ISL37231DRAZ-T7

ISL37231DRAZ-T7 Datasheet

ISL37231

Part	Datasheet
ISL37231DRAZ-T7	ISL37231DRAZ-T7 (pdf)

Related Parts	Information
ISL37231DRAZ-TS	ISL37231DRAZ-TS
ISL37231DRAZ	ISL37231DRAZ

PDF Datasheet Preview
Gb/s Retiming Dual-Channel Transceiver ISL37231 The ISL37231 is an advanced dual-channel, dual-simplex retimer for active copper cable applications. Endowed with sophisticated functions, such as media optimized PCB or Cable and adaptive equalization, de-emphasis, and signal retiming, this IC fortifies sensitive links that break with lesser retiming solutions. The device contains high performance mixed signal processing technology to provide a maximally robust signal integrity solution for datacenter and consumer applications. Such processing includes up to 25dB of media-optimized equalization and versatile retiming capabilities to reset link jitter budgets. The ISL37231 provides this high level of performance while significantly reducing power consumption relative to other active cable solutions. At well below 500mW, the operating power is the lowest in class, and a sleep mode function can be invoked to reduce the power to a miniscule 3mW. To facilitate ease of system integration, the ISL37231 provides advanced diagnostic capabilities in the form of loopback and high-resolution on-chip eye monitor functions, both accessed via a UART interface. The ISL37231 is optimized to work in conjunction with the ISL80083 power management IC, however, it will also operate with appropriate discrete components voltage regulators and a 33Mhz crystal oscillator . • Industry’s lowest power and highest performance 10.3125Gbps active cable solution for STP and twin-axial cables • Supports 64b/66b encoding • Fully retimed low jitter outputs • Up to 16.5dB of adjustable or adaptive receiver-side equalization • 9dB output de-emphasis • Supports independent SSC on each channel • On-chip microcontroller and eye monitor • Multiple loopback modes • Low power <420mW operation with 3mW sleep mode • Ultra-small 5mmx5mm aQFN package • Thunderbolt active cables • Proprietary high-speed active cable assemblies • Thinner gauge cable • Extends cable reach • Improved BER TX1 RX1 TX2 RX2 GND CABLE CONNECTOR ISL37231 AI1 EQ CDR DE BO1 DE CDR EQ BI1 AI2 EQ CDR DE AO2 BO2 DE CDR EQ BI2 ACTIVE CABLE CABLE MEDIA CABLE CONNECTOR ISL37231 BI1 EQ CDR DE BO1 AO1 DE CDR EQ AI1 BI2 EQ CDR DE BO2 AO2 DE CDR EQ AI2 RX1 TX1 RX2 TX2 GND PWR CLK RESET SDA SCL SDA RESET CLK PWR ISL80083 EEPROM EEPROM ISL80083 FIGURE TYPICAL APPLICATION January 25, 2013 FN8266.1 CAUTION These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 \| Copyright Intersil Americas LLC 2012, All Rights Reserved Intersil and design is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners. ISL37231 Ordering Information PART NUMBER Notes 2, 3 PART MARKING TEMP. RANGE °C PACKAGE Pb-free PKG. DWG. # ISL37231DRAZ-TS Note 1 ISL372 31DRAZ 0 to +85 69 Ld High Density Array aQFN package 7” 100 pcs. C69.5x5B ISL37231DRAZ-T7 Note 1 ISL372 31DRAZ 0 to +85 69 Ld High Density Array aQFN package 7” 1k pcs. C69.5x5B ISL37231DRAZ ISL372 31DRAZ 0 to +85 69 Ld High Density Array aQFN package C69.5x5B NOTES Please refer to TB347 for details on reel specifications. These Intersil Pb-free plastic packaged products employ special Pb-free material sets molding compounds/die attach materials and NiPdAu plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020 For Moisture Sensitivity Level MSL , please see device information page for ISL37231. For more information on MSL please see techbrief TB363. Pin Configuration ISL37231 69 LD aQFN TOP VIEW A42 A41 A40 A39 A38 A37 A36 A35 A34 A33 B27 B26 B25 B24 B23 B22 B21 B20 B19 A4 B2 A29 B18 A5 B3 A6 B4 EXPOSED PAD A28 B17 A27 B16 A7 B5 A26 B15 B6 B7 B8 B9 B10 B11 B12 B13 B14 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 FN8266.1 January 25, 2013 ISL37231 Pin Functions and Definitions PIN NAME AIN1[P,N]

PDF Datasheet Preview

Gb/s Retiming Dual-Channel Transceiver

ISL37231

The ISL37231 is an advanced dual-channel, dual-simplex retimer for active copper cable applications. Endowed with sophisticated functions, such as media optimized PCB or Cable and adaptive equalization, de-emphasis, and signal retiming, this IC fortifies sensitive links that break with lesser retiming solutions. The device contains high performance mixed signal processing technology to provide a maximally robust signal integrity solution for datacenter and consumer applications. Such processing includes up to 25dB of media-optimized equalization and versatile retiming capabilities to reset link jitter budgets.

