SF56S006V4AR2000

SF56S006V4AR2000 Datasheet

SF56 Series

Part	Datasheet
SF56S006V4AR2000	SF56S006V4AR2000 (pdf)

PDF Datasheet Preview
COMPONENTS PRODUCT INFORMATION Micro SIM Card Connector SF56 Series CONNECTOR MB-0256-1 December 2012 There is growing demand for Micro SIM Mini UICC cards for use in smartphones and tablets. The “SF56 Series” is a push-push type connector compatible with the micro SIM card. SIM Subscriber Identity Module 1.25mm height, 14.4mm width, and 16.0mm depth designed to save space when mounting. It is the industry’s most lowest-profile, push-push type connector. Designed for easy operation with a card ejection stroke of 4.1mm. Card detection switch normal closed for preventing incomplete insertion. Design allows for visual check / repair of the terminals after the SMT mounting process. Balanced four hold-down points for good EMI performance. Pb-free, halogen-free compliant product. Supports automated mounting with embossed tape. General Specifications • No. of Contacts 6 positions • Contact Resistance: initial • Dielectric Withstanding Voltage: AC 500Vr.m.s. per minute • Operating Temperature: -25 Deg. C to +85 Deg. C •Rated Current 0.5A per pin •Rated Voltage 10V per pin •Durability 5,000 times JAE PMK Div. Proprietary. Copyright 2012, Japan Aviation Electronics Industry, Ltd. Materials and Finishes MB-0256-1 Component Signal Contact Detection-SW Contact Housing Cover Frame Eject Bar Spring Cam Follower Material / Finish Copper Alloy / Au plating over Ni min. contact area Copper Alloy / Au flash plating over Ni terminal area Synthetic Resin / None Stainless Steel / Terminal area Au flash plating over Ni Synthetic Resin / None Stainless Steel / None Stainless Steel / None Ordering Information SF56 S 006 V 4 A R2000 Series Reel Part Number Note Connector Structure S Non-ZIF structure No. of Contacts 6 pos. Contact Area Finish Au / Au flash plating V SMT mounting with hold-downs Note An embossed tape reel contains 2,000 pcs. Please contact us for details on the embossed tape specifications. Drawing Number Part Number SF56S006V4A SJ Drawing Package Drawing JACS Number SJ112873 SJ112874 JACS-10928 Remarks - JAE PMK Div. Proprietary. Copyright 2012, Japan Aviation Electronics Industry, Ltd. Product Drawing • SF56S006V4A <Drawing of Individual Connector> MB-0256-1 Unit mm JAE PMK Div. Proprietary. Copyright 2012, Japan Aviation Electronics Industry, Ltd. <Applicable Dimensions of Board for reference > MB-0256-1 Note Please keep case off of the indicated surface. Note Vacuum Area Note Only ground pattern and ground via holes are allowed in the indicated area, as the bottom is composed of metal ground . Note Pattern and via holes cannot be applied to the indicated area due to moving contact parts. Note PCB cutout area. Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone +81-3-3780-2882 FAX +81-3-3780-2946 Notice Products shown in this brochure are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for lifesupport systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications Computers, Office machines, Measuring devices, Telecommunication devices Terminals, Mobile devices , AV devices, Household applications, FA devices, etc. The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright 2012, Japan Aviation Electronics Industry, Ltd.

PDF Datasheet Preview

COMPONENTS PRODUCT INFORMATION

Micro SIM Card Connector

SF56 Series

CONNECTOR

MB-0256-1 December 2012

There is growing demand for Micro SIM Mini UICC cards for use in smartphones and tablets. The “SF56 Series” is a push-push type connector compatible with the micro SIM card. *SIM Subscriber Identity Module
1.25mm height, 14.4mm width, and 16.0mm depth designed to save space when mounting. It is the industry’s most lowest-profile, push-push type connector.

Designed for easy operation with a card ejection stroke of 4.1mm. Card detection switch normal closed for preventing incomplete insertion. Design allows for visual check / repair of the terminals after the SMT mounting
process. Balanced four hold-down points for good EMI performance. Pb-free, halogen-free compliant product. Supports automated mounting with embossed tape.

General Specifications
• No. of Contacts 6 positions
• Contact Resistance:
initial
• Dielectric Withstanding Voltage:

AC 500Vr.m.s. per minute
• Operating Temperature:
-25 Deg. C to +85 Deg. C
•Rated Current 0.5A per pin
•Rated Voltage 10V per pin
•Durability 5,000 times

JAE PMK Div. Proprietary. Copyright 2012, Japan Aviation Electronics Industry, Ltd.

Materials and Finishes

MB-0256-1

Component Signal Contact Detection-SW Contact

Housing Cover Frame

Eject Bar Spring

Cam Follower

Material / Finish Copper Alloy / Au plating over Ni min. contact area

Copper Alloy / Au flash plating over Ni terminal area Synthetic Resin / None

Stainless Steel / Terminal area Au flash plating over Ni Synthetic Resin / None Stainless Steel / None Stainless Steel / None
Ordering Information

SF56 S 006 V 4 A R2000

Series

Reel Part Number Note

Connector Structure S Non-ZIF structure

No. of Contacts 6 pos.

Contact Area Finish Au / Au flash plating

V SMT mounting with hold-downs

Note An embossed tape reel contains 2,000 pcs. Please contact us for details on the embossed tape specifications.

Drawing Number

Part Number SF56S006V4A

SJ Drawing Package Drawing JACS Number

SJ112873

SJ112874

JACS-10928

Remarks -

JAE PMK Div. Proprietary. Copyright 2012, Japan Aviation Electronics Industry, Ltd.

Product Drawing
• SF56S006V4A
<Drawing of Individual Connector>

MB-0256-1

Unit mm

JAE PMK Div. Proprietary. Copyright 2012, Japan Aviation Electronics Industry, Ltd.
<Applicable Dimensions of Board for reference >

MB-0256-1

Note Please keep case off of the indicated surface.

Note Vacuum Area

Note Only ground pattern and ground via holes are allowed in the indicated area, as the bottom is composed of metal ground .

Note Pattern and via holes cannot be applied to the indicated area due to moving contact parts.

Note PCB cutout area.

Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone +81-3-3780-2882 FAX +81-3-3780-2946

Notice Products shown in this brochure are made
for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for lifesupport systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications Computers, Office machines, Measuring devices, Telecommunication devices Terminals, Mobile devices , AV devices, Household applications, FA devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.

JAE PMK Div. Proprietary. Copyright 2012, Japan Aviation Electronics Industry, Ltd.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SF56S006V4AR2000 Datasheet file may be downloaded here without warranties.

Datasheet ID: SF56S006V4AR2000 644566