IDT23S05E-1HDC8

IDT23S05E-1HDC8 Datasheet

IDT23S05E 3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM

Part	Datasheet
IDT23S05E-1HDC8	IDT23S05E-1HDC8 (pdf)

Related Parts	Information
IDT23S05E-1HDC	IDT23S05E-1HDC
IDT23S05E-1HDCI8	IDT23S05E-1HDCI8
IDT23S05E-1DCI8	IDT23S05E-1DCI8
IDT23S05E-1DCI	IDT23S05E-1DCI
IDT23S05E-1DC8	IDT23S05E-1DC8
IDT23S05E-1DC	IDT23S05E-1DC
IDT23S05E-1HDCI	IDT23S05E-1HDCI

PDF Datasheet Preview
IDT23S05E 3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE IDT23S05E FEATURES: • Phase-Lock Loop Clock Distribution • 10MHz to 200MHz operating frequency • Distributes one clock input to one bank of five outputs • Zero Input-Output Delay • Output Skew < 250ps • Low jitter <200 ps cycle-to-cycle • IDT23S05E-1 for Standard Drive • IDT23S05E-1H for High Drive • No external RC network required • Operates at 3.3V VDD • Power down mode • Spread spectrum compatible • Available in SOIC package NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 DESCRIPTION: The IDT23S05E is a high-speed phase-lock loop PLL clock buffer, designed to address high-speed clock distribution applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 200MHz. The IDT23S05E is an 8-pin version of the IDT23S09E. IDT23S05E accepts one reference input, and drives out five low skew clocks. The -1H version of this device operates up to 200MHz frequency and has a higher drive than the -1 device. All parts have on-chip PLLs which lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad. In the absence of an input clock, the IDT23S05E enters power down. In this mode, the device will draw less than 12µA for Commercial Temperature range and less than 25µA for Industrial tempera- ture range, the outputs are tri-stated, and the PLL is not running, resulting in a significant reduction of power. The IDT23S05E is characterized for both Industrial and Commercial operation. FUNCTIONAL BLOCK DIAGRAM REF 1 PLL Control Logic 8 CLKOUT 3 CLK1 2 CLK2 5 CLK3 7 CLK4 The IDT logo is a registered trademark of Integrated Device Technology, Inc. COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 1 c 2006 Integrated Device Technology, Inc. AUGUST 2009 DSC - 6398/7 IDT23S05E 3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM PIN CONFIGURATION CLK2 CLK1 CLKOUT CLK4 CLK3 SOIC TOP VIEW APPLICATIONS: • SDRAM • Telecom • Datacom • PC Motherboards/Workstations • Critical Path Delay Designs COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES ABSOLUTE MAXIMUM RATINGS 1 ORDERING INFORMATION Device Type Package Process COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES Blank I Commercial 0oC to +70oC Industrial -40oC to +85oC DC DCG Small Outline SOIC - Green 23S05E-1 Zero Delay Clock Buffer with High Drive Output, 23S05E-1H Spread Spectrum Compatible NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Part / Order Number Shipping Packaging 23S05E-1DC 23S05E-1DC8* 23S05E-1DCI* 23S05E-1DCI8* 23S05E-1HDC* 23S05E-1HDC8* 23S05E-1HDCI* 23S05E-1HDCI8* 23S05E-1DCG 23S05E-1DCG8 23S05E-1DCGI 23S05E-1DCGI8 23S05E-1HDCG 23S05E-1HDCG8 23S05E-1HDCGI 23S05E-1HDCGI8 Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138 for SALES 800-345-7015 or 408-284-8200 fax 408-284-2775 for Tech Support:

PDF Datasheet Preview

IDT23S05E 3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE

IDT23S05E

FEATURES:
• Phase-Lock Loop Clock Distribution
• 10MHz to 200MHz operating frequency
• Distributes one clock input to one bank of five outputs
• Zero Input-Output Delay
• Output Skew < 250ps
• Low jitter <200 ps cycle-to-cycle
• IDT23S05E-1 for Standard Drive
• IDT23S05E-1H for High Drive
• No external RC network required
• Operates at 3.3V VDD
• Power down mode
• Spread spectrum compatible
• Available in SOIC package

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

DESCRIPTION:

The IDT23S05E is a high-speed phase-lock loop PLL clock buffer, designed to address high-speed clock distribution applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 200MHz.

The IDT23S05E is an 8-pin version of the IDT23S09E. IDT23S05E accepts one reference input, and drives out five low skew clocks. The -1H version of this device operates up to 200MHz frequency and has a higher drive than the -1 device. All parts have on-chip PLLs which lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad. In the absence of an input clock, the IDT23S05E enters
power down. In this mode, the device will draw less than 12µA for

Commercial Temperature range and less than 25µA for Industrial tempera-
ture range, the outputs are tri-stated, and the PLL is not running, resulting in a significant reduction of power.

The IDT23S05E is characterized for both Industrial and Commercial
operation.

FUNCTIONAL BLOCK DIAGRAM

REF 1

PLL Control

Logic
8 CLKOUT
3 CLK1
2 CLK2
5 CLK3
7 CLK4

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 1
c 2006 Integrated Device Technology, Inc.

AUGUST 2009

DSC - 6398/7

IDT23S05E 3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM

PIN CONFIGURATION

CLK2

CLK1

CLKOUT

CLK4

CLK3

SOIC TOP VIEW

APPLICATIONS:
• SDRAM
• Telecom
• Datacom
• PC Motherboards/Workstations
• Critical Path Delay Designs

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES

ABSOLUTE MAXIMUM RATINGS 1
ORDERING INFORMATION

Device Type Package Process

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES

Blank I

Commercial 0oC to +70oC Industrial -40oC to +85oC

DC DCG

Small Outline SOIC - Green
23S05E-1 Zero Delay Clock Buffer with High Drive Output, 23S05E-1H Spread Spectrum Compatible
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Part / Order Number

Shipping Packaging
23S05E-1DC* 23S05E-1DC8* 23S05E-1DCI* 23S05E-1DCI8* 23S05E-1HDC* 23S05E-1HDC8* 23S05E-1HDCI* 23S05E-1HDCI8* 23S05E-1DCG 23S05E-1DCG8 23S05E-1DCGI 23S05E-1DCGI8 23S05E-1HDCG 23S05E-1HDCG8 23S05E-1HDCGI 23S05E-1HDCGI8

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C

CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138
for SALES 800-345-7015 or 408-284-8200 fax 408-284-2775
for Tech Support:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IDT23S05E-1HDC8 Datasheet file may be downloaded here without warranties.

Datasheet ID: IDT23S05E-1HDC8 637253