MK2308S-1H

MK2308S-1H Datasheet

MK2308-1H

Part	Datasheet
MK2308S-1H	MK2308S-1H (pdf)

Related Parts	Information
MK2308S-1HILFTR	MK2308S-1HILFTR
MK2308S-1HILF	MK2308S-1HILF
MK2308S-1HITR	MK2308S-1HITR
MK2308S-1HTR	MK2308S-1HTR
MK2308S-1HI	MK2308S-1HI

PDF Datasheet Preview
VOLT ZERO DELAY, LOW SKEW BUFFER DATASHEET MK2308-1H The MK2308-1H is a low phase noise, high-speed PLL based, 8-output, low skew zero delay buffer. Based on IDT’s proprietary low jitter Phase Locked Loop PLL techniques, the device provides eight low skew outputs at speeds up to 133 MHz at V. The outputs can be generated from the PLL for zero delay , or directly from the input for testing , and can be set to tri-state mode or to stop at a low level. For normal operation as a zero delay buffer, any output clock is tied to the FBIN pin. IDT manufactures a large variety of clock generators and buffers. • Clock outputs from 10 to 133 MHz • Zero input-output delay • Eight low skew <200 ps outputs • Device-to-device skew <700 ps • Full CMOS outputs with 25 mA output drive capability at TTL levels • 5 V tolerant FBIN and CLKIN pins • Tri-state mode for board-level testing • Advanced, low-power, sub-micron CMOS process • Operating voltage of V • Industrial temperature range available • Packaged in 16-pin SOIC and TSSOP packages • Available in Pb lead free package • Industrial and commercial temp operation NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram VDD 2 S2, S1 2 Control Logic CLKA1 CLKA2 CLKIN CLKA3 Clock FBIN Synthesis PLL CLKA4 CLKB1 CLKB2 CLKB3 CLKB4 GND 2 Feedback is shown from CLKB4 for illustration, but may come from any output. IDT / ICS VOLT ZERO DELAY, LOW SKEW BUFFER MK2308-1H VOLT ZERO DELAY, LOW SKEW BUFFER Pin Assignment CLKIN CLKA1 CLKA2 CLKB1 CLKB2 FBIN CLKA4 CLKA3 CLKB4 CLKB3 16-pin narrow 150 mil SOIC and 173 mil TSSOP Output Clock Mode Select Table Ordering Information Part / Order Number MK2308S-1H* MK2308S-1HTR* MK2308S-1HLF MK2308S-1HLFTR MK2308S-1HI* MK2308S-1HITR* MK2308G-1HI* MK2308G-1HITR* MK2308G-1HILF MK2308G-1HILFTR MK2308G-1H* MK2308G-1HTR* MK2308G-1HLF MK2308G-1HLFTR Marking MK2308S-1H MK2308S-1H MK2308S-1HLF MK2308S-1HLF MK2308S-1HI MK2308S-1HI 2308-1HI 2308-1HI 23081HIL 2308G-1H 2308G-1H 2308G1HL Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS VOLT ZERO DELAY, LOW SKEW BUFFER MK2308-1H MK2308-1H VOLT ZERO DELAY, LOW SKEW BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

VOLT ZERO DELAY, LOW SKEW BUFFER

DATASHEET

MK2308-1H

The MK2308-1H is a low phase noise, high-speed PLL based, 8-output, low skew zero delay buffer. Based on IDT’s proprietary low jitter Phase Locked Loop PLL techniques, the device provides eight low skew outputs at speeds up to 133 MHz at V. The outputs can be generated from the PLL for zero delay , or directly from the input for testing , and can be set to tri-state mode or to stop at a low level. For normal operation as a zero delay buffer, any output clock is tied to the FBIN pin.

IDT manufactures a large variety of clock generators and buffers.
• Clock outputs from 10 to 133 MHz
• Zero input-output delay
• Eight low skew <200 ps outputs
• Device-to-device skew <700 ps
• Full CMOS outputs with 25 mA output drive capability at

TTL levels
• 5 V tolerant FBIN and CLKIN pins
• Tri-state mode for board-level testing
• Advanced, low-power, sub-micron CMOS process
• Operating voltage of V
• Industrial temperature range available
• Packaged in 16-pin SOIC and TSSOP packages
• Available in Pb lead free package
• Industrial and commercial temp operation

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

VDD 2

S2, S1 2

Control Logic

CLKA1

CLKA2

CLKIN

CLKA3

Clock

FBIN

Synthesis PLL

CLKA4 CLKB1

CLKB2

CLKB3

CLKB4

GND 2

Feedback is shown from CLKB4 for illustration, but may come from any output.

IDT / ICS VOLT ZERO DELAY, LOW SKEW BUFFER

MK2308-1H VOLT ZERO DELAY, LOW SKEW BUFFER

Pin Assignment

CLKIN

CLKA1

CLKA2

CLKB1

CLKB2

FBIN

CLKA4

CLKA3

CLKB4

CLKB3
16-pin narrow 150 mil SOIC and 173 mil TSSOP

Output Clock Mode Select Table
Ordering Information

Part / Order Number

MK2308S-1H* MK2308S-1HTR* MK2308S-1HLF MK2308S-1HLFTR

MK2308S-1HI* MK2308S-1HITR*

MK2308G-1HI* MK2308G-1HITR* MK2308G-1HILF MK2308G-1HILFTR

MK2308G-1H* MK2308G-1HTR* MK2308G-1HLF MK2308G-1HLFTR

Marking

MK2308S-1H MK2308S-1H MK2308S-1HLF MK2308S-1HLF MK2308S-1HI MK2308S-1HI
2308-1HI 2308-1HI 23081HIL 2308G-1H 2308G-1H 2308G1HL

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS VOLT ZERO DELAY, LOW SKEW BUFFER

MK2308-1H

MK2308-1H VOLT ZERO DELAY, LOW SKEW BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK2308S-1H Datasheet file may be downloaded here without warranties.

Datasheet ID: MK2308S-1H 637458