ICS853013AMLFT

ICS853013AMLFT Datasheet

ICS853013

Part	Datasheet
ICS853013AMLFT	ICS853013AMLFT (pdf)

Related Parts	Information
ICS853013AMLF	ICS853013AMLF

PDF Datasheet Preview
LOW SKEW, DUAL, 1-TO-3, DIFFERENTIAL-TO2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER ICS853013 The ICS853013 is a low skew, high performance dual 1-to-3 Differential-to-2.5V/3.3V/5V LVPECL/ HiPerClockS ECL Fanout Buffer and a member of the HiperclocksTM family of High Performance Clock Solutions from IDT. The ICS853013 operates with a positive or negative power supply at 2.5V, 3.3V, or 5V. Guaranteed output and part-to-part skew characteristics make the ICS853013 ideal for those clock distribution applications demanding well defined performance and repeatability. • Two differential LVPECL/ECL bank outputs • Two differential LVPECL clock input pairs • PCLKx, nPCLKx pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL • Output frequency >2GHz typical • Translates any single-ended input signal to LVPECL levels with resistor bias on nPCLKx input • Output skew 40ps maximum • Part-to-part skew 250ps maximum • Propagation delay 5780ps maximum • Additive phase jitter, RMS 0.03ps typical • LVPECL mode operating voltage supply range: VCC = 2.375V to 5.25V, VEE = 0V • ECL mode operating voltage supply range: VCC = 0V, VEE = -5.25V to -2.375V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages Block Diagram PCLKA Pulldown nPCLKA Pullup/Pulldown PCLKB Pulldown nPCLKB Pullup/Pulldown QA0 nQA0 QA1 nQA1 QA2 nQA2 QB0 nQB0 QB1 nQB1 QB2 nQB2 IDT / ICS 2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER Pin Assignment nQA0 1 QA0 2 VCC 3 PCLKA 4 nPCLKA 5 PCLKB 6 nPCLKB 7 VCC 8 nQB0 9 QB0 10 20 QA1 19 nQA1 18 QA2 17 nQA2 16 VCC 15 QB2 14 nQB2 13 QB1 12 nQB1 11 VEE ICS853013 20-Lead SOIC 7.5mm x 12.8mm x 2.3mm package body M Package Top View ICS853013 LOW SKEW, DUAL,1-TO-3, DIFFERENTIAL-TO-2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER Table Pin Descriptions Ordering Information Table Ordering Information Part/Order Number 853013AM 853013AMT 853013AMLF 853013AMLFT Marking ICS853013AM ICS853013AMLF Package 20 Lead SOIC 20 Lead SOIC “Lead-Free” 20 Lead SOIC “Lead-Free” 20 Lead SOIC Shipping Packaging Tube 1000 Tape & Reel Tube 1000 Tape & Reel Temperature -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C NOTE Parts that are ordered with an “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications, such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS 2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER ICS853013 LOW SKEW, DUAL,1-TO-3, DIFFERENTIAL-TO-2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER Table Page Description of Change Added Recommendations for Unused Input and Output Pins. 16 Ordering Information Table - added Lead-Free marking. 3.3V LVPECL DC Characteristics - changed IIH max. from 150µA to 200µA. Changed IIL min. from -150µA to -200µA. 2.5V LVPECL DC Characteristics - changed IIH max. from 150µA to 200µA. Changed IIL min. from -150µA to -200µA. 5V LVPECL DC Characteristics - changed IIH max. from 150µA to 200µA. Changed IIL min. from -150µA to -200µA. ECL DC Characteristics - changed IIH max. from 150µA to 200µA. Changed IIL min. from -150µA to -200µA. Updated LVPECL Clock Input Interface Section. 12 Added Termination for 5V LVPECL Outputs. 13 Power Considerations - updated Junction Temperature equation with worst case thermal resistance of 46.2°C/W. Date 10/19/05 2/7/08 IDT / ICS 2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER ICS853013 LOW SKEW, DUAL,1-TO-3, DIFFERENTIAL-TO-2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support 480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Integrated Device Technology IDT S Pte. Ltd. 1 Kallang Sector, #07-01/06 Kolam Ayer Industrial Park Singapore 349276 +65 67443356 Fax +65 67441764 Japan NIPPON IDT KK Sanbancho Tokyu, Bld. 7F, 8-1 Sanbancho Chiyoda-ku, Tokyo 102-0075 +81 3 3221 9822 Fax +81 3 3221 9824 Europe IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 37885 2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW SKEW, DUAL, 1-TO-3, DIFFERENTIAL-TO2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER

