CA3102R20-19PXF80

CA3102R20-19PXF80 Datasheet

Datasheet for part number CA3102R20-19PXF80

Part	Datasheet
CA3102R20-19PXF80	CA3102R20-19PXF80 (pdf)

PDF Datasheet Preview
Datasheet for part number CA3102R20-19PXF80 Our Catalog Part Number CA3102R20-19PX-F80 Brand Cannon Product Category Circular Product Line MIL-DTL 5015 Series I Series MIL-C-5015 Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 60/100/8 Contact Resistance Size 60/100/8 Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 60/100/8 Gage Coupling Torque Contact Retention Size 60/100/8 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 60/100/8 General Info Connector with threaded coupling Box mounting receptacle Pin 20-19 3 contacts size 8 AWG Crimp Hard silver no 180° 1 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 3,0 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 80 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy See assembly instruction See assembly instruction 11,8 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA3102R20-19PXF80

Our Catalog Part Number CA3102R20-19PX-F80 Brand Cannon Product Category Circular Product Line MIL-DTL 5015 Series I Series MIL-C-5015

Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 60/100/8 Contact Resistance Size 60/100/8

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 60/100/8

Gage

Coupling Torque Contact Retention Size 60/100/8 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter Wire Stripping Size 60/100/8

General Info

Connector with threaded coupling Box mounting receptacle Pin 20-19 3 contacts size 8 AWG Crimp Hard silver no 180°
1 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 3,0 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 80 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy

See assembly instruction

See assembly instruction
11,8 mm All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA3102R20-19PXF80 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA3102R20-19PXF80 639804