CA02R16-11PF80F0

CA02R16-11PF80F0 Datasheet

Datasheet for part number CA02R16-11PF80F0

Part	Datasheet
CA02R16-11PF80F0	CA02R16-11PF80F0 (pdf)

PDF Datasheet Preview
Datasheet for part number CA02R16-11PF80F0 Our Catalog Part Number CA02R16-11P-F80-F0 Brand Cannon Product Category Circular Product Line MIL-DTL 5015 Series I Series MIL-C-5015 Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts included Shielding Contact Rating at +20 °C 68 °F Size 25/12 Contact Resistance Size 25/12 Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 25/12 Gage Coupling Torque Contact Retention Size 25/12 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 25/12 General Info Connector with threaded coupling Box mounting receptacle Pin 16-11 2 contacts size 12 AWG Crimp Hard silver no, delivery without contacts no 3 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 1,5 N For infos on Gage please see catalog VG95234, part 1 Closing 5,5 Nm max / Opening 0,46 Nm min 55 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy See assembly instruction See assembly instruction 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA02R16-11PF80F0

Our Catalog Part Number CA02R16-11P-F80-F0 Brand Cannon Product Category Circular Product Line MIL-DTL 5015 Series I Series MIL-C-5015

Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts included Shielding Contact Rating at +20 °C 68 °F Size 25/12 Contact Resistance Size 25/12

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 25/12

Gage

Coupling Torque Contact Retention Size 25/12 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter Wire Stripping Size 25/12

General Info

Connector with threaded coupling Box mounting receptacle Pin 16-11 2 contacts size 12 AWG Crimp Hard silver no, delivery without contacts no
3 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 1,5 N For infos on Gage please see catalog VG95234, part 1 Closing 5,5 Nm max / Opening 0,46 Nm min 55 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy

See assembly instruction

See assembly instruction
6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA02R16-11PF80F0 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA02R16-11PF80F0 639438