ICS854057AGLFT
ICS854057AGLFT Datasheet
ICS854057
| Part | Datasheet |
|---|---|
ICS854057AGLFT |
ICS854057AGLFT (pdf) |
| Related Parts | Information |
|---|---|
|
ICS854057AGLF |
ICS854057AGLF |
| PDF Datasheet Preview |
|---|
| Integrated Circuit Systems, Inc. ICS854057 4:1 OR 2:1 LVDS CLOCK MULTIPLEXER WITH INTERNAL INPUT TERMINATION The ICS854057 is a 4:1 or 2:1 LVDS Clock Mul- tiplexer which can operate up to 2GHz and is a HiPerClockS member of the HiPerClockS family of High Per- formance Clock Solutions from ICS. The PCLK, nPCLK pairs can accept most standard differen- tial input levels. Internal termination is provided on each dif- ferential input pair. The ICS854057 operates using a 2.5V sup- ply voltage. The fully differential architecture and low propa- gation delay make it ideal for use in high speed multiplexing applications. The select pins have internal pulldown resistors. Leaving one input unconnected pulled to logic low by the in- ternal resistor will transform the device into a 2:1 multiplexer. The SEL1 pin is the most significant bit and the binary num- ber applied to the select pins will select the same numbered data input i.e., 00 selects PCLK0, nPCLK0 . • High speed differential multiplexer.The device can be configured as either a 4:1 or 2:1 multiplexer • Single LVDS output • 4 selectable PCLK, nPCLK inputs with internal termination • PCLK, nPCLK pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL • Output frequency >2GHz • Part-to-part skew 200ps maximum • Propagation delay 800ps maximum • Additive phase jitter, RMS 66fs typical • 2.5V operating supply • -40°C to 85°C ambient operating temperature • Available in both, Standard and RoHS/Lead-Free compliant packages BLOCK DIAGRAM VT0 50 PCLK0 nPCLK0 50 PCLK1 nPCLK1 VT2 50 PCLK2 nPCLK2 50 PCLK3 nPCLK3 SEL1 Pulldown SEL0 Pulldown 854057AG PIN ASSIGNMENT VDD 1 PCLK0 2 VT0 3 nPCLK0 4 SEL1 5 SEL0 6 PCLK1 7 VT1 8 nPCLK1 9 GND 10 20 VDD 19 PCLK3 18 VT3 17 nPCLK3 16 Q 15 nQ 14 PCLK2 13 VT2 12 nPCLK2 11 GND ICS854057 20-Lead TSSOP 4.40mm x 6.50mm x 0.925mm body package G Package Top View TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature 854057AG ICS854057AG 20 lead TSSOP tube -40°C to 85°C 854057AGT ICS854057AG 20 lead TSSOP 2500 tape & reel -40°C to 85°C 854057AGLF ICS854057AGL 20 lead "Lead-Free" TSSOP tube -40°C to 85°C 854057AGLFT ICS854057AGL 20 lead "Lead-Free" TSSOP 2500 tape & reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. The aforementioned trademark, HiPerClockS is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated ICS assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. 854057AG |
| More datasheets: IDT3CP0C02-24NSGET | IDT3CP0C02-30NSGET | IDT3CP0C02-75NSGET | IDT3CP0C02-62.5NSGET | IDT3CP0C02-8NSGET | IDT3CP0C02-96NSGET | IDT3CP0C02-16NSGET | DD-50S-A191-A197 | DDM-36W4P-K127 | ICS854057AGLF |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS854057AGLFT Datasheet file may be downloaded here without warranties.