ICS853111BYLF

ICS853111BYLF Datasheet

ICS853111B

Part	Datasheet
ICS853111BYLF	ICS853111BYLF (pdf)

Related Parts	Information
ICS853111BYLFT	ICS853111BYLFT

PDF Datasheet Preview
LOW SKEW, 1-TO-10, DIFFERENTIAL-TO2.5V, 3.3V LVPECL/ECL FANOUT BUFFER ICS853111B The ICS853111B is a low skew, high perfor- mance 1-to-10 Differential-to-2.5V/3.3V LVPECL/ HiPerClockS E C L Fa n o u t B u f e r a n d a m e m b e r o f t h e HiPerClock S family of High Performance Clock Solutions from ICS. The ICS853111B is characterized to operate from either a 2.5V or a 3.3V power supply. Guaranteed output and par t-to-par t skew characteristics make the ICS853111B ideal for those clock distribution applications demanding well defined perfor- mance and repeatability. • Ten differential 2.5V/3.3V LVPECL / ECL outputs • Two selectable differential input pairs • PCLKx, nPCLKx pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL • Maximum output frequency >3GHz • Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLK input • Output skew 20ps typical • Part-to-part skew 85ps typical • Propagation delay 495ps typical • Jitter, RMS < 0.03ps typical • LVPECL mode operating voltage supply range VCC = 2.375V to 3.8V, VEE = 0V • ECL mode operating voltage supply range VCC = 0V, VEE = -3.8V to -2.375V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages BLOCK DIAGRAM PCLK0 nPCLK0 Q0 nQ0 PCLK1 nPCLK1 Q2 nQ2 CLK_SEL Q5 nQ5 Q6 nQ6 Q7 nQ7 Q8 nQ8 Q9 nQ9 PIN ASSIGNMENT VCCO nQ2 Q2 nQ1 Q1 nQ0 TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature ICS853111BY ICS853111BY 32 lead TQFP, E-PAD tray -40°C to 85°C ICS853111BYT ICS853111BY 32 lead TQFP, E-PAD 1000 tape & reel -40°C to 85°C ICS853111BYLF ICS853111BYLF "Lead Free" 32 lead TQFP, E-PAD tray -40°C to 85°C ICS853111BYLFT ICS853111BYLF "Lead Free" 32 lead TQFP, E-PAD 1000 tape & reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS 1-TO-10, LVPECL/ECL FANOUT BUFFER ICS853111B LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER T4C B Page 9 17 1 16 17 10 16 Description of Change Corrected Figure 3C. Added "Lead Free" Part/Order Number rows. Features Section - added Lead-Free bullet. Package Dimensions - corrected dimensions D2/E2 to read 3.5mm from Ordering Information Table - corrected Lead-Free marking and added Lead-Free note. LVPECL DC Characteristics Table - corrected VIH max. 85° 1.56V from -0.83V. Added Recommendations for Unused Input and Output Pins. Package Dimensions - added dimensions D3/E3. Date 11/13/03 6/16/05 9/5/07 IDT / ICS 1-TO-10, LVPECL/ECL FANOUT BUFFER ICS853111B LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support 480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851 2007 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo, ICS and HiPerClocks are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW SKEW, 1-TO-10, DIFFERENTIAL-TO2.5V, 3.3V LVPECL/ECL FANOUT BUFFER

ICS853111B

The ICS853111B is a low skew, high perfor-
mance 1-to-10 Differential-to-2.5V/3.3V LVPECL/

HiPerClockS E C L Fa n o u t B u f e r a n d a m e m b e r o f t h e

HiPerClock S family of High Performance

Clock Solutions from ICS. The ICS853111B
is characterized to operate from either a 2.5V or a 3.3V
power supply. Guaranteed output and par t-to-par t skew
characteristics make the ICS853111B ideal for those clock
distribution applications demanding well defined perfor-
mance and repeatability.
• Ten differential 2.5V/3.3V LVPECL / ECL outputs
• Two selectable differential input pairs
• PCLKx, nPCLKx pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL
• Maximum output frequency >3GHz
• Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLK input
• Output skew 20ps typical
• Part-to-part skew 85ps typical
• Propagation delay 495ps typical
• Jitter, RMS < 0.03ps typical
• LVPECL mode operating voltage supply range VCC = 2.375V to 3.8V, VEE = 0V
• ECL mode operating voltage supply range VCC = 0V, VEE = -3.8V to -2.375V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6 packages

BLOCK DIAGRAM

PCLK0 nPCLK0

Q0 nQ0

PCLK1
nPCLK1

Q2 nQ2

CLK_SEL

Q5 nQ5

Q6 nQ6

Q7 nQ7

Q8 nQ8

Q9 nQ9

PIN ASSIGNMENT

VCCO nQ2

Q2 nQ1

Q1 nQ0
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature

ICS853111BY

ICS853111BY
32 lead TQFP, E-PAD
tray
-40°C to 85°C

ICS853111BYT

ICS853111BY
32 lead TQFP, E-PAD
1000 tape & reel
-40°C to 85°C

ICS853111BYLF

ICS853111BYLF "Lead Free" 32 lead TQFP, E-PAD
tray
-40°C to 85°C

ICS853111BYLFT ICS853111BYLF "Lead Free" 32 lead TQFP, E-PAD
1000 tape & reel
-40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS 1-TO-10, LVPECL/ECL FANOUT BUFFER

ICS853111B LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER

T4C B

Page 9 17 1 16 17
10 16
Description of Change Corrected Figure 3C. Added "Lead Free" Part/Order Number rows. Features Section - added Lead-Free bullet. Package Dimensions - corrected dimensions D2/E2 to read 3.5mm from Ordering Information Table - corrected Lead-Free marking and added Lead-Free note. LVPECL DC Characteristics Table - corrected VIH max. 85° 1.56V from -0.83V. Added Recommendations for Unused Input and Output Pins. Package Dimensions - added dimensions D3/E3.

Date 11/13/03 6/16/05
9/5/07

IDT / ICS 1-TO-10, LVPECL/ECL FANOUT BUFFER

ICS853111B LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851
2007 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo, ICS and HiPerClocks are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853111BYLF Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS853111BYLF 637162