ICS853111AV-01LFT

ICS853111AV-01LFT Datasheet


ICS853111-01

Part Datasheet
ICS853111AV-01LFT ICS853111AV-01LFT ICS853111AV-01LFT (pdf)
Related Parts Information
ICS853111AV-01LF ICS853111AV-01LF ICS853111AV-01LF
PDF Datasheet Preview
ICS853111-01

LOW SKEW, 1-TO-9 DIFFERENTIAL-TO-3.3V LVPECL/ECL FANOUT BUFFER

The ICS853111-01 is a low skew, high perfor-
mance 1-to-9 Differential-to-3.3V LVPECL/ECL

HiPerClockS Fa n o u t B u f e r a n d a m e m b e r o f t h e

HiPerClockS family of High Performance

Clock Solutions from IDT. The PCLK, nPCLK
pair can accept LVPECL, CML and SSTL differential input
levels.The ICS853111-01 is characterized to operate from
a 3.3V power supply. Guaranteed output and part-to-par t
skew characteristics make the ICS853111-01 ideal for
those clock distribution applications demanding well
defined performance and repeatability.
• 9 differential 3.3V LVPECL / ECL outputs
• 1 differential LVPECL input pair
• PLCK, nPLCK pair can accept the following differential input levels LVPECL, LVDS, CML, SSTL
• Maximum output frequency >2GHz typical
• Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLK input
• Additive phase jitter, RMS 0.03ps typical
• Output skew 35ps maximum
• Part-to-part skew 300ps maximum
• Propagation delay 675ps maximum
• LVPECL mode operating voltage supply range VCC = 3V to 3.8V, VEE = 0V
• ECL mode operating voltage supply range VCC = 0V, VEE = -3V to -3.8V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS5 and lead-free RoHS 6 packages

BLOCK DIAGRAM

PCLK nPCLK

PIN ASSIGNMENT
nQ2 Q2
nQ1 VCCO

Q1 nQ0

Q0 nQ0

Q1 nQ1
25 24 23 22 21 20 19

VEE 26
18 Q3
nc 27
17 nQ3

PCLK 28
16 Q4
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature
853111AV-01

ICS853111AV-01
28 Lead PLCC

Tube
-40°C to 85°C
853111AV-01T

ICS853111AV-01
28 Lead PLCC
500 Tape & Reel -40°C to 85°C
853111AV-01LF

ICS853111AV01L
28 Lead "Lead-Free" PLCC

Tube
-40°C to 85°C
853111AV-01LFT

ICS853111AV01L
28 Lead "Lead-Free" PLCC 500 Tape & Reel -40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the pat number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
853111AV-01

ICS853111-01

LOW SKEW, 1-TO-9 DIFFERENTIAL-TO-3.3V LVPECL/ECL FANOUT BUFFER

Page 1 5 14
Description of Change Features Section - added Lead-Free bullet. Added Additive Phase jitter section. Ordering Information Table - Added Lead-free marking

Date 4/25/05 11/14/07
853111AV-01
More datasheets: MS-3150 | MS-3600 | MS-3250 | MS-3300LF | MS-4120 | MS-4140 | MS-0100 | MS-3101 | MS-4110 | 11014


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853111AV-01LFT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS853111AV-01LFT 637159