CA06EW22-21SWB02

CA06EW22-21SWB02 Datasheet


Datasheet for part number CA06EW22-21SWB02

Part Datasheet
CA06EW22-21SWB02 CA06EW22-21SWB02 CA06EW22-21SWB02 (pdf)
PDF Datasheet Preview
Datasheet for part number CA06EW22-21SWB02

Our Catalog Part Number CA06EW22-21SWB-02 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet Bayonet Shell Style

Endbell Style

Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 15/15S/16/16S Contact Rating at +20 °C 68 °F Size 500/0 Contact Resistance Size 15/15S/16/16S Contact Resistance Size 500/0

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 15/15S/16/16S Sep. Force per Contact Size 500/0

Gage

Coupling Torque Contact Retention Size 15/15S/16/16S Contact Retention Size 500/0 Shell Material

Shell Plating

Insulator and Grommet Material Contact Material

Harnessing Info Contact Cross-Section

Specifications and dimensions subject to change.

Connector with bayonet coupling Plug, straight Connector with spring washer, endbell for heatshrink with cable clamp and bushing Socket 22-21 1 contact size 0, 2 contact size 16 AWG Crimp Hard silver not assembled, packed separately no 80°
245 A
6 mΩ
0,2 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 and IP68 1 bar pressure after 12 hrs acc. to DIN 40 050 500 hours salt spray resistant 500 min
1,0 N
8,5 N For infos on Gage please see catalog VG95234, part 1 Closing 11 Nm max / Opening 0,8 Nm min
95 N Aluminium alloy Olive drab chromate over cadmium plating conductive CR-Elastomere Copper alloy

See assembly instruction

Datasheet for part number CA06EW22-21SWB02

Our Catalog Part Number CA06EW22-21SWB-02 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet

Harnessing Info Insulator Diameter

Wire Stripping Size 15/15S/16/16S Wire Stripping Size 500/0

General Info

See assembly instruction
6,2 mm
13,7 mm All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.
More datasheets: JW030B1-M | JW030B-M | JW030F1-M | MAX1729EVKIT | DDMAM50PK87 | PTG.M0.6NL.LC65N | DDMG50PPK87 | 1731120050 | APTGF25DSK120T3G | DBMC-17H2P-J-K127


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA06EW22-21SWB02 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA06EW22-21SWB02 639467