Ordering Information Typical applications include decoupling, bypass, filtering and transient voltage suppression. Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality C 1206 Ceramic Case Size L" x W" Specification/ Series1 Capacitance Code pF 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 C = Standard Two significant digits + number of zeros. Capacitance Rated Voltage Tolerance J = ±5% K = ±10% M = ±20% 9 = 8 = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = 100 2 = 200 A = 250 Dielectric R = X7R Failure Rate/ Design A = N/A Termination Packaging/ Finish2 Grade C-Spec C = 100% Matte Sn See “Packaging C-Spec Ordering Options Table” below 1 Flexible termination option is available. Please see FT-CAP product bulletin C1013_X7R_FT-CAP_SMD. 2 Additional termination finish options may be available. Contact KEMET for details. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • One world. One KEMET C1002_X7R_SMD • 7/21/2016 1 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade Packaging C-Spec Ordering Options Table Packaging Type1 Packaging/Grade Ordering Code C-Spec Bulk Bag/Unmarked Not required Blank 7" Reel/Unmarked 13" Reel/Unmarked 7" Reel/Marked 13" Reel/Marked 7" Reel/Unmarked/2mm pitch2 13" Reel/Unmarked/2mm pitch2 TU 7411 EIA 0603 and smaller case sizes 7210 EIA 0805 and larger case sizes TM 7040 EIA 0603 and smaller case sizes 7215 EIA 0805 and larger case sizes 7081 7082 1 Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging. 1 The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information see "Capacitor Marking". 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 1608 metric case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information". Dimensions Millimeters Inches EIA Size Code 0402 0603 0805 1206 Metric Size Code 1005 1608 2012 3216 L Length W Width T Thickness B Bandwidth S Separation Minimum Mounting Technique Solder Reflow Only Solder Wave or Solder Reflow 12101 1808 3225 See Table 2 4520 for Thickness 1812 4532 1825 4564 Solder Reflow Only 2220 5650 2225 5664 1 For capacitance values µF add to the width tolerance dimension and to the length tolerance dimension. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1002_X7R_SMD • 7/21/2016 2 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade Qualification/Certification Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. Environmental Compliance Lead Pb -free, RoHS, and REACH compliant without exemptions. Electrical Parameters/Characteristics Item Operating Temperature Range Capacitance Change with Reference to +25°C and 0 VDC Applied TCC 1Aging Rate Maximum % Capacitance Loss/Decade Hour Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA 0603 1608 metric case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information". KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1002_X7R_SMD • 7/21/2016 10 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade Table 2A Chip Thickness/Tape & Reel Packaging Quantities cont'd Thickness Code HC HD HE HF JB JC JD JE JF JO KB KC KD KE Thickness Code Case Size1 1825 2220 2225 Case Size1 Thickness ± Range mm ± ± ± ± ± ± ± ± ± ± ± ± ± Thickness ± Range mm Paper Quantity1 7" Reel 7" Reel 13" Reel 13" Reel Paper Quantity1 Plastic Quantity 7" Reel 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 1,000 1,000 13" Reel 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 2,000 4,000 4,000 4,000 4,000 7" Reel 13" Reel Plastic Quantity Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA 0603 1608 metric case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information". Table 2B Bulk Packaging Quantities Packaging Type Loose Packaging Bulk Bag default Packaging C-Spec1 N/A2 Case Size Packaging Quantities pieces/unit packaging EIA in Metric mm Minimum Maximum 0402 1005 0603 1608 0805 2012 50,000 1206 3216 1210 3225 1808 4520 1812 4532 1825 4564 20,000 2220 5650 2225 5664 1 The "Packaging C-Spec" is a 4 to 8 digit code which identifies the packaging type and/or product grade. When ordering, the proper code must be included in the 15th through 22nd character positions of the ordering code. See "Ordering Information" section of this document for further details. Commercial Grade product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. Contact KEMET if you require a bulk bag packaging option for Automotive Grade products. 