HFD3081-108

HFD3081-108 Datasheet

SW Detector 2Gbps, PIN+Pre-amp, TO-46 HFD3081-108

Part	Datasheet
HFD3081-108	HFD3081-108 (pdf)

Related Parts	Information
HFD3081-108-XBA	HFD3081-108-XBA

PDF Datasheet Preview
Finisar Product Specification SW Detector 2Gbps, PIN+Pre-amp, TO-46 HFD3081-108 PRODUCT FEATURES • Low electrical parasitic TO-46 package • High performance GaAs PIN photodiode with separate transimpedance amplifier • Low electrical parasitic TO46 package • Data rates from 155Mbps to 2.5Gbps • Low bias currents and voltages The HFD3081-108 use a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 2.5Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols PRODUCT SELECTION Part Number HFD3081-108 Description Detector, 4 pin TO-46, rated for 1G and 2G applications Confidential and Proprietary 2012 Finisar Corporation. All rights reserved HFD3081-108 Product Specification April 2013 Finisar I. Absolute Maximum Ratings Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power ESD Exposure Human Body Model Rating -40 to +85°C -40* to +85°C 260°C, 10 sec. -0.5V to 4V +3 dBm average, +6 dBm peak 225V1 Notice Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge ESD . To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Confidential and Proprietary 2012 Finisar Corporation. All rights reserved HFD3081-108 Product Specification April 2013 Finisar II. Electro-Optical Characteristics 3.0V<Vcc<3.6V, AC coupled to 50Ω 100Ω differential , -40°C<T<85°C unless otherwise specified Parameters Data Rate Supply Voltage Supply Current Input Optical Wavelength Maximum Average Input Power before Overload Differential Output Voltage Swing Differential Responsivity -3dB Optical/Electrical Bandwidth Test Condition PR =0uW, RL=50ΩAC coupled 0oC to 70oC PR,OMA= -12Bm, AC Coupled to RL=50Ω PR,OMA = -12dBm, AC Coupled to RL=50Ω PR,OMA =-12dBm Min. Typ. Max.

PDF Datasheet Preview

Finisar

Product Specification

SW Detector 2Gbps, PIN+Pre-amp, TO-46 HFD3081-108

PRODUCT FEATURES
• Low electrical parasitic TO-46 package
• High performance GaAs PIN photodiode with separate transimpedance amplifier
• Low electrical parasitic TO46 package
• Data rates from 155Mbps to 2.5Gbps
• Low bias currents and voltages

The HFD3081-108 use a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 2.5Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols

PRODUCT SELECTION

Part Number HFD3081-108

Description Detector, 4 pin TO-46, rated for 1G and 2G applications

Confidential and Proprietary 2012 Finisar Corporation. All rights reserved

HFD3081-108

Product Specification April 2013

Finisar

I. Absolute Maximum Ratings

Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power ESD Exposure Human Body Model

Rating -40 to +85°C -40* to +85°C 260°C, 10 sec. -0.5V to 4V +3 dBm average, +6 dBm peak 225V1

Notice

Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability.

Notice

The inherent design of this component causes it to be sensitive to electrostatic discharge ESD . To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product

Confidential and Proprietary 2012 Finisar Corporation. All rights reserved

HFD3081-108

Product Specification April 2013

Finisar

II. Electro-Optical Characteristics
3.0V<Vcc<3.6V, AC coupled to 50Ω 100Ω differential , -40°C<T<85°C unless otherwise specified

Parameters

Data Rate Supply Voltage Supply Current

Input Optical Wavelength Maximum Average Input Power before Overload Differential Output Voltage Swing

Differential Responsivity
-3dB Optical/Electrical Bandwidth

Test Condition

PR =0uW, RL=50ΩAC coupled 0oC to 70oC

PR,OMA= -12Bm, AC Coupled to RL=50Ω PR,OMA = -12dBm, AC Coupled to RL=50Ω PR,OMA =-12dBm

Min.

Typ.

Max.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HFD3081-108 Datasheet file may be downloaded here without warranties.

Datasheet ID: HFD3081-108 636460