WD1F164WP1T22
WD1F164WP1T22 Datasheet
WD1 Series
| Part | Datasheet |
|---|---|
WD1F164WP1T22 |
WD1F164WP1T22 (pdf) |
| PDF Datasheet Preview |
|---|
| COMPONENTS PRODUCT INFORMATION Docking Connector Compatible to PCI Express WD1 Series CONNECTOR MB-0137-2 July 2006 Along with the shift of the internal transmission method of PC from PCI to PCI Express, the demands for high speed transmission connectors are increasing. WD1 Series are docking connectors available for PCI Express signal transmission. -Compatible to high speed serial transmission such as PCI Express. -Provided with contacts exclusively for power and modem, besides the signal contacts. -Contacts for modem, satisfies the withstand voltage 1500V. -Comes with ground bar compatible with ESD on receptacle side -Compatible to automatic mounting/ reflow Available in tray with kapton tape /plastic -Receptacle side height 6.1mm, mating height 16.5mm -Mating order shell, power contact large , signal contact and power contact small . General Specifications -No. of contacts :164 pos. signal + 4 power -Contact resistance 160m ohm max. 180m ohm max. after test -Dielectric withstanding voltage AC500V per minute -Operating temperature -40 Deg. C to +85 Deg. C -Rated current 0.5A/ per pin -Durability 10,000 mating cycle 1/4 JAE PMK Div. Proprietary. Copyright Aviation Electronics Industry, Ltd. Materials and Finishes MB-0137-2 Components Materials/ Finishes Contact 1 Receptacle Phosphor bronze Contact 0.1um min. Au plating over Ni Terminal Tin plating Contact 2 Copper alloy Same as abvoe Power contact Copper alloy Same as abvoe Insulator Glass filled LCP Shell Steel Tin plating Plate Brass Tin plating Hold pin Copper alloy 0.03um min. Au plating Tape Heat-resistant tape Contact 1 Copper alloy Plug Contact 0.1um min. Au plating over Ni Terminal 0.03um min. Au plating Ordering Information WD1 F Series F Receptacle portion M Plug portion 164 W P 1 Modification code Plating Specification No. of contacts W Straight, without hold down 2/4 JAE PMK Div. Proprietary. Copyright Aviation Electronics Industry, Ltd. MB-0137-2 Receptacle side WD1F104WP1 SJ100558 Provided in tray WD1F164WP1T22 SJ100559 Mating condition 3/4 JAE PMK Div. Proprietary. Copyright Aviation Electronics Industry, Ltd. MB-0137-2 Receptacle side WD1M164WA1 SJ100556 Provided in tray WD1M164WA1T18 SJ100557 Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone +81-3-3780-2787 FAX +81-3-3780-2946 Notice Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications computers, office machines, measuring devices, telecommunication devices terminals, mobile devices , AV devices, household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright Aviation Electronics Industry, Ltd. |
| More datasheets: MT3030-WT-A | MM74HC4514N | MM74HC4514MTC | MM74HC4514WMX | MM74HC4514WM | MM74HC4514MTCX | CAF96257(IDD5250-RS36E) | G-NIMO-005 | G-NIMO-004 | G-NIMO-003 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived WD1F164WP1T22 Datasheet file may be downloaded here without warranties.