2 A packaging C-Spec see note 1 above is not required for "Bulk Bag" packaging excluding Anti-Static Bulk Bag and Automotive Grade products . The 15th through 22nd character positions of the ordering code should be left blank. All product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1002_X7R_SMD • 7/21/2016 11 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade Table 3 Chip Capacitor Land Pattern Design Recommendations per EIA Size Code 0402 Metric Size Code 1005 Density Level A Maximum Most Land Protrusion mm X V1 V2 Density Level B Median Nominal Land Protrusion mm X V1 V2 Density Level C Minimum Least Land Protrusion mm X V1 V2 0603 1608 0805 2012 1206 3216 1210 3225 12101 3225 1808 4520 1812 4532 1825 4564 2220 5650 2225 5664 1 Only for capacitance values 22 µF Density Level A For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805, and 1206 case sizes. Density Level B For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 Image below based on Density Level B for an EIA 1210 case size. Grid Placement Courtyard KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1002_X7R_SMD • 7/21/2016 12 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade These surface mount multilayer ceramic capacitors are normally supplied unmarked. If required, they can be marked as an extra cost option. Marking is available on most KEMET devices but must be requested using the correct ordering code identifier s . If this option is requested, two sides of the ceramic body will be laser marked with a “K” to identify KEMET, followed by two characters per - see table below to identify the capacitance value. EIA 0603 case size devices are limited to the “K” character only. Laser marking option is not available on • C0G, Ultra Stable X8R and Y5V dielectric devices • EIA 0402 case size devices • EIA 0603 case size devices with Flexible Termination option. • KPS Commercial and Automotive Grade stacked devices. • X7R dielectric products in capacitance values outlined below Marking appears in legible contrast. Illustrated below is an example of an MLCC with laser marking of “KA8”, which designates a KEMET device with rated capacitance of 100 µF. Orientation of marking is vendor optional. KEMET ID 2-Digit Capacitance Code EIA Case Size 0603 0805 1206 1210 1808 1812 1825 2220 2225 Metric Size Code 1608 2012 3216 3225 4520 4532 4564 5650 5664 Capacitance 170 pF 150 pF 910 pF 2,000 pF 3,900 pF 6,700 pF µF µF µF KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1002_X7R_SMD • 7/21/2016 16 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade Capacitor Marking Optional cont’d Alpha Character A B C D E F G H J K L M N P Q R S T U V W X Y Z a b d e f m n t y Capacitance pF For Various Alpha/Numeral Identifiers Numeral Capacitance pF 1,000 10,000 100,000 1,000,000 10,000,000 1,100 11,000 110,000 1,100,000 11,000,000 1,200 12,000 120,000 1,200,000 12,000,000 1,300 13,000 130,000 1,300,000 13,000,000 1,500 15,000 150,000 1,500,000 15,000,000 1,600 16,000 160,000 1,600,000 16,000,000 1,800 18,000 180,000 1,800,000 18,000,000 200 2,000 20,000 200,000 2,000,000 20,000,000 220 2,200 22,000 220,000 2,200,000 22,000,000 240 2,400 24,000 240,000 2,400,000 24,000,000 270 2,700 27,000 270,000 2,700,000 27,000,000 300 3,000 30,000 300,000 3,000,000 30,000,000 330 3,300 33,000 330,000 3,300,000 33,000,000 360 3,600 36,000 360,000 3,600,000 36,000,000 3,900 39,000 390,000 3,900,000 39,000,000 430 4,300 43,000 430,000 4,300,000 43,000,000 4,700 47,000 470,000 4,700,000 47,000,000 5,100 51,000 510,000 5,100,000 51,000,000 Packaging Ordering Code C-Spec Packaging Type/Options C-3190 C-3191 C-7081 C-7082 Automotive grade 7" reel unmarked Automotive grade 13" reel unmarked Commercial grade 7" reel unmarked Commercial grade 13" reel unmarked * 2 mm pitch reel only available for 0603 EIA case size. 2 mm pitch reel for 0805 EIA case size under development. Benefits of Changing from 4 mm to 2 mm Pitching Spacing • Lower placement costs • Double the parts on each reel results in fewer reel changes and increased efficiency • Fewer reels result in lower packaging, shipping and storage costs, reducing waste KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1002_X7R_SMD • 7/21/2016 18 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade Figure 1 Embossed Plastic Carrier Tape Dimensions ØDo Po [10 pitches cumulative tolerance on tape ± mm] Ko B1 Ao Bo Center Lines of Cavity Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. User Direction of Unreeling ØD 1 Embossment For cavity size, see Note 1 Table 4 Table 6 Embossed Plastic Carrier Tape Dimensions Metric will govern Tape Size 8 mm 12 mm 16 mm Constant Dimensions Millimeters Inches D1 Minimum Note 1 R Reference S1 Minimum Note 2 Note 3 Maximum T1 Maximum Tape Size 8 mm 12 mm 16 mm Pitch Single 4 mm Single 4 mm & Double 8 mm Triple 12 mm Variable Dimensions Millimeters Inches B1 Maximum Note 4 E2 Minimum T2 Maximum W Maximum