The ISL37231 provides this high level of performance while significantly reducing power consumption relative to other active cable solutions. At well below 500mW, the operating power is the lowest in class, and a sleep mode function can be invoked to reduce the power to a miniscule 3mW.

To facilitate ease of system integration, the ISL37231 provides advanced diagnostic capabilities in the form of loopback and high-resolution on-chip eye monitor functions, both accessed via a UART interface.

The ISL37231 is optimized to work in conjunction with the ISL80083 power management IC, however, it will also operate with appropriate discrete components voltage regulators and a 33Mhz crystal oscillator .
• Industry’s lowest power and highest performance 10.3125Gbps active cable solution for STP and twin-axial cables
• Supports 64b/66b encoding
• Fully retimed low jitter outputs
• Up to 16.5dB of adjustable or adaptive receiver-side
equalization
• 9dB output de-emphasis
• Supports independent SSC on each channel
• On-chip microcontroller and eye monitor
• Multiple loopback modes
• Low power <420mW operation with 3mW sleep mode
• Ultra-small 5mmx5mm aQFN package
• Thunderbolt active cables
• Proprietary high-speed active cable assemblies
• Thinner gauge cable
• Extends cable reach
• Improved BER

TX1 RX1 TX2 RX2 GND

CABLE CONNECTOR

ISL37231 AI1 EQ CDR DE

BO1 DE CDR EQ BI1

AI2 EQ CDR DE AO2

BO2 DE CDR EQ BI2

ACTIVE CABLE

CABLE MEDIA

CABLE CONNECTOR ISL37231

BI1 EQ CDR DE BO1 AO1 DE CDR EQ AI1

BI2 EQ CDR DE BO2 AO2 DE CDR EQ AI2

RX1 TX1 RX2 TX2 GND

PWR CLK RESET

SDA SCL SDA RESET CLK PWR

ISL80083

EEPROM

EEPROM

ISL80083

FIGURE TYPICAL APPLICATION

January 25, 2013

FN8266.1

CAUTION These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2012, All Rights Reserved

Intersil and design is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners.

ISL37231
Ordering Information

PART NUMBER Notes 2, 3

PART MARKING

TEMP. RANGE °C

PACKAGE Pb-free

PKG. DWG. #

ISL37231DRAZ-TS Note 1 ISL372 31DRAZ
0 to +85
69 Ld High Density Array aQFN package 7” 100 pcs.

C69.5x5B

ISL37231DRAZ-T7 Note 1 ISL372 31DRAZ
0 to +85
69 Ld High Density Array aQFN package 7” 1k pcs.

C69.5x5B

ISL37231DRAZ

ISL372 31DRAZ
0 to +85
69 Ld High Density Array aQFN package

C69.5x5B

NOTES Please refer to TB347 for details on reel specifications. These Intersil Pb-free plastic packaged products employ special Pb-free material sets molding compounds/die attach materials and NiPdAu plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020 For Moisture Sensitivity Level MSL , please see device information page for ISL37231. For more information on MSL please see techbrief TB363.

Pin Configuration

ISL37231 69 LD aQFN

TOP VIEW

A42 A41 A40 A39 A38 A37 A36 A35 A34 A33

B27 B26 B25 B24 B23 B22 B21 B20 B19

A4 B2

A29 B18

A5 B3

A6 B4

EXPOSED PAD

A28 B17

A27 B16

A7 B5

A26 B15

B6 B7 B8 B9 B10 B11 B12 B13 B14

A12 A13 A14 A15 A16 A17 A18 A19 A20 A21

FN8266.1

January 25, 2013

ISL37231

Pin Functions and Definitions

PIN NAME AIN1[P,N]

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ISL37231DRAZ-T7 Datasheet file may be downloaded here without warranties.

Datasheet ID: ISL37231DRAZ-T7 639158