JW030B-M

JW030B-M Datasheet

JW030-Series Power Modules 36 Vdc to 75 Vdc Inputs 30 W

Part	Datasheet
JW030B-M	JW030B-M (pdf)

Related Parts	Information
JW030A1-M	JW030A1-M
JW030F-M	JW030F-M
JW030A8-M	JW030A8-M
JW030A-M	JW030A-M
JW030B1-M	JW030B1-M
JW030F1-M	JW030F1-M

PDF Datasheet Preview
Data Sheet March 26, 2008 JW030-Series Power Modules 36 Vdc to 75 Vdc Inputs 30 W The JW030-Series Power Modules use advanced, surfacemount technology and deliver high-quality, compact, dc-dc conversion at an economical price. Options n Heat sinks available for extended operation n Choice of remote on/off logic configuration n Short pins mm ± mm in. ± in. n Short pins mm ± mm in. ± in. n Small size mm x mm x mm in. x in. x in. n Low output noise n Constant frequency n Industry-standard pinout n Metal case n Case ground pin n 2:1 input voltage range n High efficiency 83% typical n Overcurrent protection n Remote on/off n Remote sense n Adjustable output voltage 80% to 110% of VO, nom n Output overvoltage protection n UL* 1950 Recognized, CSA† C22.2 No. 950-95 Certified, VDE 0805 EN60950, IEC950 Licensed n CE mark meets 73/23/EEC and 93/68/EEC n Within FCC Class A radiated limits n Distributed power architectures n Communications equipment The JW030-Series Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide precisely regulated outputs. The outputs are isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings of up to 30 W at a typical full-load efficiency of up to These power modules feature remote on/off, output sense both negative and positive leads , and output voltage adjustment, which allows output voltage adjustment from 80% to 110% for the JW030A-M, D-M, F-M, G-M and 60% to 110% for the JW030B-M, C-M of the nominal output voltage. For disk-drive applications, the JW030B-M Power Module provides a motor-start surge current of 3 A. The modules are PC board-mountable and encapsulated in metal cases. The modules are rated to full load at 100 °C case temperature. No external filtering is required. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products. JW030-Series Power Modules 36 Vdc to 75 Vdc Inputs 30 W Data Sheet March 26, 2008 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Unit Input Voltage Continuous Operating Case Temperature See Thermal Considerations section. Storage Temperature Tstg I/O Isolation Voltage Continuous Transient 1500 Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Table Input Specifications Parameter Operating Input Voltage Maximum Input Current VI = 0 V to 75 V IO = IO, max see Figure Inrush Transient Input Reflected-ripple Current, Peak-to-peak 5 Hz to 20 MHz, 12 µH source impedance TC = 25 °C see Figure 20 and Design Considerations section. Input Ripple Rejection 120 Hz Unit II, max mAp-p Fusing Considerations CAUTION This power module is not internally fused. An input line fuse must always be used. This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a normal-blow fuse with a maximum rating of 5 A see Safety Considerations section . Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data for further information. Lineage Power Ordering Information Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability. Table Device Codes Input Voltage 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V Output Voltage 2V V 5V 12 V 15 V 2V V 5V 12 V 15 V Output Power 13 W 30 W 30 W 30 W 30 W 13 W 30 W 30 W 30 W 30 W Remote On/ Off Logic Negative Positive Device Code JW030D1-M JW030G1-M JW030F1-M JW030A1-M JW030B1-M JW030C1-M JW030D-M JW030G-M JW030F-M JW030A-M JW030B-M JW030C-M Comcode 107670259 108448259 107587859 107587776 107587818 107587834 107587842 TBD 107600546 107584278 107587800 107587826 Table Device Options Option Short pins mm ± mm in. ± in. Short pins mm ± mm in. ± in. Device Code Suffix 6 Lineage Power JW030-Series Power Modules 36 Vdc to 75 Vdc Inputs 30 W Ordering Information continued Table Device Accessories Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws Note Dimensions are in millimeters and inches . 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. Data Sheet March 26, 2008 Comcode 407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. D000-c.cvs Figure Longitudinal Heat Sink Figure Transverse Heat Sink D000-d.cvs A sia-Pacific Head qu art er s T el +65 6 41 6 4283 Wor ld W ide Headq u ar ter s Lin eag e Po wer Co rp or atio n 30 00 Sk yline D riv e, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower .co m e-m ail tech sup por lin ea gep ower .co m Eu ro pe, M id dle-East an d Afr ic a He ad qu ar ter s T el +49 8 9 6089 286 Ind ia Head qu arter s T el +91 8 0 28411633 Lineage Power reserves the right to m ake changes to the produc t s or inform ation contained herein without notice. No liability is ass um ed as a res ult of their use or applic ation. No rights under any patent acc om pany the sale of any s uc h pr oduct s or information. 2008 Lineage Power Corpor ation, M esquite, Texas All International Rights Res er ved. March 2008 DS98-266EPS Replaces DS98-265EPS

PDF Datasheet Preview

Data Sheet March 26, 2008

JW030-Series Power Modules 36 Vdc to 75 Vdc Inputs 30 W

The JW030-Series Power Modules use advanced, surfacemount technology and deliver high-quality, compact, dc-dc conversion at an economical price.

