B11B-PASK-1

B11B-PASK-1 Datasheet

B11B-PASK

Part	Datasheet
B11B-PASK-1	B11B-PASK-1 (pdf)

Related Parts	Information
B10B-PASK	B10B-PASK
B08B-PASK-1	B08B-PASK-1
B07B-PASK-1	B07B-PASK-1
B05B-PASK-1	B05B-PASK-1
B03B-PASK-1	B03B-PASK-1
B02B-PASK-1	B02B-PASK-1
B16B-PASK	B16B-PASK
B15B-PASK	B15B-PASK
B14B-PASK	B14B-PASK
B13B-PASK	B13B-PASK
B09B-PASK-1	B09B-PASK-1
B11B-PASK	B11B-PASK
B06B-PASK-1	B06B-PASK-1
B09B-PASK	B09B-PASK
B08B-PASK	B08B-PASK
B07B-PASK	B07B-PASK
B06B-PASK	B06B-PASK
B05B-PASK	B05B-PASK
B04B-PASK	B04B-PASK
B03B-PASK	B03B-PASK
B02B-PASK	B02B-PASK
B12B-PASK	B12B-PASK
S08B-PASK-2	S08B-PASK-2
S16B-PASK-2	S16B-PASK-2
S15B-PASK-2	S15B-PASK-2
S14B-PASK-2	S14B-PASK-2
S13B-PASK-2	S13B-PASK-2
S12B-PASK-2	S12B-PASK-2
S11B-PASK-2	S11B-PASK-2
B04B-PASK-1	B04B-PASK-1
S09B-PASK-2	S09B-PASK-2
B10B-PASK-1	B10B-PASK-1
S07B-PASK-2	S07B-PASK-2
S06B-PASK-2	S06B-PASK-2
B12B-PASK-1	B12B-PASK-1
S04B-PASK-2	S04B-PASK-2
S03B-PASK-2	S03B-PASK-2
S02B-PASK-2	S02B-PASK-2
B16B-PASK-1	B16B-PASK-1
B15B-PASK-1	B15B-PASK-1
B14B-PASK-1	B14B-PASK-1
B13B-PASK-1	B13B-PASK-1
S05B-PASK-2	S05B-PASK-2
S10B-PASK-2	S10B-PASK-2

PDF Datasheet Preview
2.0mm pitch PA FAMILY SERIES/PA•PAF•PAL CONNECTOR Wire-to-board Crimp style/IDC / Wire-to-wire Crimp style/IDC Features • Secure locking device • Interchangeable between crimp and IDC socket Both crimp and IDC sockets use the same headers and wire-towire mating halves. • Secondary retainers Secondary retainers enhance safety in case of partial insertion or accidental release of the contact. • Harness variation PAL, wire-to-wire crimp style connector, increases wire harness variation. Based upon wire-to-board crimp style PA connectors, the PA series family of connector have been expanded to meet the requirement of complex wire harness of 2.0mm pitch connectors with secure locking mechanism thanks to the additional line up of wire-to-board IDC style PAF connectors and wire-to-wire crimp style PAL connectors. Retainer PAF Receptacle IDC style PA Shorouded header Top entry type Retainer Retainer PA Receptacle Crimp style Standard type PA Receptacle Crimp style Retainer mountable type PAF Receptacle IDC style PAL Crimp style Wire-to-wire PA Shorouded header Side entry type PA Shorouded header Top entry type Retainer * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards 0 Recognized E60389 1Certified LR20812 PA connector Standard type, Retainer mountable type • Highly reliable contact The box contact supplies stable contact performance even under conditions of vibration, distortion, low voltage or low current. • Insertion guide mechanism Header has housing insertion guides for easy and secure insertion. • Flanged press pin Top entry type header has flanged press pins, preventing accidental removal of the pins that might result from the distorted unmating especially in the case of small No. of circuits. PAF connector • The industry’s first secure lock IDC connectors By separating ID section and secure lock section, the industry’s first secure lock specification has been achieved for IDC that was said to be impossible. Our fully automatic IDC machines, BCD-M5BP for simple harness and CAM-M12B, SAD-M12E for multiharness , can be applied for harness making. • Metallic strain relief Metallic strain relief on the contact securely grips wire insulation that can avoid direct stress of vibration or impact. The same grip strength as insulation barrel of crimp style contact could be achieved. • Retainer with four locking points The new four locking points design ensures wire retention force of every direction that is almost superior to contact retention force of crimp style connectors. It also completely covers exposed terminated ID contact. PAL connector

PDF Datasheet Preview

2.0mm
pitch

PA FAMILY SERIES/PA•PAF•PAL CONNECTOR

Wire-to-board Crimp style/IDC / Wire-to-wire Crimp style/IDC Features
• Secure locking device
• Interchangeable between crimp and IDC socket

Both crimp and IDC sockets use the same headers and wire-towire mating halves.
• Secondary retainers

Secondary retainers enhance safety in case of partial insertion or accidental release of the contact.
• Harness variation

PAL, wire-to-wire crimp style connector, increases wire harness variation.

Based upon wire-to-board crimp style PA connectors, the PA series family of connector have been expanded to meet the requirement of complex wire harness of 2.0mm pitch connectors with secure locking mechanism thanks to the additional line up of wire-to-board IDC style PAF connectors and wire-to-wire crimp style PAL connectors.

Retainer

PAF Receptacle IDC style

PA Shorouded header Top entry type

Retainer

Retainer

PA Receptacle Crimp style Standard type

PA Receptacle Crimp style Retainer mountable type

PAF Receptacle IDC style

PAL Crimp style Wire-to-wire

PA Shorouded header Side entry type

PA Shorouded header Top entry type

Retainer
* Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog. * Contact JST for details.

Standards 0 Recognized E60389
1Certified LR20812

PA connector Standard type, Retainer mountable type
• Highly reliable contact

The box contact supplies stable contact performance even under conditions of vibration, distortion, low voltage or low current.
• Insertion guide mechanism

Header has housing insertion guides for easy and secure insertion.
• Flanged press pin

Top entry type header has flanged press pins, preventing accidental removal of the pins that might result from the distorted unmating especially in the case of small No. of circuits.

PAF connector
• The industry’s first secure lock IDC connectors

By separating ID section and secure lock section, the industry’s first secure lock specification has been achieved for IDC that was said to be impossible. Our fully automatic IDC machines, BCD-M5BP for simple harness and CAM-M12B, SAD-M12E for multiharness , can be applied for harness making.
• Metallic strain relief

Metallic strain relief on the contact securely grips wire insulation that can avoid direct stress of vibration or impact. The same grip strength as insulation barrel of crimp style contact could be achieved.
• Retainer with four locking points

The new four locking points design ensures wire retention force of every direction that is almost superior to contact retention force of crimp style connectors. It also completely covers exposed terminated ID contact.

PAL connector

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B11B-PASK-1 Datasheet file may be downloaded here without warranties.

Datasheet ID: B11B-PASK-1 644641