CA3106F36-10PXB13

CA3106F36-10PXB13 Datasheet

Datasheet for part number CA3106F36-10PXB13

Part	Datasheet
CA3106F36-10PXB13	CA3106F36-10PXB13 (pdf)

PDF Datasheet Preview
Datasheet for part number CA3106F36-10PXB13 Our Catalog Part Number CA3106F36-10PXB-13 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 10/20 Contact Resistance Size 10/20 Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 10/20 Gage Coupling Torque Contact Retention Size 10/20 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 10/20 General Info Connector with bayonet coupling Plug, straight Shielded connector with endbell for shielded braids and heat shrinkable boots Pin 36-10 48 contacts size 10 Solder Cup Hard silver yes 125° 12 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 0,3 N For infos on Gage please see catalog VG95234, part 1 Closing 23 Nm max / Opening 1,03 Nm min 30 N Aluminium alloy Olive drab chromate over cadmium plating CR-Elastomere Copper alloy See assembly instruction See assembly instruction 4 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA3106F36-10PXB13

Our Catalog Part Number CA3106F36-10PXB-13 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet Bayonet Shell Style

Endbell Style

Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 10/20 Contact Resistance Size 10/20

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 10/20

Gage

Coupling Torque Contact Retention Size 10/20 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter Wire Stripping Size 10/20

General Info

Connector with bayonet coupling Plug, straight Shielded connector with endbell for shielded braids and heat shrinkable boots Pin 36-10 48 contacts size 10 Solder Cup Hard silver yes 125°
12 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 0,3 N For infos on Gage please see catalog VG95234, part 1 Closing 23 Nm max / Opening 1,03 Nm min 30 N Aluminium alloy Olive drab chromate over cadmium plating CR-Elastomere Copper alloy

See assembly instruction

See assembly instruction
4 mm All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA3106F36-10PXB13 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA3106F36-10PXB13 640089