PDF Datasheet Preview

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs

X7R Dielectric, 250 VDC Commercial Grade

Overview

KEMET’s X7R dielectric features a 125°C maximum operating temperature and is considered “temperature stable.” The Electronics Components, Assemblies & Materials Association EIA characterizes X7R dielectric as a Class II material. Components of this classification are fixed, ceramic dielectric capacitors suited for bypass and decoupling applications or for frequency discriminating
circuits where Q and stability of capacitance characteristics are not critical. X7R exhibits a predictable change in capacitance with respect to time and voltage and boasts a minimal change in capacitance with reference to ambient temperature. Capacitance change is limited to ±15% from −55°C to +125°C.
• −55°C to +125°C operating temperature range
• Lead Pb -free, RoHS, and REACH Compliant
• Temperature stable dielectric
• EIA 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220,
and 2225 case sizes
• DC voltage ratings of V, 10 V, 16 V, 25 V, 35 V, 50 V,
100 V, 200 V, and 250 V
• Capacitance offerings ranging from 10 pF to 47 uF
• Available capacitance tolerances of ±5%, ±10% and ±20%
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated termination finish allowing for
excellent solderability
• SnPb termination finish option available upon request
5% Pb minimum
Ordering Information

Typical applications include decoupling, bypass, filtering and transient voltage suppression.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

C 1206

Ceramic

Case Size L" x W"

Specification/ Series1

Capacitance Code pF
0402 0603 0805 1206 1210 1808 1812 1825 2220 2225

C = Standard

Two significant
digits + number of
zeros.

Capacitance Rated Voltage

Tolerance

J = ±5% K = ±10% M = ±20%
9 = 8 = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = 100 2 = 200 A = 250

Dielectric R = X7R

Failure Rate/ Design A = N/A

Termination Packaging/ Finish2 Grade C-Spec

C = 100% Matte Sn

See “Packaging
C-Spec Ordering Options Table” below
1 Flexible termination option is available. Please see FT-CAP product bulletin C1013_X7R_FT-CAP_SMD. 2 Additional termination finish options may be available. Contact KEMET for details.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

One world. One KEMET C1002_X7R_SMD
• 7/21/2016 1

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade
Packaging C-Spec Ordering Options Table

Packaging Type1
Packaging/Grade Ordering Code C-Spec

Bulk Bag/Unmarked

Not required Blank
7" Reel/Unmarked 13" Reel/Unmarked 7" Reel/Marked 13" Reel/Marked 7" Reel/Unmarked/2mm pitch2 13" Reel/Unmarked/2mm pitch2

TU 7411 EIA 0603 and smaller case sizes 7210 EIA 0805 and larger case sizes

TM 7040 EIA 0603 and smaller case sizes 7215 EIA 0805 and larger case sizes
7081
7082
1 Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging. 1 The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors
that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information see "Capacitor Marking". 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 1608 metric case
size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information".

