A14696-04

A14696-04 Datasheet

Part	Datasheet
A14696-04	A14696-04 (pdf)

Related Parts	Information
A14696-05	A14696-05
A14696-07	A14696-07

PDF Datasheet Preview
Laird Technologies Web site: Item # AL-52 /, Tpcm AL-52 Phase Change Material Tpcm AL-52 Phase Change Material SPECIFICATIONS Tpcm Al-52 is a thermally conductive phase change material coated on both side of aluminum foil. At temperature greater than 52°C, Tpcm Al-52 changes into a molten state and, Under low closure force, wets the heat sink and component surface to create a very thin thermal resistance interface. Tpcm Al-52 has great heat spreading characteristics and won't flow from the interface. Tpcm Al-52 has superior thermal performance comparable to the highest performing grease and phase change products available. Tpcm Al-52 is easy to handle and is a great replacement for messy grease. Tpcm Al-52 is available as individual die cut parts, kiss cut parts on rolls or sheet and uncut rolls. Tpcm Al-52 is available with or without adhesive. Color Thickness Standard Coating Thickness per side Density Shelf Life UL Flammability Rating Max. Use Temperature Phase Change Softening Temperature Thermal Impedance at 5 psi Thermal Impedance at 34.5Kpa Gray mm in in mm g/cc Indefinite 94 V0 200 ºC 52 ºC ºC-in2/W ºC-cm2/W 4/26/2011 \| Page 1 of 1

PDF Datasheet Preview

Laird Technologies Web site:

Item # AL-52 /, Tpcm AL-52 Phase Change Material

Tpcm AL-52 Phase Change Material

SPECIFICATIONS

Tpcm Al-52 is a thermally conductive phase change material coated on both side of aluminum foil. At temperature greater than 52°C, Tpcm Al-52 changes into a molten state and, Under low closure force, wets the heat sink and component surface to create a very thin thermal resistance interface. Tpcm Al-52 has great heat spreading characteristics and won't flow from the interface. Tpcm Al-52 has superior thermal performance comparable to the highest performing grease and phase change products available. Tpcm Al-52 is easy to handle and is a great replacement for messy grease. Tpcm Al-52 is available as individual die cut parts, kiss cut parts on rolls or sheet and uncut rolls. Tpcm Al-52 is available with or without adhesive.

Color Thickness

Standard Coating Thickness per side Density Shelf Life UL Flammability Rating Max. Use Temperature Phase Change Softening Temperature Thermal Impedance at 5 psi Thermal Impedance at 34.5Kpa

Gray
mm in
in mm
g/cc

Indefinite
94 V0
200 ºC
52 ºC ºC-in2/W ºC-cm2/W
4/26/2011 | Page 1 of 1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A14696-04 Datasheet file may be downloaded here without warranties.

Datasheet ID: A14696-04 645338