MK3805RITR

MK3805RITR Datasheet

MK3805

Part	Datasheet
MK3805RITR	MK3805RITR (pdf)

Related Parts	Information
MK3805RI	MK3805RI

PDF Datasheet Preview
BUFFER/CLOCK DRIVER DATASHEET MK3805 The MK3805 is a non-inverting clock driver/buffer providing two independent banks of four outputs each. These buffers have a tri-state output enable input active low with 1-input, 5-output configuration per group. The skew between the outputs of the same package is ns and the skew between the outputs of different packages is ns. The maximum input to output delay is ns. • Packaged in 20-pin SSOP • Available in Pb lead free package • Five outputs for each bank with one clock input • Two separate banks of five outputs each • Advanced, low-power, CMOS process • Ten output clocks • Two separate inputs • Industrial temperature range -40° C to +85° C • Hysteresis on all inputs NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram OEA INA OEB INB VDD 2 3 GND 5 OA0-4 5 OB0-4 MON IDT / ICS BUFFER/CLOCK DRIVER MK3805 MK3805 BUFFER/CLOCK DRIVER FAN OUT BUFFER Pin Assignment 20 pin 150 mil SSOP/20 pin 300mil SOIC Truth Table Inputs OEA, OEB INA, INB Outputs OAN, OBN Pin Descriptions Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pin Name VCC OA0 OA1 OA2 GND OA3 OA4 GND OEA INA INB OEB MON OB4 OB3 GND OB2 OB1 OB0 VCC Pin Type Power Output Power Output Power Input Output Power Output Power Pin Description Connect to V. Clock output. Clock output. Clock output. Connect to ground. Clock output. Clock output. Connect to ground. Tri state output enable input active low . Clock input. Clock input. Tri state output enable input active low . Monitor output. Clock output. Clock output. Connect to ground. Clock output. Clock output. Clock output. Connect to V. IDT / ICS BUFFER/CLOCK DRIVER MK3805 MK3805 BUFFER/CLOCK DRIVER FAN OUT BUFFER External Components The MK3805 requires a minimum number of external components for proper operation. Decoupling Capacitors Decoupling capacitors of 0.01µF must be connected between VDD and GND, as close to these pins as possible. For optimum device performance, the decoupling capacitors should be mounted on the component side of the PCB. Avoid the use of vias in the decoupling circuit. Series Termination Resistor Ordering Information SEATING PLANE Part / Order Number MK3805RI* MK3805RITR* MK3805RILF MK3805RILFTR Marking MK3805RI MK3805RILF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP Temperature -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS BUFFER/CLOCK DRIVER MK3805 MK3805 BUFFER/CLOCK DRIVER FAN OUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

BUFFER/CLOCK DRIVER

DATASHEET

MK3805

The MK3805 is a non-inverting clock driver/buffer providing two independent banks of four outputs each. These buffers have a tri-state output enable input active low with 1-input, 5-output configuration per group. The skew between the outputs of the same package is ns and the skew between the outputs of different packages is ns. The maximum input to output delay is ns.
• Packaged in 20-pin SSOP
• Available in Pb lead free package
• Five outputs for each bank with one clock input
• Two separate banks of five outputs each
• Advanced, low-power, CMOS process
• Ten output clocks
• Two separate inputs
• Industrial temperature range -40° C to +85° C
• Hysteresis on all inputs

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

OEA INA OEB INB

VDD 2
3 GND
5 OA0-4
5 OB0-4 MON

IDT / ICS BUFFER/CLOCK DRIVER

MK3805

MK3805 BUFFER/CLOCK DRIVER

FAN OUT BUFFER

Pin Assignment
20 pin 150 mil SSOP/20 pin 300mil SOIC

Truth Table

Inputs

OEA, OEB INA, INB

Outputs

OAN, OBN

Pin Descriptions

Pin Number
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pin Name

VCC OA0 OA1 OA2 GND OA3 OA4 GND OEA INA INB OEB MON OB4 OB3 GND OB2 OB1 OB0 VCC

Pin Type

Power Output Power Output Power Input Output Power Output Power

Pin Description

Connect to V. Clock output. Clock output. Clock output. Connect to ground. Clock output. Clock output. Connect to ground. Tri state output enable input active low . Clock input. Clock input. Tri state output enable input active low . Monitor output. Clock output. Clock output. Connect to ground. Clock output. Clock output. Clock output. Connect to V.

IDT / ICS BUFFER/CLOCK DRIVER

MK3805

MK3805 BUFFER/CLOCK DRIVER

FAN OUT BUFFER

External Components

The MK3805 requires a minimum number of external components for proper operation.

Decoupling Capacitors

Decoupling capacitors of 0.01µF must be connected between VDD and GND, as close to these pins as possible. For optimum device performance, the decoupling capacitors should be mounted on the component side of the PCB. Avoid the use of vias in the decoupling circuit.

Series Termination Resistor
Ordering Information

SEATING PLANE

Part / Order Number

MK3805RI* MK3805RITR* MK3805RILF MK3805RILFTR

Marking

MK3805RI MK3805RILF

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Package
20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP

Temperature
-40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS BUFFER/CLOCK DRIVER

MK3805

MK3805 BUFFER/CLOCK DRIVER

FAN OUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK3805RITR Datasheet file may be downloaded here without warranties.

Datasheet ID: MK3805RITR 637479