Options
n Heat sinks available for extended operation n Choice of remote on/off logic configuration n Short pins mm ± mm
in. ± in. n Short pins mm ± mm
in. ± in.
n Small size mm x mm x mm in. x in. x in.
n Low output noise n Constant frequency n Industry-standard pinout n Metal case n Case ground pin n 2:1 input voltage range n High efficiency 83% typical n Overcurrent protection n Remote on/off n Remote sense n Adjustable output voltage 80% to 110% of VO, nom n Output overvoltage protection n UL* 1950 Recognized, CSA† C22.2 No. 950-95

Certified, VDE 0805 EN60950, IEC950 Licensed n CE mark meets 73/23/EEC and 93/68/EEC
n Within FCC Class A radiated limits
n Distributed power architectures n Communications equipment

The JW030-Series Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide precisely regulated outputs. The outputs are isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings of up to 30 W at a typical full-load efficiency of up to

These power modules feature remote on/off, output sense both negative and positive leads , and output voltage adjustment, which allows output voltage adjustment from 80% to 110% for the JW030A-M, D-M, F-M, G-M and 60% to 110% for the JW030B-M, C-M of the nominal output voltage. For disk-drive applications, the JW030B-M Power Module provides a motor-start surge current of 3 A. The modules are PC board-mountable and encapsulated in metal cases. The modules are rated to full load at 100 °C case temperature. No external filtering is required.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should
be followed. The CE mark is placed on selected products.

JW030-Series Power Modules 36 Vdc to 75 Vdc Inputs 30 W

Data Sheet March 26, 2008

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter

Unit

Input Voltage Continuous

Operating Case Temperature See Thermal Considerations section.

Storage Temperature

Tstg

I/O Isolation Voltage Continuous Transient
1500

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Table Input Specifications

Parameter Operating Input Voltage Maximum Input Current

VI = 0 V to 75 V IO = IO, max see Figure Inrush Transient Input Reflected-ripple Current, Peak-to-peak
5 Hz to 20 MHz, 12 µH source impedance TC = 25 °C see Figure 20 and Design Considerations section. Input Ripple Rejection 120 Hz

Unit

II, max
mAp-p

Fusing Considerations

CAUTION This power module is not internally fused. An input line fuse must always be used.

This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a normal-blow fuse with a maximum rating of 5 A see Safety Considerations section . Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data for further information.

Lineage Power
Ordering Information

Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability.

Table Device Codes

Input Voltage
48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V

Output Voltage
2V V 5V 12 V 15 V 2V V 5V 12 V 15 V

Output Power 13 W 30 W 30 W 30 W 30 W 13 W 30 W 30 W 30 W 30 W

Remote On/ Off Logic Negative Positive

Device Code JW030D1-M JW030G1-M JW030F1-M JW030A1-M JW030B1-M JW030C1-M JW030D-M JW030G-M JW030F-M JW030A-M JW030B-M JW030C-M

Comcode
107670259 108448259 107587859 107587776 107587818 107587834 107587842

TBD 107600546 107584278 107587800 107587826

Table Device Options

Option Short pins mm ± mm
in. ± in. Short pins mm ± mm
in. ± in.

Device Code Suffix 6

Lineage Power

JW030-Series Power Modules 36 Vdc to 75 Vdc Inputs 30 W
Ordering Information continued

Table Device Accessories Accessory
1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws
1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws

Note Dimensions are in millimeters and inches .
1/4 IN.
1/2 IN.
1 IN.
1/2 IN.

Data Sheet March 26, 2008

Comcode
407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.

D000-c.cvs

Figure Longitudinal Heat Sink

Figure Transverse Heat Sink

D000-d.cvs

A sia-Pacific Head qu art er s T el +65 6 41 6 4283

Wor ld W ide Headq u ar ter s

Lin eag e Po wer Co rp or atio n 30 00 Sk yline D riv e, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626
ag ep ower .co m e-m ail tech sup por lin ea gep ower .co m

Eu ro pe, M id dle-East an d Afr ic a He ad qu ar ter s T el +49 8 9 6089 286

Ind ia Head qu arter s T el +91 8 0 28411633

Lineage Power reserves the right to m ake changes to the produc t s or inform ation contained herein without notice. No liability is ass um ed as a res ult of their use or applic ation. No rights under any patent acc om pany the sale of any s uc h pr oduct s or information.
2008 Lineage Power Corpor ation, M esquite, Texas All International Rights Res er ved.

March 2008 DS98-266EPS Replaces DS98-265EPS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JW030B-M Datasheet file may be downloaded here without warranties.

Datasheet ID: JW030B-M 645689