ICS853013

The ICS853013 is a low skew, high performance
dual 1-to-3 Differential-to-2.5V/3.3V/5V LVPECL/

HiPerClockS ECL Fanout Buffer and a member of the

HiperclocksTM family of High Performance Clock

Solutions from IDT. The ICS853013 operates with a
positive or negative power supply at 2.5V, 3.3V, or 5V. Guaranteed
output and part-to-part skew characteristics make the ICS853013
ideal for those clock distribution applications demanding well
defined performance and repeatability.
• Two differential LVPECL/ECL bank outputs
• Two differential LVPECL clock input pairs
• PCLKx, nPCLKx pairs can accept the following
differential input levels LVPECL, LVDS, CML, SSTL
• Output frequency >2GHz typical
• Translates any single-ended input signal to LVPECL levels with
resistor bias on nPCLKx input
• Output skew 40ps maximum
• Part-to-part skew 250ps maximum
• Propagation delay 5780ps maximum
• Additive phase jitter, RMS 0.03ps typical
• LVPECL mode operating voltage supply range:

VCC = 2.375V to 5.25V, VEE = 0V
• ECL mode operating voltage supply range:

VCC = 0V, VEE = -5.25V to -2.375V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6
packages

Block Diagram

PCLKA Pulldown nPCLKA Pullup/Pulldown

PCLKB Pulldown nPCLKB Pullup/Pulldown

QA0 nQA0 QA1 nQA1 QA2 nQA2

QB0 nQB0 QB1 nQB1 QB2 nQB2

IDT / ICS 2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER

Pin Assignment
nQA0 1 QA0 2 VCC 3

PCLKA 4 nPCLKA 5

PCLKB 6 nPCLKB 7

VCC 8 nQB0 9

QB0 10
20 QA1 19 nQA1
18 QA2 17 nQA2 16 VCC 15 QB2 14 nQB2 13 QB1
12 nQB1 11 VEE

ICS853013
20-Lead SOIC 7.5mm x 12.8mm x 2.3mm package body

M Package Top View

ICS853013 LOW SKEW, DUAL,1-TO-3, DIFFERENTIAL-TO-2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER

Table Pin Descriptions
Ordering Information
Table Ordering Information

Part/Order Number 853013AM 853013AMT 853013AMLF 853013AMLFT

Marking ICS853013AM ICS853013AMLF

Package 20 Lead SOIC 20 Lead SOIC “Lead-Free” 20 Lead SOIC “Lead-Free” 20 Lead SOIC

Shipping Packaging Tube
1000 Tape & Reel Tube
1000 Tape & Reel

Temperature -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C

NOTE Parts that are ordered with an “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications, such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS 2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER

ICS853013 LOW SKEW, DUAL,1-TO-3, DIFFERENTIAL-TO-2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER

Table

Page Description of Change

Added Recommendations for Unused Input and Output Pins.
16 Ordering Information Table - added Lead-Free marking.
3.3V LVPECL DC Characteristics - changed IIH max. from 150µA to 200µA.

Changed IIL min. from -150µA to -200µA.
2.5V LVPECL DC Characteristics - changed IIH max. from 150µA to 200µA.

Changed IIL min. from -150µA to -200µA.
5V LVPECL DC Characteristics - changed IIH max. from 150µA to 200µA.

Changed IIL min. from -150µA to -200µA.

ECL DC Characteristics - changed IIH max. from 150µA to 200µA.

Changed IIL min. from -150µA to -200µA.

Updated LVPECL Clock Input Interface Section.
12 Added Termination for 5V LVPECL Outputs.
13 Power Considerations - updated Junction Temperature equation with worst
case thermal resistance of 46.2°C/W.

Date 10/19/05
2/7/08

IDT / ICS 2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER

ICS853013 LOW SKEW, DUAL,1-TO-3, DIFFERENTIAL-TO-2.5V, 3.3V, 5V LVPECL/ECL FANOUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia

Integrated Device Technology IDT S Pte. Ltd. 1 Kallang Sector, #07-01/06 Kolam Ayer Industrial Park Singapore 349276 +65 67443356 Fax +65 67441764

Japan

NIPPON IDT KK Sanbancho Tokyu, Bld. 7F, 8-1 Sanbancho Chiyoda-ku, Tokyo 102-0075 +81 3 3221 9822 Fax +81 3 3221 9824

Europe

IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 37885
2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853013AMLFT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS853013AMLFT 637151