Dimensions Millimeters Inches

EIA Size Code
0402
0603
0805
1206

Metric Size Code
1005
1608
2012
3216

L Length

W Width

T Thickness

B Bandwidth

S Separation Minimum

Mounting Technique

Solder Reflow Only

Solder Wave or Solder Reflow
12101 1808
3225 See Table 2 4520 for Thickness
1812 4532
1825 4564

Solder Reflow Only
2220 5650
2225 5664
1 For capacitance values µF add to the width tolerance dimension and to the length tolerance dimension.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1002_X7R_SMD
• 7/21/2016 2

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade

Qualification/Certification

Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability.

Environmental Compliance

Lead Pb -free, RoHS, and REACH compliant without exemptions.

Electrical Parameters/Characteristics

Item

Operating Temperature Range Capacitance Change with Reference to
+25°C and 0 VDC Applied TCC 1Aging Rate Maximum % Capacitance Loss/Decade Hour
Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA
0603 1608 metric case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information".

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1002_X7R_SMD
• 7/21/2016 10

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade

Table 2A Chip Thickness/Tape & Reel Packaging Quantities cont'd

Thickness Code

HC HD HE HF JB JC JD JE JF JO KB KC KD KE

Thickness Code

Case Size1
1825 2220 2225

Case Size1

Thickness ± Range mm
± ± ± ± ± ± ± ± ± ± ± ± ±

Thickness ± Range mm

Paper Quantity1
7" Reel
7" Reel
13" Reel
13" Reel

Paper Quantity1

Plastic Quantity
7" Reel
1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 1,000 1,000
13" Reel
4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 2,000 4,000 4,000 4,000 4,000
7" Reel
13" Reel

Plastic Quantity
Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA
0603 1608 metric case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information".

Table 2B Bulk Packaging Quantities

Packaging Type

Loose Packaging Bulk Bag default

Packaging C-Spec1

N/A2

Case Size

Packaging Quantities pieces/unit packaging

EIA in

Metric mm

Minimum

Maximum
0402
1005
0603
1608
0805
2012
50,000
1206
3216
1210
3225
1808
4520
1812
4532
1825
4564
20,000
2220
5650
2225
5664
1 The "Packaging C-Spec" is a 4 to 8 digit code which identifies the packaging type and/or product grade. When ordering, the proper code must be included in the 15th through 22nd character positions of the ordering code. See "Ordering Information" section of this document for further details. Commercial Grade product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. Contact KEMET if you require a bulk bag packaging option for Automotive Grade products.
2 A packaging C-Spec see note 1 above is not required for "Bulk Bag" packaging excluding Anti-Static Bulk Bag and Automotive Grade products . The 15th through 22nd character positions of the ordering code should be left blank. All product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1002_X7R_SMD
• 7/21/2016 11

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade

Table 3 Chip Capacitor Land Pattern Design Recommendations per

EIA Size Code
0402

Metric Size Code
1005

Density Level A Maximum Most Land Protrusion mm

X V1 V2

Density Level B Median Nominal Land Protrusion mm

X V1 V2

Density Level C Minimum Least Land Protrusion mm

X V1 V2
0603
1608
0805
2012
1206
3216
1210
3225
12101
3225
1808
4520
1812
4532
1825
4564
2220
5650
2225
5664
1 Only for capacitance values 22 µF Density Level A For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805, and 1206 case sizes. Density Level B For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351

Image below based on Density Level B for an EIA 1210 case size.

Grid Placement Courtyard

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1002_X7R_SMD
• 7/21/2016 12

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade
These surface mount multilayer ceramic capacitors are normally supplied unmarked. If required, they can be marked as an extra cost option. Marking is available on most KEMET devices but must be requested using the correct ordering code identifier s . If this option is requested, two sides of the ceramic body will be laser marked with a “K” to identify KEMET, followed by two characters per - see table below to identify the capacitance value. EIA 0603 case size devices are limited to the “K” character only.

