350-FI-2B

350-FI-2B Datasheet

1.Applicator Part description of the applicator used 350-FI-2B Applicable Press

Part	Datasheet
350-FI-2B	350-FI-2B (pdf)

PDF Datasheet Preview
DCF-S-0033-1 95.5 Japan Aviation Electronics Industry, Ltd. Number Connector Division 1／9 Spec: Original issued Feb. 14 , 2001 TITLE: DCN-No. Prep Chkd Appd Crimp Data for Series FI-C3-A1 / FI-XC3-1 / 2 Sep.18.2003 053322 D.TSURUTA S.SHIMIZU A.IWASAKI FI-AC3-1 / FI-RC3-1A / FI-RC3-1B contacts 3 Nov.20.2003 053790 S.SHIMIZU A.IWASAKI ISSUED 2ND PRODUCTION Engineering Dept. 4 Jun.20.2005 057605 T.OOKAWA S.SHIMIZU A.IWASAKI Prepared Checked Approved F.Kawano K.KOIDE A.IWASAKI Y.NOSE CAUTION ● Check that operation manual T703000-01E applicator is provided in addition to this not, contact us. ● Be sure to read T703000-01E before operation since all safety precautions are described in it. ● Properly keep this operation manual and T703000-01E near the applicator so that anyone can refer to them at anytime. ● Be sure to use the machine by following the instructions given in this operation manual and T703000-01E. Otherwise, we will not be responsible for any accidents that may result. ● Don't to repair or adjust, without the procedure specified with this operation manual, it cause is to brake the tool or product the rejected items. If you feel the tool abnormally or brake the tool, please inquire our shop or tool service, and repair it. JAE Connector Div. Proprietary. Copyright 2001, Japan Aviation Electronics Industry Ltd. Japan Aviation Electronics Industry, Number Connector Division 1.Applicator Part description of the applicator used 350-FI-2B Applicable Press DCF-S-0033-2 95.5 2／9 Part description of applicable contact and wire Applicable wire is stranded 7 annealed copper. conductors. Using not specified wire, please ask us whether the wire is usable or not. Contact part description FI-C3-A1-15000 FI-XC3-1-15000 FI-AC3-1-15000 FI-RC3-1A-15000 FI-RC3-1B-15000 Applicable wire AWG#28 thru AWG#32 AWG#30 thru AWG#36 AWG#30 thru AWG#36 AWG#30 thru AWG#32 Insulation diameter Less Note :The crimper,anvil and crimp condition differ in each contact. For details,plaese refer to paragraph 3.Allpicable wire , insulation diameter , and insulation stripped length 3-1.Applicable wire Vinyl insulated wire Insulation stripped length Insulation stripped length thru 1.7mm Note :Please make sure that the insulation stripped length is within the above dimension. At the time , inspect if wire is not damaged , cut , or disheveled. If so , remove or remedy it. JAE Connector Div. Proprietary. Copyright 2001, Japan Aviation Electronics Industry Ltd. Japan Aviation Electronics Industry, Number

PDF Datasheet Preview

DCF-S-0033-1 95.5

Japan Aviation Electronics Industry, Ltd.

Number

Connector Division
1／9

Spec:

Original issued Feb. 14 , 2001

TITLE:

DCN-No. Prep

Chkd Appd

Crimp Data for Series FI-C3-A1 / FI-XC3-1 / 2 Sep.18.2003 053322 D.TSURUTA S.SHIMIZU A.IWASAKI

FI-AC3-1 / FI-RC3-1A / FI-RC3-1B contacts 3 Nov.20.2003 053790 S.SHIMIZU

A.IWASAKI

ISSUED 2ND PRODUCTION Engineering Dept. 4 Jun.20.2005 057605 T.OOKAWA S.SHIMIZU A.IWASAKI

Prepared Checked Approved

F.Kawano K.KOIDE A.IWASAKI Y.NOSE

CAUTION
● Check that operation manual T703000-01E applicator is provided in addition to this not, contact us.
● Be sure to read T703000-01E before operation since all safety precautions are described in it.
● Properly keep this operation manual and T703000-01E near the applicator so that anyone can refer to them at anytime.
● Be sure to use the machine by following the instructions given in this operation manual and T703000-01E. Otherwise, we will not be responsible for any accidents that may result.
● Don't to repair or adjust, without the procedure specified with this operation manual, it cause is to brake the tool or product the rejected items. If you feel the tool abnormally or brake the tool, please inquire our shop or tool service, and repair it.

JAE Connector Div. Proprietary. Copyright 2001, Japan Aviation Electronics Industry Ltd.

Japan Aviation Electronics Industry,

Number

Connector Division
1.Applicator Part description of the applicator used 350-FI-2B Applicable Press

DCF-S-0033-2 95.5
2／9

Part description of applicable contact and wire Applicable wire is stranded 7 annealed copper. conductors. Using not specified wire, please ask us whether the wire is usable or not.

Contact part description FI-C3-A1-15000 FI-XC3-1-15000 FI-AC3-1-15000 FI-RC3-1A-15000 FI-RC3-1B-15000

Applicable wire AWG#28 thru AWG#32 AWG#30 thru AWG#36 AWG#30 thru AWG#36

AWG#30 thru AWG#32

Insulation diameter Less

Note :The crimper,anvil and crimp condition differ in each contact. For details,plaese refer to paragraph
3.Allpicable wire , insulation diameter , and insulation stripped length 3-1.Applicable wire Vinyl insulated wire

Insulation stripped length Insulation stripped length thru 1.7mm

Note :Please make sure that the insulation stripped length is within the above dimension. At the time , inspect if wire is not damaged , cut , or disheveled. If so , remove or remedy it.

JAE Connector Div. Proprietary. Copyright 2001, Japan Aviation Electronics Industry Ltd.

Japan Aviation Electronics Industry,

Number

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 350-FI-2B Datasheet file may be downloaded here without warranties.

Datasheet ID: 350-FI-2B 644532