IDT74FCT20807PYI8

IDT74FCT20807PYI8 Datasheet

IDT74FCT20807 2.5V CMOS 1-TO-10 CLOCK DRIVER

Part	Datasheet
IDT74FCT20807PYI8	IDT74FCT20807PYI8 (pdf)

Related Parts	Information
IDT74FCT20807QI	IDT74FCT20807QI
IDT74FCT20807QI8	IDT74FCT20807QI8
IDT74FCT20807PYI	IDT74FCT20807PYI

PDF Datasheet Preview
IDT74FCT20807 2.5V CMOS 1-TO-10 CLOCK DRIVER 2.5V CMOS 1-TO-10 CLOCK DRIVER INDUSTRIAL TEMPERATURE RANGE IDT74FCT20807 FEATURES: • High frequency > 150MHz • Guaranteed low skew < 150ps max. between any two outputs • Very low duty cycle distortion < 300ps • High speed propagation delay < 3ns • Very low CMOS power levels • TTL compatible inputs and outputs • 1:10 fanout • Maximum output rise and fall time < 1.25ns max. • Low input capacitance 3pF typical • 2.5V supply voltage • Available in SSOP and QSOP packages DESCRIPTION: The FCT20807 is a 2.5V compatible, high speed, low noise, 1:10 fanout, non-inverting clock buffer. The large fanout from a single input reduces loading on the preceding driver and provides an efficient clock distribution network. Providing output to output skew as low as 150ps, the FCT20807 is an ideal clock distribution device for synchronous systems. Multiple power and grounds reduce noise. Typical applications are clock and signal distribution. NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 FUNCTIONAL BLOCK DIAGRAM PIN CONFIGURATION SSOP/ QSOP TOP VIEW The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE 1 c 2005 Integrated Device Technology, Inc. DECEMBER 2009NOTE EOL for non-green parts to occur on 5/13/ DSC - 6171/14 10 per PDN U-09-01 IDT74FCT20807 2.5V CMOS 1-TO-10 CLOCK DRIVER INDUSTRIAL TEMPERATURE RANGE ABSOLUTE MAXIMUM RATINGS 1 CAPACITANCE TA = +25OC, f = 1.0MHz Symbol Description Unit Symbol Parameter 1 Conditions Typ. Max. Unit VTERM 2 Terminal Voltage with Respect to GND to V Input Capacitance VIN = 0V VTERM 3 Terminal Voltage with Respect to GND to V COUT OutputCapacitance VOUT = 0V VTERM 4 TSTG Terminal Voltage with Respect to GND to VCC+0.5 V Storage Temperature to +150 °C NOTE This parameter is measured at characterization but not tested. IOUT DC Output Current to +60 mA Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation ORDERING INFORMATION IDT74FCT XXXX Device Type Package X Temp. Range INDUSTRIAL TEMPERATURE RANGE Industrial -40°C to +85°C Shrink Small Outline IC Quarter-size Small Outline IC QSOP - Green 20807 1-to-10 2.5V Clock Driver NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138 for SALES 800-345-7015 or 408-284-8200 fax 408-284-2775 for Tech Support:

PDF Datasheet Preview

IDT74FCT20807 2.5V CMOS 1-TO-10 CLOCK DRIVER
2.5V CMOS 1-TO-10 CLOCK DRIVER

INDUSTRIAL TEMPERATURE RANGE

IDT74FCT20807

FEATURES:
• High frequency > 150MHz
• Guaranteed low skew < 150ps max. between any two outputs
• Very low duty cycle distortion < 300ps
• High speed propagation delay < 3ns
• Very low CMOS power levels
• TTL compatible inputs and outputs
• 1:10 fanout
• Maximum output rise and fall time < 1.25ns max.
• Low input capacitance 3pF typical
• 2.5V supply voltage
• Available in SSOP and QSOP packages

DESCRIPTION:

The FCT20807 is a 2.5V compatible, high speed, low noise, 1:10 fanout, non-inverting clock buffer. The large fanout from a single input reduces loading on the preceding driver and provides an efficient clock distribution network. Providing output to output skew as low as 150ps, the FCT20807 is an ideal clock distribution device for synchronous systems. Multiple power and grounds reduce noise. Typical applications are clock and signal distribution.

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

FUNCTIONAL BLOCK DIAGRAM

PIN CONFIGURATION

SSOP/ QSOP

TOP VIEW

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

INDUSTRIAL TEMPERATURE RANGE 1
c 2005 Integrated Device Technology, Inc.

DECEMBER 2009NOTE EOL for non-green parts to occur on 5/13/

DSC - 6171/14
10 per PDN U-09-01

IDT74FCT20807 2.5V CMOS 1-TO-10 CLOCK DRIVER

INDUSTRIAL TEMPERATURE RANGE

ABSOLUTE MAXIMUM RATINGS 1

CAPACITANCE TA = +25OC, f = 1.0MHz

Symbol Description

Unit Symbol Parameter 1

Conditions Typ. Max. Unit

VTERM 2 Terminal Voltage with Respect to GND to V

Input Capacitance

VIN = 0V

VTERM 3 Terminal Voltage with Respect to GND to V

COUT

OutputCapacitance VOUT = 0V

VTERM 4 TSTG

Terminal Voltage with Respect to GND to VCC+0.5 V

Storage Temperature
to +150 °C

NOTE This parameter is measured at characterization but not tested.

IOUT DC Output Current
to +60 mA

Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
ORDERING INFORMATION

IDT74FCT XXXX

Device Type Package

X Temp. Range

INDUSTRIAL TEMPERATURE RANGE

Industrial -40°C to +85°C

Shrink Small Outline IC

Quarter-size Small Outline IC

QSOP - Green
20807 1-to-10 2.5V Clock Driver

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138
for SALES 800-345-7015 or 408-284-8200 fax 408-284-2775
for Tech Support:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IDT74FCT20807PYI8 Datasheet file may be downloaded here without warranties.

Datasheet ID: IDT74FCT20807PYI8 637370