Laser marking option is not available on
• C0G, Ultra Stable X8R and Y5V dielectric devices
• EIA 0402 case size devices
• EIA 0603 case size devices with Flexible Termination
option.
• KPS Commercial and Automotive Grade stacked devices.
• X7R dielectric products in capacitance values outlined below

Marking appears in legible contrast. Illustrated below is an example of an MLCC with laser marking of “KA8”, which designates a KEMET device with rated capacitance of 100 µF. Orientation of marking is vendor optional.

KEMET ID
2-Digit Capacitance

Code

EIA Case Size
0603 0805 1206 1210 1808 1812 1825 2220 2225

Metric Size Code
1608 2012 3216 3225 4520 4532 4564 5650 5664

Capacitance
170 pF 150 pF 910 pF 2,000 pF 3,900 pF 6,700 pF µF µF µF

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1002_X7R_SMD
• 7/21/2016 16

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade

Capacitor Marking Optional cont’d

Alpha Character

A B C D E F G H J K L M N P Q R S T U V W X Y Z a b d e f m n t y

Capacitance pF For Various Alpha/Numeral Identifiers

Numeral

Capacitance pF
1,000 10,000 100,000 1,000,000 10,000,000
1,100 11,000 110,000 1,100,000 11,000,000
1,200 12,000 120,000 1,200,000 12,000,000
1,300 13,000 130,000 1,300,000 13,000,000
1,500 15,000 150,000 1,500,000 15,000,000
1,600 16,000 160,000 1,600,000 16,000,000
1,800 18,000 180,000 1,800,000 18,000,000
200 2,000 20,000 200,000 2,000,000 20,000,000
220 2,200 22,000 220,000 2,200,000 22,000,000
240 2,400 24,000 240,000 2,400,000 24,000,000
270 2,700 27,000 270,000 2,700,000 27,000,000
300 3,000 30,000 300,000 3,000,000 30,000,000
330 3,300 33,000 330,000 3,300,000 33,000,000
360 3,600 36,000 360,000 3,600,000 36,000,000
3,900 39,000 390,000 3,900,000 39,000,000
430 4,300 43,000 430,000 4,300,000 43,000,000
4,700 47,000 470,000 4,700,000 47,000,000
5,100 51,000 510,000 5,100,000 51,000,000
Packaging Ordering Code

C-Spec

Packaging Type/Options

C-3190 C-3191 C-7081 C-7082

Automotive grade 7" reel unmarked Automotive grade 13" reel unmarked Commercial grade 7" reel unmarked Commercial grade 13" reel unmarked
* 2 mm pitch reel only available for 0603 EIA case size. 2 mm pitch reel for 0805 EIA case size under development.

Benefits of Changing from 4 mm to 2 mm Pitching Spacing
• Lower placement costs
• Double the parts on each reel results in fewer reel
changes and increased efficiency
• Fewer reels result in lower packaging, shipping and
storage costs, reducing waste

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1002_X7R_SMD
• 7/21/2016 18

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs X7R Dielectric, 250 VDC Commercial Grade

Figure 1 Embossed Plastic Carrier Tape Dimensions
ØDo

Po [10 pitches cumulative
tolerance on tape ± mm]

Ko B1

Ao Bo

Center Lines of Cavity

Cover Tape

B 1 is for tape feeder reference only, including draft concentric about B o.

User Direction of Unreeling
ØD 1

Embossment For cavity size, see Note 1 Table 4

Table 6 Embossed Plastic Carrier Tape Dimensions

Metric will govern

Tape Size 8 mm 12 mm 16 mm

Constant Dimensions Millimeters Inches

D1 Minimum Note 1

R Reference S1 Minimum

Note 2

Note 3 Maximum

T1 Maximum

Tape Size 8 mm 12 mm 16 mm

Pitch

Single 4 mm Single 4 mm & Double 8 mm Triple 12 mm

Variable Dimensions Millimeters Inches

B1 Maximum Note 4

E2 Minimum

T2 Maximum

W Maximum

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived C1206C225J8RACTU Datasheet file may be downloaded here without warranties.

Datasheet ID: C1206C225J8RACTU 644825