IDTVLX1000BKG

IDTVLX1000BKG Datasheet

The IDT PanelPort LinkXtend is a DisplayPort -based solution that provides not only and re-drive, but also signal cleaning, signal reconditioning and signal renewing in extended cable links for PC and mobile computers to remote monitors. The device is the solution to provide jitter clean up and full link layer repeat functionality in a single chip. The single four-lane input/single four-lane output device can be connected serially to provide extended cable length, offering an affordable solution for challenging enterprise environments. The IDT PanelPort LinkXtend can also be implemented on a PC board to repair long trace routing signal degradation or board routing.

Part	Datasheet
IDTVLX1000BKG	IDTVLX1000BKG (pdf)

PDF Datasheet Preview
semiconductor solutions VLX1000 PanelPort LinkXtend PanelPort technology enables the link extender chip to provide “true signal quality” end to end, when transmitting display signals over long distances and board layouts. Applications for VLX1000 PanelPort LinkXtend 4ELECOMMUNICATIONS The IDT PanelPort LinkXtend is a DisplayPort -based solution that provides not only and re-drive, but also signal cleaning, signal reconditioning and signal renewing in extended cable links for PC and mobile computers to remote monitors. The device is the solution to provide jitter clean up and full link layer repeat functionality in a single chip. The single four-lane input/single four-lane output device can be connected serially to provide extended cable length, offering an affordable solution for challenging enterprise environments. The IDT PanelPort LinkXtend can also be implemented on a PC board to repair long trace routing signal degradation or board routing. Available in an 81-pin BGA, this and feature-rich device extends the DisplayPort-based applications to include telecommunications, industrial and cable adapter markets. In these environments, a major concern is the transmission of signals over long distances without repeating or amplifying noise to the signal. The PanelPort LinkXtend reconditions and reestablishes the signal while resetting the jitter budget to provide end-signal quality equal to the source. and features of IDT LinkXtend Clean, accurate signal from PC to monitor or source to sink device PHY layer and full protocol link layer repeat with jitter clean up GHz x 4 lanes, total Gbps bandwidth that supports maximum 2560 x 1600 pixel resolution Extended cable links LinkXtend adapters can be connected serially to provide signal to distant receivers Design on the PC motherboard or in a separate dongle interoperability and Full Hollywood content security support secured data from down to upstream Improves ecosystem for DisplayPort-enabled applications solution that doesn’t just amplify the noise to improve eye, but instead it resets the jitter budget power enables “Green” system designs No AC adapter required for dongles power capability through the use of the DisplayPort standard Full protocol Link Layer repeat and reconditions the signal noise and jitter full PHY, Link and Protocol layer enablement VLX1000 LINK EXTEND FLYER 1 DisplayPort IN VLX1000 FFuullllLLiinnkk LLaayyeerr RReeppeeaatt PPHHYY LLaayyeerr Rx/Tx Rx/Tx DisplayPort OUT Computer Display OR VLX1000 DP Connector VLX1000 DP Connector Projector OR DTV OR Digital Signage Figure IDT VLX1000 Complete re-drive, recondition and jitter clean up for long cable distance applications. 2009 Integrated Device Technology, Inc. All rights reserved. Product subject to change without notice. IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA 1-10/MG/BWD/DC/PDF/r5_v1 FLYR- LINKX -0110

PDF Datasheet Preview

semiconductor solutions

VLX1000 PanelPort LinkXtend

PanelPort technology enables the link extender chip to provide “true signal quality” end to end, when transmitting display signals over long distances and board layouts.

Applications for VLX1000 PanelPort LinkXtend
4ELECOMMUNICATIONS

The IDT PanelPort LinkXtend is a DisplayPort -based solution that provides not only and re-drive, but also signal cleaning, signal reconditioning and signal renewing in extended cable links for PC and mobile computers to remote monitors. The device is the solution to provide jitter clean up and full link layer repeat functionality in a single chip. The single four-lane input/single four-lane output device can be connected serially to provide extended cable length, offering an affordable solution for challenging enterprise environments. The IDT PanelPort LinkXtend can also be implemented on a PC board to repair long trace routing signal degradation or board routing.

Available in an 81-pin BGA, this and feature-rich device extends the DisplayPort-based applications to include telecommunications, industrial and cable adapter markets. In these environments, a major concern is the transmission of signals over long distances without repeating or amplifying noise to the signal. The PanelPort LinkXtend reconditions and reestablishes the signal while resetting the jitter budget to provide end-signal quality equal to the source.
and features of IDT LinkXtend

Clean, accurate signal from PC to monitor or source to sink device PHY layer and full protocol link layer repeat with jitter clean up GHz x 4 lanes, total Gbps bandwidth that supports maximum 2560 x 1600 pixel resolution

Extended cable links LinkXtend adapters can be connected serially to provide signal to distant receivers

Design on the PC motherboard or in a separate dongle interoperability and

Full Hollywood content security support secured data from down to upstream

Improves ecosystem for DisplayPort-enabled applications solution that doesn’t just amplify the noise to improve eye, but instead it resets the jitter budget power enables “Green” system designs

No AC adapter required for dongles power capability through the use of the DisplayPort standard

Full protocol Link Layer repeat and reconditions the signal noise and jitter full PHY, Link and Protocol layer enablement

VLX1000 LINK EXTEND FLYER 1

DisplayPort IN

VLX1000

FFuullllLLiinnkk LLaayyeerr RReeppeeaatt

PPHHYY LLaayyeerr Rx/Tx Rx/Tx

DisplayPort OUT

Computer Display OR

VLX1000

DP Connector

VLX1000

DP Connector

Projector OR

DTV OR

Digital Signage

Figure IDT VLX1000 Complete re-drive, recondition and jitter clean up for long cable distance applications.
2009 Integrated Device Technology, Inc. All rights reserved. Product subject to change without notice. IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.

Printed in USA 1-10/MG/BWD/DC/PDF/r5_v1

FLYR- LINKX -0110

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IDTVLX1000BKG Datasheet file may be downloaded here without warranties.

Datasheet ID: IDTVLX1000BKG 637541